How to decorate the ceiling of the conference room?

1, according to flexible membrane ceiling, stretched membrane ceiling, pulled ceiling, flexible ceiling, transparent membrane modeling, ceiling art, ceiling height and how to install flexible membrane ceiling, select optical fiber heads with appropriate diameters, calculate the number of optical fiber heads to be installed per square meter, and then determine the number of optical fiber lamps.

2. Determine the position of the optical fiber machine: the optical fiber machine should be placed at the edge of the flexible membrane ceiling, ceiling, ceiling, ceiling, ceiling, ceiling, ceiling, ceiling and other inconspicuous places to facilitate future maintenance.

3. If the plane is full of stars, pull the cable to fix the optical fiber head. If it is curved all over the sky, the optical fiber head should be fixed with a screen.

4. The distance between the optical fiber head and the node where the optical fiber is fixed on the iron wire should be as short as possible, so that when the optical fiber head is adjusted up and down, the position of the optical fiber head cannot be adjusted because of the softness of the optical fiber, thus affecting the overall effect of the sky.

5. The method of fixing the optical fiber on the iron wire must make the optical fiber move up and down, so that the optical fiber head can be adjusted in the horizontal position of the soft film.

6. The optical fiber head should be hung in the horizontal position or slightly above the soft film as far as possible. How to install the flexible membrane ceiling, so as to install the flexible membrane ceiling, pull the membrane ceiling, pull the ceiling, and do the transparent membrane modeling of the flexible ceiling. It's easy to find the optical fiber head after washing the ceiling.

7. Install soft film ceiling, pull film ceiling, pull ceiling, flexible ceiling, transparent film modeling, ceiling art, shower ceiling, turn on the optical fiber lamp to find the light spot of the optical fiber head, open a hole on the light spot with a pointed soldering iron, and adjust the horizontal position of the optical fiber head on the soft film.

8. The problem to pay attention to when installing Mantianxing is that the soft film can only be partially disassembled, and the whole piece cannot be disassembled twice.