How does the whole French window glass of a tall building move?

Now people decorate, and some materials begin to pay attention to the bigger the better, such as floor tiles and glass. We often notice that some high-rise floor-to-ceiling windows are designed as a whole. How is the whole floor-to-ceiling glass transported?

The whole French window glass can be transported according to the width and height of the glass. Commonly used modes of transportation are elevators, hanging ropes, hanging fences and cranes.

1: The elevator carries the whole glass. Generally, the elevator width in high-rise residential areas is 800x2 100mm and 900x2 100mm, and the height inside the elevator is between 2200 mm and 2300 mm, so if you want to transport the whole glass to high-rise buildings by elevator, the width and height of the glass are limited. Theoretically, the width and height of glass are 900 mm

Note: With the help of the glass in the elevator passage, pay attention to avoid the glass hitting the elevator, so as to avoid leaving traces inside the elevator and protect public property.

2. Hanging rope to transport glass In many mature communities, hanging ropes will be installed on the roof of each unit, which is convenient for residents to buy some large materials and articles. They can't be transported by elevator, but can only be tied with hanging ropes.

When materials and articles are transported by hanging ropes, there is basically no limit on the width and height, as long as they can enter the balcony of the user, but there is a certain limit on the weight.

The hanging rope is a steel wire rope, which can be transported by pulling it by manpower. When the weight exceeds the cable weight, it is completely impossible. On the other hand, the rope is pulled by manpower, and it is also very dangerous when its weight exceeds the same pulling force of one or two people. The higher an object is, the heavier it is affected by gravity.

It is suggested that glass or other articles should be transported by hanging rope, and the weight should not exceed 200 ~ 300 g. At least three people can complete the hanging rope transportation, two people pull it, and one person pulls the protective rope to prevent shaking.

3. Hanger transportation Hanger and sling are actually a principle, the difference is that one depends on manpower and the other depends on machinery. Hanging rails is safer than hanging ropes.

There is also a certain weight limit for rail transportation. It is suggested that the weight of hanging rail with normal length of 4 ~ 6 meters should not exceed 300kg.

4. Crane transportation

It is the safest and most convenient way to transport the whole floor-to-ceiling glass by crane, which is smooth and fast.

However, these aspects should also be considered when using heavy cranes to transport high-rise glass or articles. First, the affordability. Cranes are charged according to the distance and the lifted items. The starting price of medium-sized cranes is 400 ~ 600 yuan, that is, as long as the crane is called, the starting price will be charged at the place. On the other hand, according to the time, the longer the time, the more charges. Even if a piece is not hung up, there will be a charge for waiting for a few hours. The third point is to ask the crane to lift it, depending on the environment at the bottom of the building, to see if it can accommodate the crane, so as not to let the car make a phone call, there is no place for the car to stay, not to lift it, and to get the start-up fee of the crane.

Conclusion: Under the premise of not being overweight, users are advised to install large integral glass in high-rise buildings, which is also convenient for the installation and fixation of glass. Considering both economy and safety, hanging rail is the safest and most economical. I wonder if you have any better suggestions on this issue. Welcome to share your message. Thank you.