How to make an electronic seal

Question 1: How to make the electronic official seal? The method of electronic seal:

1) First, cover the seal to be used by Ping Han on white paper and scan it into an electronic file;

2) cut the scanned electronic file into qualified size and store it in JGP format;

3) When you want to use it at ordinary times, just insert a picture in WORD or EXCEL;

4) If you want to overwrite the text, you can right-click the picture and set the format of the picture, and set the layout of the picture to float above the text;

5) Select the "Set Transparent Color" tool in the format toolbar of the picture, click in the blank space of the picture, and the electronic seal will only see the content;

This way, it looks like a real chapter.

Question 2: How to make an electronic seal? How to mark the electronic seal 10:

1) First of all, put the usual seal on white paper and scan it into an electronic file;

2) cut the scanned electronic file into qualified size and store it in JGP format;

3) When you want to use it at ordinary times, just insert a picture in WORD or EXCEL;

4) If you want to overwrite the text, you can right-click the picture, format the picture, and set the layout of the picture to float above the text.

5) Select the "Set Transparent Color" tool in the format toolbar of the picture, click in the blank space of the picture, and the electronic seal will only see the content.

6) It's like a real stamp when it's covered. Just try it.

Question 3: How to make an electronic seal 1 with word? Select the "ellipse" tool and drag the mouse while holding down the "Shift" key to get a perfect circle. Double-click the circle to open the Format AutoShape dialog box. In the Colors and Lines tab, select No Fill Color as the fill color, set the line color to red, and select a 3-pound single line. In the Dimensions tab, the height and width are set to 4. 1cm. 2. For "Insert-Picture-WordArt", select the shape of "Thin and Curved" (the third in the first line) and select "OK". Enter the official seal name. Format WordArt: In the Colors and Lines tab, select red as the fill color and red as the line color; In the Dimensions tab, set the height and width to 3.2cm；; In the Layout tab, select Floating on Text. Move the WordArt into the circle, pull the yellow control point, and extend the text to the appropriate position in the lower semicircle. To lengthen (or flatten) the word, select "Thick Ring" from "WordArt Shape" and then pull the yellow control point to the appropriate position. At this time, if the word is not centered, you can rotate the center. 3. Select "Five-pointed Star" from "Optional Graphics-Stars and Flags". Double-click the five-pointed star to open the Format AutoShape dialog box. In the Colors and Lines tab, select red as the fill color and red as the line color. On the Size tab, select Lock Aspect Ratio and change the width to1.4cm.. Move the pentagram to the center of the circle. 4. "Insert-Picture-WordArt", select the first style, and then "OK". Enter the department name. Format WordArt: In the Colors and Lines tab, select red as the fill color and red as the line color; In the "Dimensions" tab, check "Lock Aspect Ratio" and set the width to 2.3cm；; In the Layout tab, select Floating on Text. Move the WordArt to the appropriate position in the circle. 5. Select all official seals and right-click "Combination-Combination". Cancel selection. The above dimensions are set by myself, and you can set them according to the actual situation.

Question 4: How to make an electronic official seal? You can use a word document. It takes a long time to insert an optional figure, draw a circle, insert a wordart, enter the name of the unit, and adjust the radian of the shape by yourself.

Question 5: How to make an electronic seal on the computer? Download a seal making software and you can make it.

Question 6: How to make an electronic seal in WORD The method of making an electronic seal in Word is not as flexible as PS, but it can basically solve the problem.

1. Click the "Insert WordArt" button in the drawing toolbar in the Word document and enter "Baidu Experience Excellent Experience Recommendation"? Choose a WordArt style? In the first row and the third column, click the word spacing, that is, increase the word spacing and confirm.

2. Right-click and select Format WordArt. On the Dimensions tab, set the height and width to 5cm.

3. Set the line color to red in the Colors and Lines tab.

4. Set the text wrapping mode to "Floating on the text" under the Layout option, and a yellow handle will appear. Drag with the mouse to modify the wrapping degree of the text.

5. Click AutoShape in the drawing toolbar, select the five-pointed star under Stars and Flags in the drop-down list, and draw the five-pointed star.

6. Select the five-pointed star, set the size according to your own requirements in the "AutoShape Format", set the color and line tabs, and the fill color is red and the line color is red. The layout of the five-pointed star is set to "all around" or "compact". Use CTRL and arrow keys to fine-tune its position at the same time. The effect is shown in the figure.

7. On the Drawing toolbar, click the oval button. In the editing area, hold down the left mouse button and draw an ellipse. Remember to hold down shift and draw a perfect circle. Select the circle, right-click, and select Format AutoShape. Set the size and fill color as needed. Set the transparency to 100%, the line color to red, and the line thickness to 4.5 points.

8. Adjust the object and fine-tune it with the help of the Ctrl key. The method of fine-tuning is: select the object to be fine-tuned, hold down Ctrl, and then hold down one of the four direction keys on the keyboard until you are satisfied.

9. Combination: Start the "Select Object" button on the drawing toolbar, circle the whole seal object, polish one of the objects, and then click the right mouse button.

Question 7: How to make an electronic seal 1? Select the Ellipse tool, hold down the Shift key and drag the mouse to get a perfect circle. Double-click the circle to open the Format AutoShape dialog box. In the Colors and Lines tab, select No Fill Color as the fill color, set the line color to red, and select a 3-pound single line. In the Dimensions tab, the height and width are set to 4. 1cm. 2. For "Insert-Picture-WordArt", select the shape of "Thin and Curved" (the third in the first line) and select "OK". Enter the official seal name. Format WordArt: In the Colors and Lines tab, select red as the fill color and red as the line color; In the Dimensions tab, set the height and width to 3.2cm；; In the Layout tab, select Floating on Text. Move the WordArt into the circle, pull the yellow control point, and extend the text to the appropriate position in the lower semicircle. To lengthen (or flatten) the word, select "Thick Ring" from "WordArt Shape" and then pull the yellow control point to the appropriate position. At this time, if the word is not centered, you can rotate the center. 3. Select "Five-pointed Star" from "Optional Graphics-Stars and Flags". Double-click the five-pointed star to open the Format AutoShape dialog box. In the Colors and Lines tab, select red as the fill color and red as the line color. On the Size tab, select Lock Aspect Ratio and change the width to1.4cm.. Move the pentagram to the center of the circle. 4. "Insert-Picture-WordArt", select the first style, and then "OK". Enter the department name. Format WordArt: In the Colors and Lines tab, select red as the fill color and red as the line color; In the "Dimensions" tab, check "Lock Aspect Ratio" and set the width to 2.3cm；; In the Layout tab, select Floating on Text. Move the WordArt to the appropriate position in the circle. 5. Select all official seals and right-click "Combination-Combination". Cancel selection. The above dimensions are set by myself, and you can set them according to the actual situation.

Question 8: How to make an electronic seal? Is there any related software? Online generation software is not reliable. It is made of photoshop, which is convenient and quick. Save as a template for later modification. Please send a private message if necessary.

Question 9: How to make an electronic official seal under the menu of "Comment-Annotation Tool-Stamp-Create Custom Stamp"

Question 10: How to make an electronic official seal? Make an electronic official seal where it needs to be stamped.