In those parts of the hotel room, which items are the easiest to install cameras?

Turn off the lights at night, and then carefully check whether there is light, usually a little red light. You can turn off the power in the room, and then check the hidden places, especially to see if there is anything that glows red in the furnishings facing the bed. Generally, if the camera works, there will be infrared light. Remember to check the bathroom and shower room. The following methods are for reference only and are relatively simple so far. First, turn off the power. Because pinhole cameras consume a lot of electricity, thieves may use the power supply in the room. We can turn off the main power supply in the room, so the pinhole camera can't work normally. Second, reduce the illumination. Turn off the lights in the room, and the illumination will be reduced. Ordinary wireless pinhole cameras (except for low-light infrared cameras) can't take a clear picture. This is one of the easiest ways. Three, to avoid unknown people in and out of the bath should pay attention to whether the doors and windows are closed, in and out of public places, such as staying in hotels, going to public dressing rooms or going to public toilets. , should first pay attention to check whether there are suspicious people or inappropriate items around. Fourth, use professional equipment to buy better detectors, so as to detect pinholes or eavesdropping equipment at any time and take precautions. Accommodation in hotels, guest houses, etc. Because hotels and other facilities are complete, there are many places where pinhole cameras can be installed, including air conditioners, lampshades, ceilings, cosmetic mirrors, smoke sensors, vases, sockets and TV cabinets. And pay special attention to the equipment and furnishings facing the bed.