How to prepare alcohol-based fuel

Ferrocene, potassium permanganate and acetone can increase the temperature and calorific value, but they all precipitate and the cost is too high.

The new additive developed by our company does not contain any of the above things. 99.99 The card number of refined methanol itself is 4800.

Additives can reach 5800 calories in the future. The temperature is 1 120 degrees, and the temperature of methanol itself is 900 degrees, which can be increased by more than 200 degrees.

I hope you don't believe any company's nonsense. This is the result of laboratory test. Some people say that it can reach 8000 calories after adding his additives.

Do you think it's possible? The effect can be doubled by adding only one additive. If you add all ferrocene and potassium permanganate,

Acetone can achieve the effect of diesel oil 10000 kcal. But your costs have gone up,

Ferrocene, potassium permanganate and acetone can increase the temperature and calorific value, but they all precipitate and the cost is too high. In fact, it is more cost-effective to buy additives and alcohol-based fuels yourself. Many chemical products can't be bought if you want. Some are extremely expensive to buy in small quantities, and the effect of their own preparation is not good. It is better to buy additives directly. The following are some functions of additives and how to prepare them. Additive 12/ kg. Add 5 Jin to a meal. Main business; 1 alcohol-based fuel additive,

2 methanol heating stabilizer

3 environmental protection oil heating stabilizer

4 Bio-alcohol Oil Emulsifier

5 methanol heating stabilizer

6 Bio-alcohol oil additive 3.5 yuan, available in the market 17— 18 yuan, heating stabilizer 3.5 yuan, available in 20 yuan, I only sell 3.5 yuan here.

Alcohol based fuel additive. The latest model per kilogram 12 yuan. Better than ordinary additives. I also have this old one, but we don't promote it.

Now it is the second generation additive. So hard that you don't want to know. Functional components of alcohol-based fuel heat stabilizer;

1, increasing the calorific value of alcohol-based fuel, and adding 0.3%-0.5% to the existing alcohol-based fuel can greatly increase the calorific value of alcohol-based fuel;

Adding 0.3%-0.5% ethanol into methanol, then adding a certain proportion of water, and fully stirring to obtain alcohol-based fuel with high calorific value.

It can be widely used for burning oil in factories, school canteens, hotels, boilers, etc.

2, reducing the activity of methanol molecules,

Increase that stability of methanol and reduce volatilization. We all know that methanol is a flammable liquid, which is very volatile.

At about 64 degrees Celsius, it can change from liquid to flammable methanol vapor. If not controlled, it is very dangerous.

It is also easy to waste. One of the functions of alcohol-based fuel heat stabilizer is to reduce the molecular activity of methanol.

Increase that stability of methanol, reduces volatilization, and is more stable and safe in the proces of production, transportation and storage.

At the same time, the consumption in the combustion process is greatly reduced, which is also the reason why the combustion time of alcohol-based fuels on the market is longer than that of alcohol-based fuels.

3. Change the traditional discharge mode, and change the waste gas into soluble solids and discharge them into the furnace.

Any fuel combustion will produce harmful gases such as sulfur dioxide, carbon monoxide and methanol, especially primary alcohol and waste alcohol.

The recovered methanol contains a lot of chemical raw materials harmful to human body or environment. If discharged in the form of gas, it will cause harm to human body.

Very bad for the environment. Alcohol-based fuel heat stabilizer is to turn harmful components in waste gas into soluble solids and discharge them out of the furnace.

When the furnace is used during the day, the temperature can reach several hundred degrees, but when the temperature drops to room temperature at night, a large amount of water vapor will be formed in the furnace.

The generated soluble solids will be dissolved in water vapor and absorbed by the dry environment in the furnace.

This is why there will be a little white material in the furnace after use, and the white material will disappear the next day, and there will be water droplets on the inner wall of the furnace core.

4, can fully decompose methanol molecules, decompose water molecules, and make them fully burn. The heat of combustion of methanol is about 5300 kcal,

Can't reach the temperature and heat required for cooking. We need to add high calorific value accessories to solve this problem, but the price of high calorific value accessories is quite high.

For example, the chemical calorific value of acetone or other ethers is quite high, but the price is around 15000/ ton.

I'm afraid the price of alcohol-based fuel produced by this method is similar to that of diesel oil, which can't achieve the purpose of saving money and is quite difficult to popularize.

So we can only solve the problem from the source of fuel. Alcohol-based fuel heating stabilizer can decompose oxygen molecules in methanol.

Methanol is fully combusted in oxygen-enriched environment, and at the same time, alcohol-based fuel heat stabilizer can decompose water in methanol into hydrogen and oxygen.

Make it burn more fully and completely, so as to improve the calorific value and firepower of fuel. This is also what we see when we add a little alcohol-based fuel heating stabilizer to methanol or alcohol-based fuel on the market.

The color of the fire immediately turned into red diesel, and the flame was higher than 1/3, and the burning time was longer.

Application of alcohol-based fuel heat stabilizer: With alcohol-based fuel heat stabilizer, it is simple to produce alcohol-based fuel.

Add a certain amount of water and heat stabilizer into methanol and stir for a few minutes.

Now take 99.9% methanol to produce 80% alcohol fuel as an example, and the formula is as follows:

800 kg of methanol, 0/90 kg of water195 kg of alcohol-based fuel heating stabilizer 5kg- 10kg.

. Process flow: 1. Adding water into methanol, and stirring to form a mixed solution of water and methanol.

2. Add the above amount of alcohol-based fuel heating stabilizer into the mixed solution of water and methanol, and stir for 10- 15 minutes.

Step 3 fill. Welcome to call! Guangzhou gaowang gas appliance co., ltd. address: building 1 1, Fuyi road, shiji town, Panyu district, Guangzhou.

Tel:139 28 795 078 qq79811735.