Difference between overlord lock body and standard lock body

The difference between the overlord lock body and the standard lock body is mainly that their lock edges are different, the anti-lock is different and the universality is different.

First, the door lock is different.

1. Overlord lock body: the length of the lock edge of Overlord lock body is about 388mm.

2. Ordinary lock body: The length of door lock side bar of ordinary lock body is usually about 240mm.

Second, the lock is different.

1. Overlord lock body: Compared with ordinary lock body, Overlord lock body has two locking tongues, called dumb tongues, which are mainly used for locking.

2. Ordinary lock body: Ordinary lock body has no additional locking tongue for locking.

Third, universality is different.

1, Overlord lock body: Overlord lock body is worse than ordinary lock body in universality. Most smart lock manufacturers need to pay extra to adapt to the overlord lock body, and some smart lock manufacturers even do not support the overlord lock body for some reasons.

2. Ordinary lock body: Ordinary lock body is superior to Wang Ba lock body in universality, which is supported by most smart lock manufacturers, and no adaptation fee is required.

Overlord lock body is safer;

The overlord lock body will definitely be safer than the ordinary standard lock body, because this lock body has added two locking tongues called dumb tongues on the original basis, so the anti-locking function of the overlord lock body has been strengthened. Moreover, the structure of this lock body is complicated, and it is very difficult to pry open this overlord lock body. However, this overlord lock body also has some shortcomings, because it does not match the smart lock. If you want to install a smart lock on the overlord lock body, you need to add an extra installation fee, and this lock body is difficult to replace. Only professional lock repairers can replace the overlord lock body.