Will the hotel smoke alarm flash red?

Under normal circumstances, the smoke detector will carry out self-inspection, flashing once every tens of seconds, and the red light will flash frequently or normally when giving an alarm. In addition, it should be noted that the independent smoke sensor battery will also flash red when the power is insufficient.

When the smoke alarm is working normally, most brands of smoke detectors have flashing lights, which means that the controller is patrolling the detector to check its working status.

If the alarm status indicator lights up, it will always light up. The function of smoke alarm is to prevent fire. When it detects that the gas concentration in the car exceeds the standard, it will trigger the smoke detector, and there will always be stroboscopic or red light. At this time, it is necessary to check the causes in time, troubleshoot and avoid accidents such as fires.

The red light of the smoke alarm keeps flashing;

1. In the case of smog at home, it may be caused by the equipment not being reset. At this time, you need to reset the host or wait for about 30 minutes to recover.

2. It may be caused by too much dust or too serious pollution inside the detector. At this time, you only need to clean and maintain the detector in time to return to normal.

3. It may be that the filter screen on the smoke sense is too dirty to disperse the smoke. At this time, just clean the filter screen on the smoke sense.

4. It may be caused by smoke and water and internal circuit failure. At this time, it is necessary to remove the cigarettes and take them to the after-sales repair shop for repair or replacement.

5. It may be caused by the wrong adjustment of smoke sensation. At this time, it is good to readjust the sense of smoke.