Cleaning method of stainless steel water heater in hotel

Hotel stainless steel water heater is one of the important equipment for hotel to provide hot water. Cleaning the stainless steel water heater regularly can avoid the accumulation of dust, dirt and other substances in the water heater, prolong the service life of the water heater and ensure the quality of hot water. The following is the cleaning method of hotel stainless steel water heater.

1. Turn off the power supply and water inlet valve of the water heater and drain all the hot water in the water heater.

2. Mix the cleaning agent or cleaning agent with water, then roll it onto the inner wall of the water heater and the inner wall of the heat exchanger with a brush, and wait for 15 minutes.

3. Wash off the scale and dirt after brushing your teeth. Remember, you must pay attention to safety when cleaning with high-pressure water gun or electric tools.

4. Rinse with clear water again and drain all the water. This step should be repeated to ensure thorough cleaning.

5. Open the repeated circulation system, add coagulant into the water heater, and after the coagulant (which usually needs to be circulated in the water heater for about 30 minutes) acts in the water heater for a suitable time, discharge the coagulant.

6. Rinse with clean water, and thoroughly clean and maintain the inside and outside of the water heater.

In a word, it is very necessary to clean and maintain the stainless steel water heater regularly, which can not only ensure the normal operation of the water heater, but also avoid the health hazards caused by corrosion and scale accumulation in the water heater and ensure the comfort and health of hotel customers.