Configuration of induction door

According to the installation environment and requirements of the induction door, consider choosing the configuration of the induction door.

1) sensor selection: in high-end hotels and office buildings, you can choose high-sensitivity sensors; Choose Weibo sensor in narrow areas where people often pass by, such as banks and shops (the sensor can be adjusted).

2) Safety auxiliary device: In high-end hotels and other places, it is necessary to prevent hand-pinching events, and you can choose to install anti-pinch infrared sensors.

3) Equipped with standby power supply: In order to ensure that the automatic door can work normally in case of power failure, it can be equipped with standby power supply.

Main performance of translation induction door

There are many kinds in automatic induction door. Firstly, the translation induction gate group consists of the following parts:

1. main controller: it is the command center of the automatic door, and sends out corresponding instructions through a large-scale integrated block with instruction program to command the motor or electric lock system to work; At the same time, people adjust the opening speed, opening range and other parameters of the door leaf through the main controller.

2. Induction detector: responsible for collecting external signals, just like human eyes. When the moving object enters its working range, a pulse signal is given to the main controller;

3. Power motor: provides the main power for opening and closing the door and controls the acceleration and deceleration of the door leaf.

4. Door leaf moving track: Just like the railway track of a train, the expander wheel system of the door leaf is restricted to move in a specific direction.

5. Gear train of door leaf spreader: used to hang movable door leaves and drive them to run under power traction.

6. Synchronous belt (some manufacturers use V belt): a gear train used to transmit the power generated by the motor and pull the door leaf spreader.

7. Lower guide system: it is the guide and positioning device at the lower part of the door leaf to prevent the door leaf from swinging back and forth during operation.

When the door leaf is to be opened and closed at the same time, its working process is as follows:

When the induction detector detects someone entering, it sends a pulse signal to the main controller, and the main controller informs the motor to run after judgment, and at the same time monitors the number of revolutions of the motor to inform the motor to apply force at a certain time and enter a slow running. After the motor gets a certain running current, it runs forward to transmit power to the synchronous belt, and then the synchronous belt transmits power to the spreader system to open the door leaf; After the door leaf is opened, the controller will make a judgment. If it is necessary to close the door, the motor will be informed to move in the opposite direction to close the door leaf.

Main performance of flat open induction door

1. Convenient installation: it is not affected by the original structure of the doorpost and gate, and any transverse door can be easily installed without destroying its original structure; There are no special requirements for the shape and size of the doorpost and the door body;

2, the effective thrust is large: when opening the door, the door opener works at the best stress point (farthest from the hinge), and the efficiency is 100%. As long as it can be pushed by a single person, it can work reliably;

3. The stress on the door body is small: because the stress point is the best and the efficiency is the highest, the stress point on the door body is the smallest and the door body structure will not be deformed;

4, can open the ultra-wide door: because it works farthest from the door pivot, and the direction of stress is always consistent with the direction of opening the door, no matter how wide the door is, it can be easily opened and closed;

5. The gate can be opened and closed freely at 0 ~ 360 degrees, with super wide angle;

6. Self-locking: after the gate is closed, the door opener can be locked reliably by itself without adding an electric lock;

7. High intelligence: Because this machine has its own interlocking electric lock, it can freely set the opening sequence of the left and right doors, arbitrarily designate one door to open, stop automatically in case of obstruction and jam, and automatically determine that the car or person will automatically close after leaving, and has a value-added interface, which forms a modern intelligent access control system with ground sensors and card readers/ciphers;

8. Power saving: Because the door opening efficiency is high and the required power is small, the power consumption is extremely low;

9, limit switch, easy to control, accurate and stable limit, will not overload the motor and mechanism;

10, with small stress on the mechanism and long service life;

1 1, streamlined appearance, compact and beautiful.

New technology intelligent induction door opens and closes the door according to human body shape.

With the development of science and technology, ordinary automatic door induction door is not uncommon. Have you ever heard of an intelligent automatic door that can automatically open and close the door according to the shape of the human body? There is an intelligent automatic door, which can determine how big the door needs to be opened according to different physical characteristics of different people. This smart door is equipped with a large number of infrared sensors. When people need to pass through this door, the horizontal bar (controlled by computer) that makes up the door leaf will be opened accurately according to the parameters of people's head, shoulders, body, feet, hands and luggage, plus the remaining 5 cm to 15 cm activity space. People who go in and out of this door will not encounter difficulties if they are in wheelchairs or bring pets, cats and dogs. According to the developers of smart doors, the development of such smart doors can reduce the entry or loss of cold and hot air, which is very beneficial to reducing the cost of heating or cooling equipment. This smart door can also identify the identity of frequent customers and prevent others from entering casually, which also increases the security of the office or home.