Beijing Kangle Architectural Decoration Tianjin Soft Furnishings Decorative Floor Decoration Roller Blinds Installation Steps

Step 1: Install the roller blind accessories to determine the left and right directions of the making head and the vertical direction of the beads. The left and right sides of the making head are interchangeable, and the making head can be installed according to the owner's preference or the convenience of home placement.

The bead-drawing head can be rotated and can be used for lifting after side loading and top loading respectively.

Step 2: Install the system head. There are two methods for installing the system head, corresponding to the two installation solutions.

First type: Exterior decoration: Compare the finished product with the window. After finding the suitable position, mark the position of the screws on the window frame or wall, and use the screws to tighten the left and right screws on the window frame or wall. , and open the rotatable module on the bead-free control head.

Second type: Internal installation: Place the finished roller blind in the window frame. After finding a suitable position, mark the position of the screws on the top of the window frame, and use screws to lock the left and right screws on the window. The top of the frame, and lift up the rotatable module on the head without drawing beads.

Step 3: Install the track 1. First insert the right end of the upper rail into the bead-bearing head, and then insert the left end of the upper rail into the bead-free bead.

2. Buckle the opened rotatable module and confirm that the roller blind will not fall or move easily, then the installation is complete.

3. Gently pull down the bead curtain on the front side, and the roller blind will automatically rise.

4. Pull down the bead curtain on the rear side to control the descent of the roller blind.