Hotel sheet cleaning

1, for personal use: wash the emulsifier with a small amount of linen and add water directly.

2. Production of liquid linen detergent: linen detergent emulsifier+water+essence+pigment+preservative.

3. Production of pasty linen detergent: linen washing emulsifier+four-in-one thickener+water+essence+pigment+preservative+salt.

4. Production of powdered linen detergent: linen detergent emulsifier+basic powder (soda ash, sodium silicate, etc. )

Linen washing emulsifier is a super emulsifier specially developed by Chengdu Hengfeng Hongye Detergent Factory, which has the following characteristics:

First, the super five functions

1, which has super cleaning function for old dirt, old sludge, old stains, old stains, tea stains, sweat stains, fine spots, blood stains and domestic stains.

2. It has super cleaning function for peanut oil, rapeseed oil, salad oil, corn oil, butter, sheep oil, lard, camellia oil, palm oil, mixed oil, organic oil, edible oil, animal oil and vegetable oil.

3. Used for industrial oil, mineral oil, inorganic oil, petroleum, petroleum fittings, lubricating oil, mechanical oil, clutch oil, gear oil, engine oil, ink, demoulding oil, compressor oil, refrigeration oil, vacuum pump oil, internal combustion engine oil, diesel engine oil, gasoline engine oil, marine oil, bearing oil, guide rail oil, hydraulic transmission oil, metalworking oil, electric tool oil, etc.

4. Excellent cleaning function for essential oil, methyl silicone oil, ethyl silicone oil, phenyl silicone oil, methyl hydrogen silicone oil, methyl phenyl silicone oil, methyl chlorophenyl silicone oil, methyl ethoxysilicone oil, methyl trifluoropropyl silicone oil, methyl vinyl silicone oil, methyl hydroxy silicone oil, ethyl hydrogen silicone oil, hydroxyl hydrogen silicone oil, cyanosilicone oil, damping silicone oil, diffusion pump silicone oil, hydraulic oil, insulating oil, heat conduction oil and brake oil.

5. It has super cleaning function for the handwriting of colored pens such as ballpoint pens, oil-based pens and gel pens.

6. Alkalinity, acid and alkali resistance, hard water resistance and low foam.

Second, the scope of application

1, used for cleaning hotel tablecloths, napkins, quilt covers, quilt cores, bed sheets, pillowcases, bed skirts, chair covers, shower curtains, bed end mats, protective mats, and towels such as square towels, bath towels, floor towels and bathrobes.

2, used for cleaning work clothes, chef clothes, machine repair clothes, work clothes and other professional clothing.

3, used to clean down jackets and other heavy oily clothes.

4, used for cleaning textiles, cloth and other fabrics.

Third, the production formula and production process

1) Personal use:

Wash the emulsifier with a small amount of linen and use it directly with water. Adjust the dosage according to your own situation.

2) Production of liquid linen detergent:

1, formula: linen washing emulsifier+water+essence+pigment+preservative.

1), linen washing emulsifier 1- 15%

2), water 90-99%

3) Appropriate amount of essence, pigment and preservative.

2. Production technology: add linen washing emulsifier, essence, pigment and preservative into water, stir and dissolve, and defoam.

3) Production of pasty linen detergent:

1, formula: linen washing emulsifier+four-in-one thickener+water+essence+pigment+preservative+salt.

1), linen washing emulsifier 1- 10%

2), water 84-97%

3) Appropriate amount of essence, pigment and preservative.

4), 4-in-1 thickener 2-6%, depending on the required consistency to quantify, the higher the consistency, the greater the dosage.

2. Production technology: add the flax water-washing emulsifier, four-in-one thickener, essence, pigment and preservative into water, stir and dissolve, and then see if the consistency meets the requirements. You can try to adjust the consistency with salt and finally defoam.

3. How to adjust the proportion of salt?

1), initial salt ratio: First do a small test of one kilogram of product, the method is: pinch a little salt with your fingers (don't use a spoon), put a little less, put it once and stir it to dissolve, then put it again. When the consistency is generated, putting salt three times in a row can't improve the consistency, which shows that the salt ratio is enough. Salt should be measured first, and the proportion of salt used in one kilogram of products should be determined, and then the proportion needed for production should be enlarged.

2) Determine the proportion of salt: If the proportion of salt used in one kilogram of product is enlarged to the proportion required for production, there will be certain measurement error and it needs to be readjusted. Adjustment method: Knock out one kilogram of the prepared washing liquid and adjust the proportion of salt to the thickest state, then you can know the final proportion of salt.

3) Adjusting the proportion of salt: changing the variety of salt (edible salt, industrial salt, brine and raw salt), changing the weight of water, adjusting the formula, adjusting the cost and adjusting the raw materials involves one of these situations. Note: too much salt will turn into water, and the aqueous solution will turn white.

4) Beginners do experiments. First, do a small experiment of one kilogram of products. After all the raw materials are dissolved, divide them into ten parts to adjust the salt, and find a way first.

4) Production of powdered linen detergent:

1, formula: linen washing emulsifier+basic powder (soda ash, sodium silicate, etc. )

1), linen washing emulsifier 2- 15%

2) 85-98% of basic powder

2. Production process: adding linen washing emulsifier into basic powder (soda ash, sodium silicate, etc.). ) and stir well.

Fourth, the use of preservatives guidance.

1, factors affecting shelf life: preservatives play a role in quality assurance, that is, keep the product from deteriorating. There are many reasons for deterioration, such as the cleanliness of water, bacterial infection of processing equipment, accelerated bacterial reproduction in hot weather, residual bacteria on packaging and so on.

2. Dosage of preservatives: There are many kinds of preservatives, depending on the content and quality effect, and how much can be sent to achieve the quality guarantee effect. If you put more, the cost will increase, and if you put less, the shelf life will be short. The amount of preservatives should be determined according to the requirements of their shelf life. Taking Song Kai preservative stock solution (10% content) as an example, the reference ratio in two months is: 20g in summer 100kg of water, 20g in spring and autumn10g in winter. If the demand is guaranteed for a long time, it is necessary to combine various factors to set the proportion, and there is no unified standard.

3. It is suggested to install purple light in the production workshop for sterilization.

4. When producing alkaline products, preservatives should be added to water first, and then other raw materials should be added.