Traditional Culture Encyclopedia - Hotel reservation - Why can I plug in the network cable directly in the hotel without pressing the regulator?

Why can I plug in the network cable directly in the hotel without pressing the regulator?

The hotel's local area network is a large number of D-link settings, which can be plugged in and connected to two computers at home. Just use the small one. Let me ask you first, what network telecommunications do you have? If it is telecommunications, IP is not needed. If you still don't understand, you can call your cable company. Generally speaking, when a router or a three-layer switch is initially set up, it is impossible to log in through the LAN, because the local IP address of the router has not been set.

Usually, a data cable (serial port at one end and RJ45 at the other end) is used to connect the serial port of the computer and the console port of the router respectively, and it is set after logging in with the HyperTerminal. You can log in from the LAN only after the local IP settings take effect.

You'd better read your instructions.

-

Oh, it's a home model ~ set up your computer first, and look below.

Configure the IP address of the connected computer to the IP address of the same network segment as the DI-540 broadband router. For example: IP: 192. 168.0.3, mask: 255.255.0, gateway (router default management IP):192.168.0.1 After these preparations and configurations are completed, you can officially visit the DI-504 broadband router and further set it up.

Start the browser, enter: http:/192.168.12.88 in the address bar. After the connection is established, the login window will pop up, enter the administrator user name: admin and password: (empty, remember to set it after setting), and click "OK" to enter the management interface. The basic settings are as follows.