Failure and maintenance of carpet machine

According to Baidu Aigou. com, the common faults of carpet machines are as follows:

1. The machine cannot be started;

2. Poor water absorption.

3. Insufficient water flow.

Maintenance method of carpet cleaning machine;

1. Maintenance of motor: motor is an important part of carpet cleaning machine. If the motor fails to start, it needs to be disassembled and repaired. In general, the cause of motor failure may be loose wires, serious motor wear or bearing stuck, and the specific treatment method needs to be determined according to the actual situation.

2. Suction and washing: If the suction port of the carpet cleaning machine is blocked, the machine can be disassembled, and the filter or suction pipe at the suction port can be cleaned to restore the water absorption capacity.

3. Replace the valve of the water inlet pipe: When there is a problem with the valve at the water inlet pipe, resulting in poor water flow of the carpet washer, it is necessary to remove the valve at the water inlet pipe for replacement. Pay attention to the selection of parts of the same model and specification when replacing.

4. Maintenance of the water pump: When the water pump of the carpet cleaning machine fails, it is necessary to check whether the water pump is blocked or worn. If it is blocked, you can clean the water pump. If the wear is serious, the water pump needs to be replaced.