Where is the largest clothing wholesale market in Liusha, Puning?

1. Replace with new spark plugs regularly

Using new spark plugs can save fuel 3. Make sure the spark plug model is correct and the ignition gap is appropriate. Check whether the spark plug wire is cracked or burned, and whether the insulation is broken. Cracked high-voltage wires will increase fuel consumption because they cannot conduct sufficient voltage to the spark plug. Make sure the ignition timing is adjusted according to the instructions. If the car does not use an electronic ignition system, check and maintain the contacts, ignition head and distributor cover of the distributor according to the instructions.

2. Replace the air filter regularly

A dirty air filter will enrich the air-gasoline mixture and increase fuel consumption10. Replace the fuel filter according to the instructions. Make sure the idle speed and carburetor mixture are adjusted correctly according to the instructions. Use oil of specified viscosity to reduce friction. Use rear axle and transmission lubricant of specified viscosity. dao

3. Inspect the cooling system on schedule

Check whether the water tank cover has cracks and whether the gasket is damaged. If the water tank cover is not tightly closed, the cooling system will not work properly. Confirm whether the thermostat is working properly. If the thermostat is sluggish and does not open for an extended period of time, it will also delay the engine warming up. The fuel consumption of a cold engine is equal to twice that of a warm engine.

4. Confirm that the tire pressure is normal

Under-inflated tires increase fuel consumption. Inflating with slightly higher pressure can save fuel, but it should not exceed the standard maximum pressure value on the side of the tire. Confirm that the drive belt is normal (especially the fan belt) and adjust it appropriately. Make sure the battery is fully charged and easy to start. Make sure all tires are properly balanced. Make sure the front wheel is correctly aligned.

1. Replace with new spark plugs regularly

Using new spark plugs can save fuel3. Make sure the spark plug model is correct and the firing gap is appropriate. Check whether the spark plug wire is cracked or burned, and whether the insulation is broken. Cracked high-voltage wires will increase fuel consumption because they cannot conduct sufficient voltage to the spark plug. Make sure the ignition timing is adjusted according to the instructions. If the car does not use an electronic ignition system, check and maintain the contacts, ignition head and distributor cover of the distributor according to the instructions.

2. Replace the air filter regularly

A dirty air filter will enrich the air-gasoline mixture and increase fuel consumption10. Replace the fuel filter according to the instructions. Make sure the idle speed and carburetor mixture are adjusted correctly according to the instructions. Use oil of specified viscosity to reduce friction. Use rear axle and transmission lubricant of specified viscosity.

3. Inspect the cooling system on schedule

Check whether the water tank cover has cracks and whether the gasket is damaged. If the water tank cover is not tightly closed, the cooling system will not work properly. Confirm whether the thermostat is working properly. If the thermostat is sluggish and does not open for an extended period of time, it will also delay the engine warming up. The fuel consumption of a cold engine is equal to twice that of a warm engine.

4. Confirm that the tire pressure is normal

Under-inflated tires increase fuel consumption. Inflating with slightly higher pressure can save fuel, but it should not exceed the standard maximum pressure value on the side of the tire. Confirm that the drive belt is normal (especially the fan belt) and adjust it appropriately. Make sure the battery is fully charged and easy to start. Make sure all tires are properly balanced. Make sure the front wheel is correctly aligned.

1. Replace with new spark plugs regularly

Using new spark plugs can save fuel3. Make sure the spark plug model is correct and the firing gap is appropriate. Check whether the spark plug wire is cracked or burned, and whether the insulation is broken. Cracked high-voltage wires will increase fuel consumption because they cannot conduct sufficient voltage to the spark plug. Make sure the ignition timing is adjusted according to the instructions. If the car does not use an electronic ignition system, check and maintain the contacts, ignition head and distributor cover of the distributor according to the instructions.

2. Replace the air filter regularly

A dirty air filter will enrich the air-gasoline mixture and increase fuel consumption10. Replace the fuel filter according to the instructions. Make sure the idle speed and carburetor mixture are adjusted correctly according to the instructions.

Use oil of specified viscosity to reduce friction. Use rear axle and transmission lubricant of specified viscosity.

3. Inspect the cooling system on schedule

Check whether the water tank cover has cracks and whether the gasket is damaged. If the water tank cover is not tightly closed, the cooling system will not work properly. Confirm whether the thermostat is working properly. If the thermostat is sluggish and does not open for an extended period of time, it will also delay the engine warming up. The fuel consumption of a cold engine is equal to twice that of a warm engine.

4. Confirm that the tire pressure is normal

Under-inflated tires increase fuel consumption. Inflating with slightly higher pressure can save fuel, but it should not exceed the standard maximum pressure value on the side of the tire. Confirm that the drive belt is normal (especially the fan belt) and adjust it appropriately. Make sure the battery is fully charged and easy to start. Make sure all tires are properly balanced. Make sure the front wheel is correctly aligned.

1. Replace with new spark plugs regularly

Using new spark plugs can save fuel3. Make sure the spark plug model is correct and the firing gap is appropriate. Check whether the spark plug wire is cracked or burned, and whether the insulation is broken. Cracked high-voltage wires will increase fuel consumption because they cannot conduct sufficient voltage to the spark plug. Make sure the ignition timing is adjusted according to the instructions. If the car does not use an electronic ignition system, check and maintain the contacts, ignition head and distributor cover of the distributor according to the instructions.

2. Replace the air filter regularly

A dirty air filter will enrich the air-gasoline mixture and increase fuel consumption10. Replace the fuel filter according to the instructions. Make sure the idle speed and carburetor mixture are adjusted correctly according to the instructions. Use oil of specified viscosity to reduce friction. Use rear axle and transmission lubricant of specified viscosity.

3. Inspect the cooling system on schedule

Check whether the water tank cover has cracks and whether the gasket is damaged. If the water tank cover is not tightly closed, the cooling system will not work properly. Confirm whether the thermostat is working properly. If the thermostat is sluggish and does not open for an extended period of time, it will also delay the engine warming up. The fuel consumption of a cold engine is equal to twice that of a warm engine.

4. Confirm that the tire pressure is normal

Under-inflated tires increase fuel consumption. Inflating with slightly higher pressure can save fuel, but it should not exceed the standard maximum pressure value on the side of the tire. Confirm that the drive belt is normal (especially the fan belt) and adjust it appropriately. Make sure the battery is fully charged and easy to start. Make sure all tires are properly balanced. Make sure the front wheel is correctly aligned.

1. Replace with new spark plugs regularly

Using new spark plugs can save fuel3. Make sure the spark plug model is correct and the firing gap is appropriate. Check whether the spark plug wire is cracked or burned, and whether the insulation is broken. Cracked high-voltage wires will increase fuel consumption because they cannot conduct sufficient voltage to the spark plug. Make sure the ignition timing is adjusted according to the instructions. If the car does not use an electronic ignition system, check and maintain the contacts, ignition head and distributor cover of the distributor according to the instructions.

2. Replace the air filter regularly

A dirty air filter will enrich the air-gasoline mixture and increase fuel consumption10. Replace the fuel filter according to the instructions. Make sure the idle speed and carburetor mixture are adjusted correctly according to the instructions. Use oil of specified viscosity to reduce friction. Use rear axle and transmission lubricant of specified viscosity.

3. Inspect the cooling system on schedule

Check whether the water tank cover has cracks and whether the gasket is damaged. If the water tank cover is not tightly closed, the cooling system will not work properly. Confirm whether the thermostat is working properly. If the thermostat is sluggish and does not open for an extended period of time, it will also delay the engine warming up. The fuel consumption of a cold engine is equal to twice that of a warm engine.

4. Confirm that the tire pressure is normal

Under-inflated tires increase fuel consumption. Inflating with slightly higher pressure can save fuel, but it should not exceed the standard maximum pressure value on the side of the tire. Confirm that the drive belt is normal (especially the fan belt) and adjust it appropriately. Make sure the battery is fully charged and easy to start. Make sure all tires are properly balanced. Make sure the front wheel is correctly aligned.

1. Replace with new spark plugs regularly

Using new spark plugs can save fuel3. Make sure the spark plug model is correct and the firing gap is appropriate. Check whether the spark plug wire is cracked or burned, and whether the insulation is broken. Cracked high-voltage wires will increase fuel consumption because they cannot conduct sufficient voltage to the spark plug. Make sure the ignition timing is adjusted according to the instructions. If the car does not use an electronic ignition system, check and maintain the contacts, ignition head and distributor cover of the distributor according to the instructions.

2. Replace the air filter regularly

A dirty air filter will enrich the air-gasoline mixture and increase fuel consumption by 10%. Replace the fuel filter according to the instructions. Make sure the idle speed and carburetor mixture are adjusted correctly according to the instructions. Use oil of specified viscosity to reduce friction. Use rear axle and transmission lubricant of specified viscosity.

3. Inspect the cooling system on schedule

Check whether the water tank cover has cracks and whether the gasket is damaged. If the water tank cover is not tightly closed, the cooling system will not work properly. Confirm whether the thermostat is working properly. If the thermostat is sluggish and does not open for an extended period of time, it will also delay the engine warming up. The fuel consumption of a cold engine is equal to twice that of a warm engine.

4. Confirm that the tire pressure is normal

Under-inflated tires increase fuel consumption. Inflating with slightly higher pressure can save fuel, but it should not exceed the standard maximum pressure value on the side of the tire. Confirm that the drive belt is normal (especially the fan belt) and adjust it appropriately. Make sure the battery is fully charged and easy to start. Make sure all tires are properly balanced. Make sure the front wheel is correctly aligned.

1. Replace with new spark plugs regularly

Using new spark plugs can save fuel3. Make sure the spark plug model is correct and the firing gap is appropriate. Check whether the spark plug wire is cracked or burned, and whether the insulation is broken. Cracked high-voltage wires will increase fuel consumption because they cannot conduct sufficient voltage to the spark plug. Make sure the ignition timing is adjusted according to the instructions. If the car does not use an electronic ignition system, check and maintain the contacts, ignition head and distributor cover of the distributor according to the instructions.

2. Replace the air filter regularly

A dirty air filter will enrich the air-gasoline mixture and increase fuel consumption10. Replace the fuel filter according to the instructions. Make sure the idle speed and carburetor mixture are adjusted correctly according to the instructions. Use oil of specified viscosity to reduce friction. Use rear axle and transmission lubricant of specified viscosity.

3. Inspect the cooling system on schedule

Check whether the water tank cover has cracks and whether the gasket is damaged. If the water tank cover is not tightly closed, the cooling system will not work properly. Confirm whether the thermostat is working properly. If the thermostat is sluggish and does not open for an extended period of time, it will also delay the engine warming up. The fuel consumption of a cold engine is equal to twice that of a warm engine.

4. Confirm that the tire pressure is normal

Under-inflated tires increase fuel consumption. Inflating with slightly higher pressure can save fuel, but it should not exceed the standard maximum pressure value on the side of the tire. Confirm that the drive belt is normal (especially the fan belt) and adjust it appropriately. Make sure the battery is fully charged and easy to start. Make sure all tires are properly balanced. Make sure the front wheel is correctly aligned.

1. Replace with new spark plugs regularly

Using new spark plugs can save fuel3. Make sure the spark plug model is correct and the firing gap is appropriate. Check whether the spark plug wire is cracked or burned, and whether the insulation is broken. Cracked high-voltage wires will increase fuel consumption because they cannot conduct sufficient voltage to the spark plug. Make sure the ignition timing is adjusted according to the instructions. If the car does not use an electronic ignition system, check and maintain the contacts, ignition head and distributor cover of the distributor according to the instructions.

2. Replace the air filter regularly

A dirty air filter will enrich the air-gasoline mixture and increase fuel consumption10. Replace the fuel filter according to the instructions. Make sure the idle speed and carburetor mixture are adjusted correctly according to the instructions. Use oil of specified viscosity to reduce friction. Use rear axle and transmission lubricant of specified viscosity.

3. Inspect the cooling system on schedule

Check whether the water tank cover has cracks and whether the gasket is damaged. If the water tank cover is not tightly closed, the cooling system will not work properly. Confirm whether the thermostat is working properly. If the thermostat is sluggish and does not open for an extended period of time, it will also delay the engine warming up. The fuel consumption of a cold engine is equal to twice that of a warm engine.

4. Confirm that the tire pressure is normal

Under-inflated tires increase fuel consumption. Inflating with slightly higher pressure can save fuel, but it should not exceed the standard maximum pressure value on the side of the tire. Confirm that the drive belt is normal (especially the fan belt) and adjust it appropriately. Make sure the battery is fully charged and easy to start. Make sure all tires are properly balanced. Make sure the front wheel is correctly aligned.