What are the basic functional requirements of hotel design?

One. When customers need to enter the room in the corridor and room door, they should start from the room door. The corridor of the hotel should focus on the guest room door (purposeful lighting), and the steel door frame should be a good way, without deformation and impact resistance. In addition, the design of the room should focus on performance, which is related to the intercommunication of design languages such as indoor wooden furniture or color. If this is not possible, the width of the door leaf should be 880-900 mm.

The design of general hotel rooms in double-door porch area starts from the corridor at the entrance, and the wardrobe is on the other side behind the door. We suggest that, if possible, the wardrobe should be arranged on one side of the sleeping area, which will be very convenient for guests and solve the problems of narrow space in the door, too many accommodating functions and inconvenient use. Of course, porch wardrobes can also be made, especially in rooms with small space. Some economical rooms with less investment can even omit the wardrobe door. Only one use "cavity" is left, and luggage can be directly put in, which is convenient and economical. High-end business rooms, you can also add grooming and bring your own dining table in this area. The depth of the desktop is 30 cm. Guests can also put some odds and ends, which is a thoughtful functional design.

Third, the work area is centered on the desk. The decorative design of furniture will be the focus in this respect. The complete business function is shown here. Faxes, telephones, and various sockets should be placed neatly one by one, and messy wires should be stored clean. The location of the desk should also be carefully considered according to the space. Good lighting and lines are very important. You don't have to sit facing the wall like the old guest room.

4. Entertainment, Leisure and Conference Area From the point of view of guest rooms, I hope that guest rooms are private and completely random spaces. There are many inconveniences in bringing visiting guests into the room. From the hotel operator's point of view, it is definitely not as good as receiving guests in the hotel's business premises. The latter produces efficiency, so why not? This change has created space conditions for the improvement of rooms and the advancement to more comfortable and comfortable functions. Reading, listening to music and other functions can be added to the design, which changes the single situation that people can only lie in bed and watch electricity in the room.

Bedroom area This is a large area of the whole guest room. In order to meet the needs of different customers, it is recommended not to put a bedside table between two beds, or to put a simple desktop device that can be folded up when necessary. As for the centralized control panel, don't mention it again. It is the most outdated equipment in the guest room. The bedside table can be set on both sides of the bed, because its function is very simple, easy to use is the most important, and it must not be too complicated. The back screen and wall of the bed are relatively complete areas in the room, which can be described emphatically. However, attention should be paid to the area about 70cm above the bed surface, which is easy to get dirty, and antifouling materials should be considered. Dimmable seat lamp or desk lamp (wall lamp is better) is very important for shaping the light environment in sleeping area, and its frequency of use and damage rate are high, which can not be ignored.

Sixth, the independent wind, water and electricity system in the bathroom is more complicated. There are many equipments and small area, so we should follow the basic principles of ergonomics and do humanized design. In this regard, it is an international trend to distinguish between dry and wet areas and toilets, avoiding cross-functional and mutual interference. The appearance of some new technologies also provides new ideas for the control mode of room lighting, such as the fully remote control room lighting control system. When using electricity, an infrared remote controller the size of a remote controller can turn on and off the lights at will, even the switch panel is saved, and of course some wiring in the wall is saved.