Lijiang Apartment 1 Matters needing attention and decoration details in fine decoration

Rebuilding a new house is certainly a boring job. For some owners with better economic conditions, it is a good idea to buy hardcover houses. But this is not without problems. Be very careful when you receive the hardcover. Then let's learn about the matters needing attention and details of Lijiang apartment 1 fine decoration.

Thoughts on Fine Decoration of Lijiang Apartment 1 Phase

1, hidden works

Take cover engineering water conversion circuit, ceiling structure and toilet waterproofing in this project. Ceiling structure does not appear in the built-in drawings, but according to the regulations, structure, location, etc. , or the central vent, you can see from the side of the hardcover room that the steel keel of ceiling lighting is used for specific concealed works.

2, waterproof detection

It was not water that poured into the toilet, but the water meter with poor drainage on the ground was not washed away by water.

3, confirm the building materials

The keys used in the project should be clearly marked on the brand equipment, especially those with high gold content, such as sanitary ware, lamps and kitchen equipment. Brands should not only determine the type and source of equipment as much as possible.

Details of Fine Decoration of Lijiang Apartment 1 Phase

1, doors and windows

The top and bottom of the door will not be painted too much, and the door is sealed. The window should be elastic, and the outer window frame should have a protective cap.

2. Kitchen and bathroom

These two holes should be located under the ceiling with tile ceiling. The socket closest to the socket must be waterproof. Test whether the tap changer is fast enough, such as waterless, smooth, flexible and effective, and without drainage.

3. Pipeline

When wiping the bottom of the leaking pipe, transfer it to paper towels and water. The smoke outlet is located under the object. Check whether the smoke outlet is set for immediate inhalation. Then quickly respond to the peripheral fire object, immediately check whether the electromagnetic valve will prompt the air inlet to close, if not, repair it.