Furniture Installation Design of Zhonglihuang Hotel in Zhongtailong Sofa

1. Appearance quality The appearance quality of hotel furniture first requires the furniture to have a flat desktop, fine workmanship, exquisite decoration and clear and beautiful texture.

Guest room furniture is usually based on particleboard, medium density fiberboard, joinery board and laminated board, with veneer, veneer and plywood as covering materials.

Different substrate and cladding materials have different material properties. Failure to pay attention to material characteristics and correct use methods often leads to warping of plates.

The structural characteristics of the covering materials on the back and front of the plate must be the same or similar. Generally, the moisture content of the substrate is required to be 6~ 10%, and the materials selected should be the same batch as far as possible.

In the workshop, shorten the loading time as much as possible, and pay attention to the different coating thickness, pressing time and pressure due to different material characteristics and different moisture content of covering materials.

2. Structural strength Guest room furniture is mostly fixed furniture, and the general structure is mainly plate type. The connection methods are wood screws, hardware connectors and adhesives.

Pay attention to different material characteristics when using materials, such as particleboard, medium density board and other materials with poor nail holding power. Don't use it in places that need frequent activities or strong nail grip, such as door hinge screws, bottom rail screws and other places that are easy to loosen and produce noise.

Pay special attention to the hardware pendants on the bed screen and picture frame wall, and use wooden boards or boards instead of reinforcement. The 45-degree inverted wooden structure is popular now.

3. Transportation and installation Hotel floors are generally high, requiring light furniture for transportation.

In particular, some conjoined bed backs and some extended desks cannot be transported by elevators, and the freight elevators are generally dismantled when furniture is installed. How to transport them safely needs special consideration from the aspects of material weight and structure.

4. Under the condition that the material cost also meets the use requirements, use low-cost materials as far as possible, and pay attention to using the same small materials while using large pieces of surface materials, so as to comprehensively improve the utilization rate of plates.

Generally, there is a lot of guest room furniture. Try to arrange furniture reasonably by computer, comprehensively utilize large and small parts, and reduce material cost.

Different structures should pay attention to the comparison of material costs.