Usage of draft beer machine

All kinds of beer refrigeration equipment can be customized according to customer requirements, which is suitable for all large, medium and small occasions such as restaurants, restaurants, family banquets and bars at home and abroad.

Second, product advantages

1, the draft beer machine adopts high-quality stainless steel water tank and pipeline system to ensure pure and clear water quality and convenient maintenance.

2, beer machine built-in safety protection, low noise, power saving and durability.

The beer machine produced by our factory is simple in maintenance, convenient in operation, advanced in design and well-made. All plates, pipes, fittings and valves that come into contact with wort and beer have reached food-grade standards. Rubber parts such as stainless steel 304 and O-ring used in contact with beer have passed NSF certification, and the lubricating oil is Krupp lubricating oil imported from Germany.

4, the equipment processing is fine, and the welding (uniform) accuracy reaches the sanitary standard; The exterior is mirror polished.

5. It has a perfect CIP cleaning and disinfection system, and the equipment is convenient and thorough to clean.

6, the main equipment performance is stable, no leakage, no drip, no steam leakage.

7. The pipelines between equipments are connected by sanitary quick connectors, which is convenient for disassembly, assembly, movement and transformation.

Three. instructions

1, try to keep the box upright when handling, and the maximum inclination should not exceed.

2. The refrigerator should be placed in a cool and dry environment with no corrosive gas around. Remember to stay close to the heat source and avoid direct sunlight. The box should be placed above the wall 10cm to make the box stable, so as to avoid excessive vibration or noise.

3. The refrigerator shall not be turned on after 5 minutes of installation or shutdown, and shall not be turned on immediately after shutdown, and shall not be turned on within 30 minutes after handling and placing.

4. Note: Do not use sharp metal tools to remove ice.

When the ambient temperature is high, dew may appear outside the box, which is normal. Please wipe it off with a soft dry cloth in time.

6. Please clean the grease on the condenser and fan regularly to ensure energy saving and the best refrigeration effect.

7. The temperature in the cabinet is controlled by a thermostat, and users can adjust the temperature according to their own needs.

Four. Common faults and solutions of draft beer machine Possible causes of faults Inspection contents and solutions Remarks: The compressor does not work and the power supply voltage is low.

Burnout of compressor motor winding

Starter and protector burned out.

Compressor running parts are stuck.

The thermostat switch is not set to check the supply voltage.

Check the motor winding

tutamen

Check the compressor

Check whether the switch is equipped with a power regulator.

replace

replace

Replacement or maintenance

If the regulating switch machine fails, please ask professionals to repair the compressor without stopping the machine. The temperature in the box is not adjustable. The sensor and the temperature sensing assembly are not in correct contact. Re-fix and replace the original components of the sensor and temperature sensing assembly. The compressor starts and stops frequently, and the condenser does not rotate. The fan motor shaft leaks oil.

If the motor winding is burnt out, remove the motor, check and replace it, refuel and replace the short circuit of the compressor winding, check the compressor or replace the noisy refrigerator, which is uneven.

Loosen the nut nails of compressor, fan, condenser and other parts, readjust and tighten the screws and nuts.

1. If the machine is abnormal during operation, it is not allowed to disassemble the parts at will, and it must be checked and eliminated by professional technicians in time.

2. The repeated starting time of the compressor should be 5 minutes apart to avoid serious accidents caused by the compressor. 3. The heat dissipation of the unit is strong, and the surface area of the remaining fins in the stator is gray and greasy, so as to improve the refrigeration effect.

4. If the whole machine stops for a long time, cut off the power supply and keep the box clean and dry.