The car model is not attached properly. Can it be repaired?

In a week or two, the professional master can fix it. If it takes too long, my glue may have dried up and may not be repaired.

The steps of car film pasting are as follows:

1, before we film, we need to measure the size of our car glass, which is not small.

2. Next, the glass needs cleaning, and it must be cleaned with special car wash liquid. Be sure to ensure the cleanliness of the glass, and dry the residual moisture after cleaning, otherwise bubbles will easily appear.

3. Next, you can apply the film. First heat the car film, spray some water on the surface of the effective film, and then stick it from top to bottom. If the size is still too large, the extra film must be cut off.

4. Finally, after pasting, look for bubbles and scrape them off with a soft scraper. It doesn't matter if the bubbles can't be scraped off, as long as they are exposed to the sun for a few days, they will disappear.