How to modify the password of the door lock?

Password lock initialization can reset the password.

Generally speaking, there are three ways to modify the password of an electronic password door lock.

First, initialization, press a key for a few seconds from the inside and re-enter the password; Second, if it is the main lock, it can be modified from the computer of the switchboard; The third is to use the mechanical key matched with the phase lock to set the initialization password. Now, the first method to modify the password is introduced in detail.

1. Press the power button at the bottom of the outer panel once and the' *' button three times, and the buzzer will make a long sound.

2. Enter the old password, and then press "#" to confirm. The buzzer will sound for a long time and the LED will flash.

3. Enter the new password of 6 ~ 12 digits and press the' #' key to confirm, and the buzzer will give out a long sound.

4. Enter the same new password again and press "#" to confirm.

Note: During the setup process, if the input is wrong, the system will exit the setup program. If the input is correct, the buzzer will emit a long sound (or music sound) to indicate success, and the LED light will go out.