How to assemble the partition of public toilets more easily?

If the toilets in public places such as shopping malls and hotels are not equipped with partitions, the privacy of people who go to the toilets will not be protected, which will be embarrassing, so it is necessary to install partitions. However, for workers who have no assembly experience, how to assemble the partition of public toilets may become a difficult problem. So, how to assemble the partition of public toilets more easily? In fact, it is not difficult to assemble the partition of public toilets, which can be roughly divided into four steps: designing and drawing lines, installing corner codes, installing partitions and installing accessories.

First, design and draw lines Facing the problem of "how to assemble the partition of public toilets", the first thing to do is to design and draw lines. Because the area of each bathroom is different, the partition should be designed in detail before installation. According to the design drawings, clearly mark the installation positions of specific components such as angle code, foot seat and partition, so that the next specific assembly work is accurate.

Second, the installation of corner codes faces the problem of "how to assemble the partition of public toilets". The second thing to do is to install corner codes. Corner code is an important component connecting panels, doors and partitions, as well as walls and floors. During installation, drill holes with an electric drill, place the corner codes according to the marked positions, and then insert the expansion screws into the holes for fixation.

Third, the installation of partitions Faced with the problem of "how to assemble the partition of public toilets", it is necessary to reinstall the partition. The clapboards include middle clapboards, upright posts and door panels. , according to the installation order from one end to the other. In the process of assembly, cushion blocks are needed to assist assembly, so that all kinds of partitions are on the same horizontal plane, and there is no deviation from top to bottom. After installing the middle partition and the upright post, press the pressure bar first, and then install the door panel.

Four. Installing accessories The last step of toilet partition assembly is to install accessories. Accessories include handles, locks, clothes hooks, etc. The installation of accessories is relatively simple, but it should not be taken lightly. To prevent loose installation, falling off, scratches and other quality problems, affecting the use of the entire partition.

It is not difficult to assemble the partition of public toilets. As long as you follow the above steps, you will find the assembly process quite easy. After the overall assembly of the bathroom partition is completed, each partition should be inspected to see if there are scratches, cracks and other problems, and corresponding repairs should be made. After cleaning, it should wait for acceptance.