How to wire the bedside switch

We often put the switch beside the bed. It can be said that the bedside switch is one of the most common components in our daily life. However, the installation of the bedside switch is also learned, such as paying attention to the position and construction operation. So how to wire the bedside switch? Next, I will take you to solve this problem.

First, how to wire the bedside switch

It is easy to operate. The first step is to connect the neutral wire to the switch and the live wire to the lamp holder. Then turn on the other side of the switch and connect it with the other side of the lamp holder, so that the wire is connected. Attention, for our own safety, remember to cut off the power supply at the beginning of operation to prevent the danger of electric shock.

Second, how to install the socket of the bedside switch

1. First of all, we should design the width of the switch socket according to the width of our bed. Because the switch is installed at the bedside, it is necessary to design the corresponding width according to the size of the bed. Because there may be a bedside table at the bedside, the position of the socket should not be too high or it will be inconvenient to use. If it is too short, it will also cause the socket switch to be covered by the bedside table.

2. Operate according to the daily habits of the room owner. For example, some people like to use mobile phones and computers in bed. For this, it is best to install sockets on both sides, so that the mobile phone and computer can be used at the same time. Generally, one side of the bed should be equipped with a double control switch, so that we can also switch the bedroom lights on and off on the bed. Of course, it is also a good idea to install a data cable socket, which can facilitate us to charge our mobile phones.

3, pay attention to the installation process should be very careful, can't connect the zero line and live wire, otherwise it will lead to circuit damage. After the installation is completed, it is best to test whether it can be used normally.

Let me sum up: the above is the connection method of bedside switch. As can be seen from the above, although the operation is simple, the installation is more focused on testing our patience and care. Pay special attention to neutral wire and live wire. The size of the whole socket should be determined according to the size of your bed. As for the distribution of switch sockets, it depends on the preferences of the owners.