How about a stainless steel screen?

Stainless steel screen is a popular indoor and outdoor decorative partition product in recent years, which is mainly customized and has European, Chinese, modern and classical styles. For families, stainless steel screens are rarely seen, and are mostly used for the decoration of high-end places such as hotels and clubs. What about the stainless steel screen? We will show you the stainless steel screen and its installation points and maintenance matters.

How about a stainless steel screen?

1, stainless steel wire mesh can be divided into two processing technologies: welding and laser engraving. The welding screen is mostly welded by stainless steel tube, the wire drawing surface is fully welded, and the mirror surface is spot welded. This is the best cost and effect. Because if the mirror is fully welded, the polishing cost will be twice as high as that of the wire drawing surface, and the mirror must be welded with a tube at least 1.5mm thick to make the welding place smooth. If the tube is too thin, it will polish up and down different concave and convex feelings, which will affect the final effect.

2. The laser engraving of stainless steel screen generally adopts industrial board. After surface treatment (such as wire drawing, mirror surface, random lines, etc.). ), paste the laser film paper, and then carry out laser cutting according to the design scheme. Generally, the laser cutting thickness of mirror stainless steel screen is not recommended to exceed 5mm, mainly because the cutting surface cannot be polished.

3. The surface treatment of stainless steel screen is very mature now, including vacuum plating (black gold, rose gold, titanium gold, champagne gold), water plating (generally the bronze color of laser hollowed-out board), nano-spraying (the bronze color of pipe welding), electrophoretic gold (the bright surface treatment of aluminum plate carving) and so on.

4. The styles of stainless steel screen are: luxury, modern simplicity, Chinese classical, new Chinese, European, Nordic and other styles.

5. Suitable for villas, luxury houses, star-rated hotels, high-end clubs, sales centers, outdoor places, etc. The use of stainless steel screen has become a common practice.

6. Application of stainless steel screen: it can be used for indoor and outdoor partitions, hall wall panels, ceilings, elevator car panels, building dresses, signboards, etc. , and mainly plays a decorative role, which is not only durable, beautiful and novel, but also has a strong sense of the times.

Second, the installation points of stainless steel filter screen:

1. Fixed-point positioning: First, measure the installation position of the screen, and find out the hole position corresponding to the antenna on the ceiling (there is a fixed antenna at one end of the screen). Punch holes with a drill bit and cut the antenna of the screen to a length of 1.5cm.

2. Screen positioning: Two people (the screen is heavy and needs two people to cooperate) insert the antenna of the screen obliquely into the hole, fix the top of the screen first, and then correct the bottom. And check whether the screen is offset.

3. Glue fixing: the screen, floor and wall are fixed with transparent glass glue, and the glue can be done in one go without interruption, otherwise the glue at the joint will affect the aesthetic feeling.

Three, stainless steel filter cleaning points

1, ordinary dirt cleaning

If only some dust and dirt are left on the surface of colored stainless steel screen, it can be scrubbed with warm water or soap weak lotion. Some products or some adhesive tapes are attached to their surfaces, and it is best to clean them with warm water and weak detergent. Generally speaking, it is best to scrub the bonded parts with alcohol or organic solvent to facilitate cleaning.

2, grease, fingerprint cleaning

If the surface is polluted by grease, oil stains, fingerprints and lubricating oil, it can be wiped clean with paper towels first, and then cleaned with neutral detergent or ammonia solution or special detergent. Family members can scrub with water such as detergent. Some stainless steel filters with substandard quality will rust under certain circumstances. At this time, it can be cleaned with 10% nitric acid or grinding detergent, and it can also be cleaned with special washing drugs.

3. Stubborn stains on the screen should not be wiped with steel balls or gauze, but with a clean soft cloth, and even less with degreasing oil, which will cause fading and traces.

4. Screen glass panel: it is easy to leave cloth scraps when wiping, which is extremely difficult to clean. You can wipe it with a soft cloth and then with an old newspaper to keep it as bright as new. You can also wipe it with a soft cloth to remove oil stains and avoid leaving cloth scraps.

Four, stainless steel filter maintenance matters needing attention

1. After fixing, you should not drag it casually, but disassemble it at will. Professionals should be invited to install it.

2, should not let direct sunlight, so as to avoid fabric fading, premature aging, coating off.

3. Beware of the collision of hard objects on the surface to avoid scratches and dents.

The above is a brief introduction to Bianxiao stainless steel screen. Although many people don't use stainless steel screens now, there is nothing wrong with knowing more about a decoration product. If you want to know more, it is recommended to go to the manufacturer.