What is the material of the wallboard?

Introduction Partition is a derivative of wall materials, which plays a role in wall decoration and protection. It is mostly used for high-grade decoration of villas, star-rated hotels, etc., and is generally installed on the walls of halls, lobbies, restaurants, corridors, staircases, etc., which make the walls look more layered. What are the advantages and disadvantages of wallboard? What material is good for wallboard? How to choose and install wallboard? Next, let's introduce the knowledge of wallboard.

What are the advantages and disadvantages of wallboard? What are the advantages and disadvantages of wallboard materials? Choose wallboard, install wallboard, clean and maintain wallboard, what brand is good? What is wallboard? 1? Also known as dado and wallboard, it is a decorative wall material, generally based on wood. Generally speaking, wallboard has the characteristics of light weight, fire prevention, moth prevention and simple construction. Its main function is obvious decorative effect and convenient maintenance, and it can bring the basic structure of wallboard indoors: top line, upper and lower wallboard, waist line and skirting line. Roman columns, carved boards, hollowed-out boards, wallpaper, soft bags, etc.

Height of clapboard: Half-height type, also called clapboard, generally 900mm, 1000mm,1200 mm.. Full height type, that is, how high the wall is, it is fully covered.

Combination form of wallboard: combination with wallpaper, soft bag, wine cabinet, bookcase, wardrobe, secret door, dumb mouth, background wall and stairs.

2 Advantages and disadvantages of wallboard Advantages of wallboard

Safe and practical: its wear resistance and damage resistance are far better than ordinary paint and wallpaper, and it is more suitable if there are children at home. There are always some areas with high probability of bumping, such as public areas or corridors. Wallboard can protect the wall well, and it is convenient to hang or paste decorative paintings and photos.

Beautifying effect: wallboard can well reflect the style characteristics of decoration, and the decoration effect is very good, making the space more beautiful.

Sound insulation: wallboard has the advantages of sound insulation, heat preservation and wall protection.

Multifunctional: the upper end of the partition is designed as a shelf or a wall mirror is installed at the upper end of the partition, which not only beautifies the space but also protects the wall, and adds more practical functions to the partition.

Disadvantages of wallboard

The price is more expensive, and the decoration is limited by space.

Where wallboard is used for decoration, the area should be slightly larger and the activity space should be sufficient, otherwise the decoration effect of wallboard will be counterproductive, resulting in a sense of space oppression. Therefore, at present, the use of wallboard in family decoration is generally more in large spaces, villas and duplex buildings, but less in small areas. When decorating, look at personal preferences and economic conditions, and look at the area and decoration style of the home.

3 partition material 1, wood grain partition: wood grain artificial board is a new decorative material with wood grain texture formed on the surface of particleboard, fiberboard, plywood and other substrates by sanding, polishing, scraping, oiling and printing wood grain.

2. FRP wallboard: It is made of glass fiber fabric as reinforcing material, unsaturated polyester resin as adhesive, and under the action of curing agent and catalyst. It has wear resistance, acid resistance and high temperature resistance.

3. Plastic-faced wallboard: This kind of wallboard is a decorative veneer material that can cover all kinds of substrates with paper printed with various colors and patterns as the substrate, impregnated with melamine resin and phenolic resin, and then hot pressed.

4. Hot-pressed plastic partition: This decorative board is made of plastic bonded partition film as the surface layer, plywood, fiberboard, particleboard and other plates as the base layer, and hot-pressed with adhesive.

4. Select 1 for dado and check the appearance quality.

Mainly test the products with good simulation degree, good quality, realistic patterns, uniform processing specifications, free splicing of strips and good decorative effect. The strip partition shall be sealed with plastic and shall not be deformed.

2, check the hardness and adhesion fastness

The internal quality mainly depends on the hardness of the wallboard surface and the firmness of the adhesion between the substrate and the surface finish. Good quality products have high hardness, impact resistance, wear resistance, no obvious scars on the surface with a knife, and no separation between the surface layer and the substrate.

5. dado 1 installation and wall measurement

Measure the length and width of the wall, and calculate the integer block of the required wallboard according to the size of the wallboard. The extra space should be completed by splicing the wall panels, and the splicing should be distributed at the ends.

2, skirting board installation

Fix the skirting hook on the wall with expansion screws or steel nails. Hook holes are 7.8cm away from the ground, a hook is fixed every 60cm, and then the skirting line with one end processed into a 45 angle is hung on the hook. In areas with high humidity, two skirting boards must be combined to leave appropriate expansion joints, especially in the corners where furniture is placed, and more expansion joints should be considered.

3, dado installation

Insert the wallboard into the skirting line from left to right, and the starting block should be slotted from corner to corner. Install expansion screws or steel nails at a distance of 1.5cm from the top of the panel (in the middle of the width of the panel), and pay attention to the fact that the screws cannot expose the surface of the panel. When the power switch is still encountered in the construction, a hole slightly smaller than the switch can be chiseled with a chisel, and the external angle can be used when the column is encountered. Apply special glue to the groove of the waistline, and insert the concave-convex surface after a few minutes. The corner must be 45 diagonal.

4. Installation of full-height wallboard

First, saw off the convex groove of the first partition and planed it with a plane. Then, from the corner, install a 4.9cm( 1.5in) steel nail on the convex part of the groove every 60cm, and the joint of the groove wedge does not need to be glued. Each piece should be hammered tightly and corrected with a ruler. The last piece needs to be coated with special glue on the back of the wallboard.

6 Cleaning, maintenance and dust removal of dado 1

Dust should be removed frequently, because dust rubs the surface of solid wood wallboard every day. It is best to use clean and soft cotton cloth, and remember not to wipe your solid wood wallboard with sponge or tableware cleaning utensils. Please use wet and wrung cotton cloth when removing dust, because wet cotton cloth can reduce friction, avoid scratching the wallboard, and also help reduce the adsorption of dust by static electricity, which is beneficial to remove dust on the surface of the wallboard. However, water should be avoided from remaining on the surface of the wallboard, and it is recommended to wipe it again with dry cotton cloth. When you dust the wallboard, you should take off your decorations and make sure to handle them carefully.

Step 2 wax

In addition to regular dust removal and cleaning, the surface of solid wood wallboard sometimes needs waxing for further maintenance to increase its beauty. We suggest that a special wax polishing agent for pure wooden furniture should be used for regular maintenance of solid wood partitions. In addition, you must not choose those polishing agents containing silica gel, because silica gel will not only soften and damage the coating, but also block the pores of wood, which is difficult to repair. It is recommended to wax only 1 2 times a year. Excessive waxing will also damage the appearance of the coating.

7 What brand of wallboard is a good recommended brand in the industry? The whole piece of wood is customized with beautiful steps. Holiland Holiland Wind Bird Tucson is the WICANDERSCAROLIM MADANI Maidani Dejia Impression Dehe Family Dehe.