Description method of mopping steps

Picture explanation method of mopping steps

We usually pay attention to the picture explanation method of mopping the floor, and mopping the floor is no exception. If we want to mop the floor more cleanly, then we need to know some steps, so let's share with you the picture explanation method of mopping the floor.

Photo caption of mopping steps 1 Clean the non-stick garbage and dust on the floor with a broom and dustpan.

Put the mop in a bucket or pool, let the mop fully absorb water, and mop the floor with a little water drops, while pushing and collecting. A slightly dripping mop is filled with water, so that when mopping the floor, water can reduce the viscosity of attached substances.

Rinse the dust on the mop surface and the dirty water inside, squeeze the water out of the mop and mop the floor for the second time. This time, take the drag bottle. With the preliminary preparation, the sticky garbage can be easily towed away.

Push with mop head side. This can drag the side of mop head more powerfully and remove stubborn stains.

Wet the clean rag, wring it out, and clean the corners of the floor in the room. When mopping the floor, you will find some corners difficult to mop. After mopping the floor, the original dust in the corner and a little sewage left when mopping the floor will greatly reduce our mopping. Therefore, a rag is necessary.

Check it, drag some small things left on the ground, and mop the floor.

Mopping steps picture explanation method 2 What should I do if I always mop the floor?

Open doors and windows and dry naturally only under outdoor ventilation conditions; Or if you have a fan at home, you can turn the fan to the maximum to dry the water quickly, then dry it with a dry cloth and then dry it quickly. You can also close the door and turn on the air conditioning dehumidification mode to absorb water. You can also put a spoonful of salt in boiling water, wet the towel with hot water, wring it out as much as possible, and then mop the floor to make it dry quickly.

How to mop the floor quickly?

You can mop the floor with salt. Prepare a basin of suitable size, and then pour rice washing water, salt and washing powder into the basin. Pour these three kinds into the basin in the same proportion, stir to dissolve the edible salt and washing powder, and get ready for the most important thing, then we can wipe the floor and get wet after putting the mop in.

Taomi water is weakly acidic water with strong decontamination ability. If you wipe the floor with rice washing water, you can not only clean the floor, but also remove some oil stains to some extent. If it is a wooden floor, it can also play a role in maintaining the floor.

Salt itself is a kind of sterilization. It can soften these stains, accelerate the evaporation of water on the floor, and make the floor dry quickly without damaging the wooden floor.

Can expired shower gel mop the floor?

You can mop the floor.

Shower gel is divided into surfactant types, mainly composed of detergent surfactant, which is gentle and smooth; Soap base, modified according to the principle of soap manufacturing, rich in foam and easy to clean; Surfactants and soap-based compounds are rich in foam and easy to clean. These have a good cleaning effect. Although it can't be used on the body after expiration, it will still have a good cleaning effect if it is used to mop the floor or clean other parts of the house.

Method 3: Add these mopping floors into the water.

First, prepare a mop bucket, add water to it, and then pour in a little salt.

Salt mainly plays the role of sterilization and disinfection, and it can also make the ground dry faster, and then pour a little toilet water.

Toilet water is mainly used to prevent mosquitoes, but also to leave fragrance for the room, and then white vinegar.

White vinegar has a good sterilization and deodorization effect, and finally pour a little conditioner into it.

The conditioner can prevent static electricity and dust from falling to the ground. Finally, put the mop into the prepared liquid and dehydrate it properly to mop the floor.

This mopping the floor can not only prevent mosquitoes, but also prevent dust from falling on the ground, because this conditioner is equivalent to sticking a protective film on the ground, so it is not easy to get dust again.

A mixture of white vinegar, salt and water

Add some white vinegar and salt to the water that mops the floor, which has strong cleaning power and good sterilization and stain removal effect. After mopping the floor, the water evaporates quickly, which is much better than ordinary cold water mopping the floor.

Even the greasy kitchen floor can be cleaned well! This is simple once, and you can leave it alone in a week.

A mixture of hydrogen peroxide and baking soda

Mainly for bathroom floor tiles, because of long-term humidity, there are many dust stains at the joints, which are easy to mold.

Sprinkle baking soda on the cracks in the tiles first, and then pour a small amount of hydrogen peroxide.

Brush gently with a toothbrush, and the dirt in the gap between the tiles will disappear immediately!

Besides detergent, toothpaste can also come in handy. Toothpaste scrubs stains on tiles, which is simple and quick!

How to mop the floor with disinfectant?

Just dilute it.

84 disinfectant is a chlorine-containing disinfectant, which has the function of sterilization and disinfection, and can remove bacteria, viruses and other microorganisms in the air to a certain extent. It is often used for disinfection in homes, hotels, hospitals and other places, but it is highly irritating. When it is used to mop the floor, it cannot be used directly, which will not only harm the floor material, but also endanger human health, and may also cause discomfort such as dizziness.

84% disinfectant mopped the floor

It is generally recommended that the dilution ratio of mopping the floor is 1: 29.

Disinfectant 84 is an efficient disinfectant with sodium hypochlorite as the main component. Colorless or yellowish liquid, corrosive and irritating. When it is used to mop the floor, it is generally recommended to dilute it with water to reduce the concentration of disinfectant 84, which can weaken its irritation and reduce the harm to human body and floor materials. The best dilution ratio of mopping the floor is 1: 29, and the disinfection effect is also good at this time.

Will disinfectant corrode the wooden floor?

It depends.

If you don't mop the floor with diluted 84 disinfectant, it will be corrosive to the wooden floor, the floor may be uneven and the surface may be damaged. If the diluted 84 disinfectant is used to mop the wooden floor, it will not be corrosive, because the wooden floor is coated with a layer of ultraviolet curing paint, which has the functions of anti-friction and anti-corrosion. 84 disinfectant can clean the floor and remove harmful substances such as bacteria on the ground.

Note: It is not recommended to mop the floor with 84 disinfectant for a long time, but it is generally recommended to mop the floor once a week.

How to mop the floor with disinfectant

The steps of sweeping the floor with disinfectant are as follows:

1, prepare 84 disinfectant, cleaning bucket, mop, protective gloves and other protective tools first.

2. Then add a proper amount of water into the barrel and mix evenly according to the ratio of 84 to 1: 29.

3. Immediately soak the mop 1-2 minutes with disinfectant.

4. Finally, after controlling most of the moisture, use it to mop the floor repeatedly for 2-3 times.

note:

1. Wear protective tools when mopping the floor. Don't go barefoot or wear slippers, so as not to hurt the exposed skin and cause redness, rash and other discomfort.

2. When mopping the floor, it is recommended to wear a protective mask to avoid the irritating smell of 84 from affecting the human nasal mucosa, especially those with nasal diseases.

3, 84 disinfectant after mopping the floor, to ventilation 1-2 hours, after waiting for the room smell dissipates, can enter.