Installation method of changing toilet into floor drain

Installation method of changing toilet into floor drain

The installation method of changing the bathroom into a floor drain is to change the original bathroom into a floor drain bathroom. This installation method saves more space than ordinary toilets, and also improves the indoor aesthetics to a greater extent. The following describes the installation method of changing the bathroom floor drain.

1. Measure the position and size of the floor drain.

Before installation, determine the location and size of the floor drain. Usually, the floor drain is located in the center of the bathroom or not far from the center, and the size of the floor drain should be slightly larger than that of the bathroom.

Step 2 pry open the original toilet

After determining the location and size of the floor drain, it is necessary to pry open the original toilet. Before prying open the toilet, be sure to turn off the water and drain the accumulated water so as not to affect the installation process. Unscrew the screw next to the old toilet with a screwdriver, and then draw a line to determine the location of the floor drain.

3. Open the floor drain board

After determining the location of the floor drain, you need to open the floor drain board. If there is a water pipe, it needs to be removed.

4. Install floor drain

Put the floor drain into the floor drain hole and connect it tightly with the ground with screws. If the ground is uneven, a pad can be added at the bottom of the floor drain to make it contact the ground more closely.

Install a new toilet

Before installing a new floor drain toilet, be sure to check whether the position and size are appropriate. If appropriate, you can connect the new bathroom shoulder pipe to the floor drain, fix the base, and connect the water pipe and the water inlet valve.

Connecting drain pipe

After connecting the drain pipe to the floor drain, check whether there is water leakage. If there is no water leakage, turn on the water source and see if the water flow is smooth.

Summary:

The installation method of changing the bathroom floor drain is relatively simple, as long as you follow the above steps, you can easily complete it. When installing a new toilet, pay attention to the position and size of the toilet to avoid unnecessary defects. After installation, pay attention to whether there is water leakage and whether the drainage is smooth.