Traditional Culture Encyclopedia - Hotel reservation - Video tutorial on reversing image installation method

Video tutorial on reversing image installation method

The reversing image installation method is as follows:

1. Remove the rear trunk carpet, two screws on the right side, and remove the storage box and remove the two screws. Connect the video cable, insert the installed video plug and wrap it with tape. Place the video plug cable in the right junction box and remove the rear trunk door handle plate (2 pieces).

2. Remove the lower cover of the rear door, remove the inner panel of the rear door, remove the sealing strip of the rear door, and remove the upper inner panel of the rear door. Install the camera and run the cable through this small hole. Pass this hose and go from the top panel into the right side panel. Enter the junction box on the right side of the rear trunk.

3. Connect the red power cord to the gray wire of this socket (this is the positive pole of the reversing light), connect the black to the ground wire here, restore all the ground screws on the right, and insert the customized video plug into the socket Wrap it up.

How to repair the broken reversing image

If the reversing image is broken, there may be two situations: no image or blurry image.

The problem with the reversing image may lie in the display screen, camera, or line connection.

To check whether the display screen is broken, just try other functions of the display screen. If other functions work normally, this problem can be eliminated.

If there is a camera problem, take a look at the appearance and see if there is any damage. If the appearance is normal, replace the camera with a new one.

If there is a line problem, find the line of the reversing image and check it section by section to see if the line or line connector is normal.

After testing these, finding the problem, and repairing the damaged accessories, whether the display is unclear or the image is not displayed, it can basically be solved.

After doing this, if the image is still unclear, you can find the reverse image restore button in the settings and restore the system to take a look.

Of course, we can solve simple wiring problems and camera problems ourselves, but if repeated attempts fail or the screen needs to be replaced, we can go to a 4S store for repairs.

The role of the reversing image is to help everyone improve their field of vision and improve safe driving. In particular, aspects such as reversing and warehousing play a role that cannot be ignored. Some people have even reached the point where they will not be able to reverse without the reversing image. So, if something goes wrong, fix it as soon as possible.