Traditional Culture Encyclopedia - Hotel reservation - How far is it from Pingxiang to Lushan?

How far is it from Pingxiang to Lushan?

Question 1: How many kilometers is it from Pingxiang to Lushan? 5222 Pingxiang-Lushan 10:52 - 17:54 7 hours and 2 minutes

286 kilometers

Question 2 : How long does it take to drive from Pingxiang to Lushan? I am from Nanchang. My hometown is in Pingxiang and I often go to Lushan. It takes about 3 hours from Pingxiang to Nanchang, and about 2 and a half hours from Nanchang to Lushan. So the whole journey is estimated to take 5 hours. About half to 6 hours.

Driving route: The total distance is about 393.3 kilometers

Starting point: Pingxiang City

1. Driving plan in Pingxiang City

1) From the starting point Start due north, drive 270 meters along Yingbin Road, turn right into Square Road

2) Drive along Square Road for 370 meters, turn right and enter the roundabout

3) Follow Drive around the island for 80 meters. At the third exit, turn right and enter Zhaoping East Road

4) Drive along Zhaoping East Road for 100 meters and turn right into Tongji Bridge

5) Drive along Tongji Bridge for 40 meters, cross the Tongji Bridge on the left, and go straight into Gongyuan South Road

6) Drive along Gongyuan South Road for 920 meters, and go straight into Gongyuan Middle Road

7 ) Drive along Gongyuan Middle Road for 1.2 kilometers and go straight into Gongyuan North Road

8) Drive along Gongyuan North Road for 880 meters and turn slightly right to enter G320

9) Drive along G320 for 1.0 kilometers , turn left into G319

10) Drive along G319 for 3.8 kilometers, turn slightly to the right

11) Drive 130 meters, turn right ahead

12) Drive 1.3 kilometers, after passing the Pingxiang Toll Station (Shangli) for about 120 meters, head toward Yichun, turn slightly right to enter the Pingxiang Interchange

2. Drive along the Pingxiang Interchange for 340 meters, and go straight to the Shanghai-Kunming Expressway

p>

3. Drive 147.4 kilometers along the Shanghai-Kunming Expressway and go straight into Changzhang Expressway

4. Drive 86.0 kilometers along the Changzhang Expressway toward Jiujiang and turn slightly left into Nanchang West Ring Road

5. Drive along Nanchang West Ring Road for 26.5 kilometers and go straight to Xiaojiling Bridge

6. Drive along Xiaojiling Bridge for 240 meters and go straight to Nanchang West Ring Road

7. Drive along the Nanchang West Ring Road for 4.7 kilometers and go straight to the Longquan Bridge

8. Drive along the Longquan Bridge for 440 meters and go straight to the Nanchang West Ring Road

9. Drive along the Nanchang West Ring Road Drive 4.5 kilometers on the ring road and go straight into Changjiu Expressway

10. Drive 3.7 kilometers along Changjiu Expressway toward Jiujiang, turn slightly left and enter Fuyin Expressway

11 .Drive 105.6 kilometers along the Fuyin Expressway, pass the Jiujiang Toll Station, and turn left into the Yangtze River Avenue

12. Drive along the Yangtze River Avenue for 1.1 kilometers, turn right into the roundabout

13. Jiujiang Driving plan in the city

1) Drive along the roundabout for 140 meters, at the 4th exit, turn right and enter Jiuyuan Road

2) Drive along Jiuyuan Road for 490 meters, turn left Turn ahead and enter G105

3) Drive along G105 for 1.6 kilometers and reach the end point (on the right side of the road) End point: Baidu Map of Lushan District

Question 3: How far is it from Pingxiang, Jiangxi to Lushan Driving route: The total distance is about 392.1 kilometers

Starting point: Pingxiang City

1. Driving plan in Pingxiang City

1) Start from the starting point in the north direction and follow the Drive 260 meters on Yingbin Road, turn right into Square Road

2) Drive along Square Road for 330 meters, pass the south gate of Tengda Electric Pingxiang Flagship Store on the left, and go straight into Square Road

3) Drive along Square Road for 70 meters. At the second exit, turn left and enter Zhaoping East Road

4) Drive along Zhaoping East Road for 1.5 kilometers and go straight into Gongyuan Middle Road

5) Drive along Gongyuan Middle Road for 1.1 kilometers and go straight into Gongyuan North Road

6) Drive along Gongyuan North Road for 620 meters and turn slightly right into Wugong Shanzhong Avenue

7 ) Drive along Wugong Shanzhong Avenue for 1.0 kilometers, turn left into Anyuan North Avenue

8) Drive along Anyuan North Avenue for 3.9 kilometers, turn right into Pingshi North Avenue

9) Drive along Pingshi North Avenue for 1.2 kilometers and go straight up the ramp

2. Drive along the ramp for 220 meters and pass the Pingxiang Interchange for about 34 kilometers

After 0 meters, go straight and enter the Shanghai-Kunming Expressway

3. Drive 220.6 kilometers along the Shanghai-Kunming Expressway, toward Nanchang/Jiujiang/Wuhan/S59, turn slightly left and enter the Changzhang Expressway

4. Drive 1.6 kilometers along the Changzhang Expressway and go straight into the Nanchang Ring Expressway

5. Drive 51.9 kilometers along the Nanchang Ring Expressway toward Jiujiang/Wuhan and turn slightly to the left Turn into Fuyin Expressway

6. Drive along Fuyin Expressway for 720 meters, pass Nanchang North Hub, and go straight into Fuyin Expressway

7. Drive along Fuyin Expressway 104.1 kilometers, at the Jiujiang South/Lushan District exit, turn slightly right onto the ramp

8. Drive 590 meters along the ramp and enter the Yangtze River Avenue

9. Driving plan in Lushan District< /p>

1) Drive along Yangtze River Avenue for 390 meters and turn right

2) Drive for 1.0 kilometers and turn left into Shili Avenue

3) Drive along Shili Avenue for 50 meters , turn slightly right into Shili Avenue

4) Drive along Shili Avenue for 210 meters to the end point

End point: Lushan District

Question 4: Two people start from How much does it cost to travel from Pingxiang to Lushan Mountain by car! Driving route: The total distance is about 392.1 kilometers

Starting point: Pingxiang City

1. Driving plan in Pingxiang City

1) Start from the starting point in the north direction and follow the Drive 260 meters on Yingbin Road, turn right into Square Road

2) Drive along Square Road for 330 meters, pass the south gate of Tengda Electric Pingxiang Flagship Store on the left, and go straight into Square Road

3) Drive along Square Road for 70 meters. At the second exit, turn left and enter Zhaoping East Road

4) Drive along Zhaoping East Road for 1.5 kilometers and go straight into Gongyuan Middle Road

5) Drive along Gongyuan Middle Road for 1.1 kilometers and go straight into Gongyuan North Road

6) Drive along Gongyuan North Road for 620 meters and turn slightly right into Wugong Shanzhong Avenue

7 ) Drive along Wugong Shanzhong Avenue for 1.0 kilometers, turn left into Anyuan North Avenue

8) Drive along Anyuan North Avenue for 3.9 kilometers, turn right into Pingshi North Avenue

9) Drive along Pingshi North Avenue for 1.2 kilometers and go straight onto the ramp

2. Drive along the ramp for 220 meters, pass the Pingxiang Interchange for about 340 meters, and go straight into the Shanghai-Kunming Expressway

3. Drive 220.6 kilometers along the Shanghai-Kunming Expressway, toward Nanchang/Jiujiang/Wuhan/S59, turn slightly left to enter the Changzhang Expressway

4. Drive 1.6 kilometers along the Changzhang Expressway, and go straight into the Nanchang Bypass City Expressway

5. Drive 51.9 kilometers along the Nanchang Ring Expressway, toward Jiujiang/Wuhan, turn slightly left onto Fuyin Expressway

6. Drive along Fuyin Expressway Drive 720 meters on the highway, pass Nanchang North Hub, and go straight into Fuyin Expressway

7. Drive along Fuyin Expressway for 104.1 kilometers, at the Jiujiang South/Lushan District exit, turn slightly right onto the ramp

p>

8. Drive 590 meters along the ramp and enter Yangtze River Avenue

9. Driving plan in Lushan District

1) Drive 390 meters along Yangtze River Avenue and turn right

p>

2) Drive 1.0 kilometers, turn left into Shili Avenue

3) Drive along Shili Avenue for 50 meters, turn slightly right into Shili Avenue

4) Drive along Shili Avenue The highway travels 210 meters and reaches the end point

End point: Lushan District

Question 5: How many kilometers are there in Pingxiang City, Jiangxi Province? Driving route: The total distance is about 271.7 kilometers

Starting point: Jiangxi Province

1. Driving plan in Jiangxi Province

1) Start from the starting point in the west direction, drive along Beijing West Road for 70 meters, and pass the Jiangxi Medical Building on the left for about 140 meters After meters, turn slightly right into Beijing West Road

2) Drive along Beijing West Road for 200 meters and turn right

3) Drive 50 meters and go straight into Guanghua North Road

4) Drive along Guanghua North Road for 140 meters and turn left to enter Zhongshan East Road

5) Drive along Zhongshan East Road 210 meters, turn left into Bayi Avenue

6) Drive along Bayi Avenue for 380 meters, turn right into Ruzi Road

7) Drive along Ruzi Road for 2.6 kilometers, go straight into Fusheng Road

8) Drive along Fusheng Road for 930 meters, pass Lido Plaza Building B on the left for about 150 meters, turn right and enter Hongcheng Road

9) Drive along Hongcheng Road Drive 5.1 kilometers, cross the long overpass, towards Changsha/Ganzhou/Wanli, turn slightly right to enter the Chang Overpass

10) Drive along the long overpass for 270 meters, cross the long overpass, turn right ahead and enter Fengsheng Expressway

11) Drive along the Fengsheng Expressway for 18.1 kilometers and go straight into the Nanchang Ring Expressway

12) Drive along the Nanchang Ring Expressway for 12.0 kilometers and go straight into the Nanchang Ring Expressway City Expressway

2. Drive 1.2 kilometers along the Nanchang Ring Expressway and go straight into the Shanghai-Kunming Expressway

3. Drive 72.9 kilometers along the Shanghai-Kunming Expressway toward Guangzhou/Ganzhou /Jinggangshan/Jian direction, turn slightly left to enter Zhangji Expressway

4. Drive along Zhangji Expressway for 1.5 kilometers, pass Zhangshu hub, and go straight to Shanghai-Kunming Expressway

5. Drive 145.0 kilometers along the Shanghai-Kunming Expressway. At the Pingxiang City/Lotus/Shangli/G319 exit, turn slightly right into Pingxiang Interchange

6. Drive along Pingxiang Interchange for 740 meters and pass through Pingxiang Interchange for about 430 meters After meters, go straight into Pingshi North Avenue

7. Pingxiang city driving plan

1) Drive along Pingshi North Avenue for 2.0 kilometers, turn left into Shangxian Middle Road

2) Drive along Shangxian Middle Road for 1.0 kilometers, go straight into Hongshan Road

3) Drive along Hongshan Road for 2.1 kilometers, turn left and enter Guanfeng Road

4) Drive along Guanfeng Road for 620 meters, turn right into Gongyuan North Road

5) Drive along Gongyuan North Road for 80 meters, turn slightly left into Gongyuan Middle Road

6) Go along Gongyuan Middle Road Drive 1.1 kilometers, pass the projector and audio equipment on the right for about 80 meters, and go straight into Gongyuan South Road

7) Drive along Gongyuan South Road for 1.5 kilometers, pass the east gate of Tengda Electric Pingxiang Flagship Store on the right, and go straight to Gongyuan South Road.

Turn ahead and enter Square Road

8) Drive along Square Road for 330 meters, pass the Suning Appliance Plaza Store on the right, turn left into Yingbin Road

9) Drive along Yingbin Road 260 meters to the end point

End point: Pingxiang City

Question 6: How to get from Pingxiang to Lushan Mountain in Jiujiang? The scenery on Lushan Mountain is Jinxiu Valley, Huanglong Pond, Lulin Lake, Sandie Spring, Wulaofeng, Hanpokou and Shimen Stream, but others are not. The most beautiful one is Sandie Spring.

Get off at Jiujiang Railway Station. It is still a long way to Lushan Mountain. You can take a bus to the foot of the mountain.

1. Go to the bus station and take the bus to the north gate of Lushan Mountain, directly to the top of the mountain. The ticket is 180. The get off location is Kuling Town. There are many scenic spots in this place, but the scenery is average. You can take a taxi to other attractions from here.

2. To get to Haohan Slope, you must first take a bus or take a taxi from the train station to the foot of Shili Building, and then take the Lianlu bus to the foot of the mountain. You also need to spend money to buy tickets. You can just walk for a while when you reach the mountain. Go to Kuling Town (that is, the same location as the first method)

3. Take a car to Haihui and pay for it. The car is 5 yuan/person. After arriving at Haihui Town, you can take a taxi to Lushandong You can also walk to the east gate of Lushan Mountain by yourself. It is not very far. The entrance fee is 45. At the end is Sandiequan. The scenery along the way is beautiful. When you get to Sandiequan, you can ask the staff if you go up (people who use the first method to go up Mount Lushan will take the cable car to come down from the top, and then walk for a while and go down to Sandiequan) if you can buy it at the cable car. Take the cable car. If you can, then continue walking up without going back. In this way, you will reach Lushan Mountain. Then you can take a taxi to the various attractions mentioned in the first method.

If you can't go up and take the cable car, then go back the way you came, and then take the bus back to Jiujiang City in Haihui Town.

In fact, if you go there for the first time, you can climb up from Haohan Slope, visit all the scenic spots, and finally visit Sandie Spring, take the cable car on Lushan Mountain to Sandie Spring, and finish playing in Sandie Spring. Finally, without turning back, we walked directly down to Haihui Town, and then took a shuttle bus from Haihui Town back to Jiujiang Railway Station.

There is another route: Shimen Stream. The scenery in this section is also good, comparable to Sandiequan. You can also go up the mountain from Shimen Stream and down the mountain from Sandiequan (walk to Sandiequan) Not tiring, walking up the mountain from Sandiequan is quite tiring, so you can choose to come down from Sandiequan) On the mountain, you can charter a car to visit Hanpokou, Wulaofeng, Jinxiu Valley, and Lulin Lake. There is nothing interesting in other places. of.

Go up the mountain from a road near Shimen Stream (note: it is a nearby road up the mountain, not from Shimen Stream). There are fewer people on that road, and most of them are locals. It usually takes 2 hours to go up the mountain. .

You can take a taxi from the train station to Shili Building in Jiujiang City (about 7 yuan) and take a special bus to Shimenjian. After getting off the bus, you have to walk for a while to reach the entrance of the mountain. You can ask residents nearby for directions, or ask someone to take you. The price is up to you to negotiate. If you are lucky, you might meet a local on the bus. I also want to go up the mountain, maybe even save the entrance fee. Go up the mountain from Wenshu Terrace. After going up the mountain, there are scenic spots along the way, such as Immortal Cave and Flower Path, all the way to Guling Street.

Question 7: I am in Pingxiang and want to go to Lushan. How can I get there? Drive straight to the highway and you will be there soon after getting off the highway (5 hours of driving). There are reminders. It costs more than 200 yuan to enter and there is a parking fee of 80 yuan. If you know the local people, you don't need a ticket. It's best to buy the 80 yuan sightseeing ticket. You won't be allowed to enter many places if you drive by yourself. There are many fee items. Accommodation depends on how you contact them. It costs about 100 for private accommodation and more than 300 for hotels. Don’t eat at roadside restaurants and don’t listen to their boasts. Go to Guling Town. It will take at least 2 days to play. Take the Fairy Cave side on the first day. After the transfer, take a bus back to Guling Town, continue walking here in the afternoon, and then return to Guling Town. Go in the opposite direction the next day. If you know the specifics, you can tell by taking a look at the picture. I don’t recommend going there, it’s very expensive. After watching the plume flying down three thousand feet, you will hate Li Bai. It's better to go to Wugong Mountain.

Didn’t you see it on CCTV that the disguised charge for a single scenic spot in Lushan is more than 1,000?

Question 8: How much does it cost to travel to Lushan from Pingxiang to Jiujiang? The ticket to Lushan is 120, the train from Pingxiang to Nanchang is 22, and the train from Nanchang to Jiujiang is also about 20. I have never been to Lushan recently.

Question 9: How many kilometers from Yichun to Lushan? Driving route: full journey About 332.0 kilometers

Starting point: Yichun City

1. Driving plan in Yichun City

1) Start from the starting point in the due east direction, drive 50 meters, and go to the right Turn

2) Drive 60 meters, turn right into Fuqian Road

3) Drive along Fuqian Road for 470 meters, turn right into Yiyang Avenue

4) Drive along Yiyang Avenue for 1.9 kilometers, and go straight into Yiyang Avenue

5) Drive along Yiyang Avenue for 340 meters, at the first exit, toward the direction of Shanghai-Kunming Expressway/Wanzai, turn right and enter Yichun Avenue

6) Drive along Yichun Avenue for 2.0 kilometers, toward the Shanghai-Kunming Expressway Jiangxi Section/Pingxiang/Xinyu direction, turn slightly right into Yichun Interchange

2. Drive along Yichun Interchange 1.2 kilometers, go straight and enter the Shanghai-Kunming Expressway

3. Drive 90.3 kilometers along the Shanghai-Kunming Expressway, toward Nanchang/Yingtan/Ji'an/Jinggangshan, turn slightly right and enter Zhangshu Junction

4 .Drive along the Zhangshu hub for 1.6 kilometers and go straight into the Shanghai-Kunming Expressway

5. Drive along the Shanghai-Kunming Expressway for 73.3 kilometers towards Jiujiang/Nanchang/Wuhan/S59 and turn slightly left to enter the Shanghai-Kunming Expressway

p>

6. Drive along the Shanghai-Kunming Expressway for 1.2 kilometers and go straight into the Nanchang Ring Expressway

7. Drive along the Nanchang Ring Expressway for 52.9 kilometers and go straight into the Fuyin Expressway

8. Drive 104.3 kilometers along the Fuyin Expressway, at the Jiujiang South/Lushan District exit, turn slightly right onto the ramp

9. Drive 580 meters along the ramp, turn right onto Yangtze River Avenue

< p> 10. Driving plan in Lushan District

1) Drive 380 meters along Yangtze River Avenue and turn right

2) Drive 1.0 kilometers and turn left into Shili Avenue

< p> 3) Drive along Shili Avenue for 100 meters, turn slightly right and enter the Shili Avenue auxiliary road

4) Drive along Shili Avenue auxiliary road for 150 meters to the end point

End point: Lushan District< /p>

Question 10: How long does it take to get from Pingxiang to Jiujiang? Driving route: The total distance is about 395.9 kilometers, the journey takes about 4 hours

Starting point: Pingxiang City

1. Driving plan in Pingxiang City

1) Go straight from the starting point Starting from the north, drive along Yingbin Road for 260 meters, turn right into Guanghua Road

2) Drive along Guanghua Road for 330 meters, pass the south gate of Tenda Electric Pingxiang Flagship Store on the left, and go straight into Guanghua Road< /p>

3) Drive along Square Road for 70 meters. At the second exit, turn left and enter Zhaoping East Road

4) Drive along Zhaoping East Road for 1.5 kilometers and go straight into the park Middle Road

5) Drive along Gongyuan Middle Road for 1.1 kilometers and go straight into Gongyuan North Road

6) Drive along Gongyuan North Road for 620 meters and turn slightly right to enter Wugong Shanzhong Avenue

7) Drive along Wugong Shanzhong Avenue for 1.0 kilometers, turn left into Anyuan North Avenue

8) Drive along Anyuan North Avenue for 3.9 kilometers, turn right into Pingshi North Avenue

9) Drive along Pingshi North Avenue for 1.2 kilometers and go straight onto the ramp

2. Drive along the ramp for 220 meters, pass the Pingxiang Interchange for about 340 meters, and go straight onto the Shanghai-Kunming Expressway

3. Drive 220.6 kilometers along the Shanghai-Kunming Expressway, toward Nanchang/Jiujiang/Wuhan/S59, turn slightly left onto the Changzhang Expressway

4. Drive 740 meters along the Changzhang Expressway , pass Houtian Hub, and go straight into the Nanchang Ring Expressway

5. Drive along the Nanchang Ring Expressway for 51.9 kilometers, heading towards Jiujiang/Wuhan

, turn slightly left and enter Fuyin Expressway

6. Drive 720 meters along Fuyin Expressway, pass Nanchang North Hub, and go straight into Fuyin Expressway

7. Drive along Fuyin Expressway Drive 104.1 kilometers on Yin Expressway. At the Jiujiang South/Lushan District exit, turn slightly right onto the ramp

8. Drive 590 meters along the ramp and enter Yangtze River Avenue

9. Jiujiang City Internal driving plan

1) Drive along Changjiang Avenue for 2.2 kilometers, turn right into Changhong West Avenue

2) Drive along Changhong West Avenue for 1.1 kilometers, turn slightly left into Changhong Avenue< /p>

3) Drive along Changhong Avenue for 1.9 kilometers, pass the Jiujiang Bank Building on the right for about 140 meters, turn left

4) Drive 40 meters, turn right

5) Drive 50 meters and turn left

6) Drive 130 meters and reach the end point (on the right side of the road). End point: Jiujiang City