How to wash mlb tooling down jacket

The washing method of mlb tooling down jacket is as follows:

1. If the down jacket is only a little dirty locally, it doesn't need to be cleaned as a whole, because ordinary down jacket fabrics are not afraid of water. Just drop a few drops of collar cleaner or detergent in a dirty place and dry it with a wet towel after a few minutes. If it is not clean once, repeat it several times.

2. In order to prevent the filler from being eroded by excessive alkaline substances, a small amount of neutral washing powder or detergent can be selected, mixed with warm water at 35 degrees Celsius, and the clothes are completely soaked in the washing liquid 15 minutes.

Put the clothes on the washbasin washboard or other flat plates, and brush them off in turn with a soft brush. Don't rub them hard to prevent the down from knotting, and then squeeze out the washing liquid, but don't twist the clothes hard. Put the rinsed down jacket into a net bag to drain the water, so as to avoid excessive water, heavy weight and deformation when drying. When it doesn't drip, take out your clothes and put them in a ventilated place to dry. Don't expose them to the sun or bake them. When it is about to dry, you can pat it gently with your hands or a small wooden stick to restore the down to a natural fluffy state.

3. In order to avoid soap stains on the down jacket fabric, in addition to properly controlling the concentration of the washing liquid, two spoonfuls of vinegar can be added to clean water after bleaching twice, which can neutralize the residual washing liquid in the down jacket.

However, it must be noted that the water with vinegar must be warm, so that the washing liquid in the down jacket will be fully dissolved in the water. If the washed down jacket has soap stains, you can wipe it repeatedly with clean cotton dipped in industrial alcohol, and finally wipe it with a hot towel to remove the soap stains.