How to use CAD to model a three-dimensional chair model? A course of modeling three-dimensional chair model with CAD

AutoCAD complete self-study book (basics-plane-3D-modeling-case)

Tianzheng building CAD zero-foundation introduction to proficient tutorial

CAD construction drawing deepening skills practical tutorial

CAD+3Dmax+PS+Sketchup interior design full video course

Learn to draw CAD floor plans in one hour

The new edition of basic introductory course

AutoCAD is a very widely used 2D and 3D software, which is mainly used in manufacturing, engineering design, electrical and electronic circuits and other industries, so there are many students studying CAD. Feather rabbit is the first choice platform for online learning CAD. There are various tutorial courses from basic to advanced, such as "AutoCAD22 tooling construction drawing and deepening tutorial", which can help students who study CAD quickly master CAD construction drawing. Not only that, but also provides many professional CAD courses, including software use, mechanical drawing, architectural drawing, interior design and so on.

tutorial on modeling a three-dimensional chair model with CAD

1. Open CAD, create a new blank file, change the classic mode to the three-dimensional modeling mode, and change the viewport to the axial side view port.

2. Draw the legs first. See the figure below to activate the cylinder command

3. The chair legs are drawn.

1) enter the coordinates ,,, and press enter

2) enter the diameter 6, press enter

3, enter the height 1, and press enter.

4. Activate the array command and draw the other three legs.

1)AR, press enter

2) set the parameters, row 2, column 2, row offset 1, column offset 1, angle

3) select the drawn cylinder, press enter

4) confirm

5, draw the chair surface

1) activate the cuboid command

.

1) Enter UCS, and press Enter

2) Left-click the middle point on the right side of the chair surface, and press Enter

8. Draw a rectangle with a length of 15 and a width of 2 on the chair surface

9. Stretch the drawn rectangle upward by 15, and the chair back will be finished.

1. Do you see the red box in the picture below? Activate it and use it to rotate the back of the chair, then the chair will be really drawn. This is a bit difficult to elaborate, but you can understand it with a little try.

11. Rendering effect.

that's all for the tutorial of modeling three-dimensional chair model with CAD. Click this link to learn more about CAD tutorial: