How to clean and polish floor tiles without leaving watermarks?

You can choose a mop or rag with strong water absorption, or you can use baking soda and detergent to mop the floor; Or use a combination of wet mop and dry mop, mop the floor with a clean wet mop first, and then wipe off the watermark with a dry mop after the floor is cleaned, so that the watermark will not be left when the floor is dry.

1. To solve the problem of mopping tiles without watermark, you can add baking soda and detergent to the water that mops the floor, then stir and mix, and then clean the mop. When mopping the floor, you can keep the mop wet, and you don't need to change the water too often to ensure that all the stubborn dirt on the floor is dragged out. Next, clean the dirty water on the ground with a dry sponge or rag, then wash it and drag it again without leaving a watermark.

2. Two mops can be prepared at the same time. First, clean the tiles with a wet mop. After cleaning the floor, remove the watermark with a dry mop. When the floor is dry, it will not leave a watermark.

What are the cleaning methods for ceramic tiles?

1, floor tile gap dirt cleaning

Dust accumulates in the cracks of floor tiles, and it is easy to get moldy after a long time. The traditional ceramic tile construction often uses cement and silica gel instead of caulking agent, and some even do not use caulking agent, which will naturally leave gaps. As long as good caulking agent is used in tile construction in the early stage, the problem of moldy cracks between tiles can be completely prevented. The most suitable time to use caulking agent is within 48 hours after the tile is pasted. Before construction, the stones in brick joints should be removed, and ventilation and air drying should be maintained. Then, the caulking agent should be pressed into the gap like batch of soil, and then the residue on the brick surface should be cleaned up.

In addition, don't think that only the wooden floor needs waxing. Waxing the installed tiles is also an important protection and maintenance step. Laying a layer of wax after laying tiles will have twice the result with half the effort. Polishing and waxing can be done once every six months if it is not too much trouble. If we persist in this work for a long time, it will be effective, especially those expensive high-grade tiles. Waxing floor tiles is similar to floor waxing. Pay attention to cleaning the surface of ceramic tile before wax surface treatment, and apply wax evenly on the floor tile. Generally, don't trample on the surface for 8 days after waxing, and wait for air drying. If it is re-waxing, attention should be paid to removing the old wax with wax remover first, otherwise it is likely to cause uneven surface after waxing.

2. Cleaning of kitchen tiles

The maintenance of kitchen tiles is a difficult problem for many housewives. Because of the oil smoke, kitchen tiles are the easiest to get dirty and the most difficult to clean. After a long period of use, kitchen tiles are also faded. In fact, the easiest way is to stick anti-pollution stickers before using kitchen tiles. At present, there are many choices for the color of anti-pollution stickers, which can be selected according to the design of the kitchen.

Stick a circle near the range hood and cooker where it is easy to spill oil. When cleaning, wipe it with ordinary detergent and rag. Change it every few months to keep the kitchen tiles fresh forever. When cleaning, be careful not to use too hard cleaning cloth or steel balls, which will scratch the sticker and thus fail to protect the tiles.