How to install the camera on the camera bracket

1. First, install a quick mounting board for the camera. There is a screw hole in the camera. Screw in the screws on the quick mounting plate and fix them. When tripod is often used for external shooting, a quick mounting plate can be installed on the camera for easy use;

2. Fix the tripod, take it out first and then unfold it. The position of the foot is provided with a limit groove for selecting the opening angle, and the limit groove of the same gear is selected;

3. Then, adjust the length. For stability, the tripod is divided into several parts. Each one should be lengthened step by step. In other words, each tripod chooses to open the same section, loosen the fixing screw, and stretch out the tripod to tighten the screw to fix it;

4. Put the bracket flat, at least to ensure stability, not shaking and falling;

5. Adjust the translation/tilt. Usually, the spherical pan-tilt has three adjustment knobs. One is a horizontal knob, and the other two are ball fixing knobs. Loosen them and you can turn the ball to any angle. Then tighten and fix; When shooting horizontally, you can observe the level on the tripod head first, and then install the camera after adjusting the level of the tripod head. If you want to choose an angle to shoot, you must first install a quick assembly board to stabilize the camera during the adjustment process. Tighten the fixing knob after adjusting the angle;

6. Finally, the shooting of photos. Hands on a tripod will shake slightly. You can add a line to release it to avoid hand shake affecting shooting.

Second, are the micro-single and SLR tripods universal?

The tripod of single camera and SLR camera is of course universal. They all use 1/4 screw sockets. There are also most cameras with this screw interface, which can be used for most ptz. Whether the tripod is equipped with a camera depends mainly on the maximum load. SLR cameras are generally heavier than miniature single-phase cameras, so it is no problem to use them directly on miniature single-phase cameras.

The tripod of any camera is universal, because the key tripod screw size is mainly 1/4 inch.