Traditional Culture Encyclopedia - Photography major - How to clean platinum jewelry?

How to clean platinum jewelry?

Question 1: How to clean platinum jewelry with diamonds? Cleaning method of diamond-encrusted platinum jewelry;

1. Wash with toothpaste or detergent. Just squeeze a proper amount of toothpaste on soft towels and other fabrics, then spread it evenly, and then gently wipe it back and forth on platinum ornaments, which can well remove the dirt and sweat stains accumulated on the surface for a long time.

2. Use diluted detergent [neutral], and finally rinse with pure water or clear water; You can also wrap all jewelry with toothpaste for about 10 minute, take out the toothpaste and wash it with warm water. After cleaning, the jewels regained their bright luster.

3. Use professional developing powder (available in photographic equipment stores), put a small amount of developing powder into a vessel, add water and stir evenly until it is completely melted, then soak the platinum jewelry in it for more than 5 minutes, and finally rinse it with clear water several times and dry it.

Question 2: How to maintain and clean the platinum necklace! Platinum is a common name, but it is actually platinum.

Use special jewelry cleaner (such as ultrasonic cleaner) or soak in mild soapy water, and then gently wipe with a soft cloth.

Send platinum jewelry to professional cleaning every once in a while. Platinum jewelry inlaid with precious stones should be professionally cleaned once every six months.

If properly maintained, platinum jewelry should not need any maintenance. When you need to make some adjustments, such as resizing, polishing or cleaning, you need to go to a jewelry store with a professional platinum craftsman.

Question 3: how to clean the platinum bracelet 1? Soak in cleaning solution. Put the platinum bracelet in the cleaning solution for 5 minutes, then rinse it with clean water and wipe it with a dry cloth. This method is used once a month 1 time. Pay special attention not to soak the platinum bracelet with bleach.

2. Wash with developing powder. Pour clear water into a glass container, then add a proper amount of developing powder, stir well, soak the platinum bracelet in it for 5 minutes, then rinse it with clear water and wipe it with a dry cloth. Beloved platinum jewelry will be as bright as new.

3. Just squeeze a proper amount of toothpaste on soft towels and other fabrics, then spread it evenly, and then gently wipe it back and forth on the platinum bracelet, which can well remove the dirt and sweat stains accumulated on the surface for a long time; Finally, rinse with pure water or clean water; You can also use toothpaste to evenly wrap the jewelry for about 10 minutes. Take out the toothpaste and wash it with warm water. After cleaning, the jewelry recovered its original bright luster.

4. If you want to clean it thoroughly, it is recommended to send it to a jewelry store for professional ultrasonic cleaning. In particular, platinum necklaces, rings, earrings and other jewelry inlaid with diamonds must be professionally cleaned.

Question 4: How to clean the platinum ring? I love you less than a word.

Question 5: How do you clean yellow and platinum jewelry? You can take some detergent and a toothbrush, then drop the detergent on the bristles of the toothbrush, dip it in some water and brush it back and forth against the jewelry. If there is a small hole that can't be washed out, you can hit it twice with toothbrush hair. When you feel almost the same, just rinse it with water and dry it with a hair dryer, including exposure. Be safe!

Question 6: What is the most convenient way to clean platinum? Every marriage begins with a platinum diamond ring, so how to clean this platinum jewelry that injects life, and what to use to clean it without damage? This problem has troubled many women. Today, Diamond Bird will talk to you about how to clean platinum and what is the most economical. Anyone who knows a little about chemistry knows that the chemical properties of platinum are very stable, so it is difficult to be corroded by chemicals and the hardness is not easy to scratch. Therefore, platinum jewelry is easy to maintain and does not need to be cleaned by complicated methods. Of course, it depends on different situations. Now let's talk about how to clean platinum according to different "dirty" degrees, and what is the most affordable to clean platinum. 》》》》》》》》》》》》》》》》》》》》》》》》》》 Soak the jewelry to be cleaned in the cleaning solution for about five minutes, then pick it up (be careful not to take it directly by hand) and rinse it with clear water. And you can also use detergent to clean platinum ornaments. The method is also very simple, as long as it is soaked in diluted detergent and finally washed with pure water or clear water, the platinum jewelry will be very shiny. Finally, Diamond Bird reminds everyone that it is best not to use toothpaste to clean platinum ornaments. Since everyone knows how to clean platinum is the most convenient and what is the most affordable to clean platinum jewelry, let's make a beauty for our platinum jewelry! Editor: Tan Su

Question 7: How to clean silver jewelry and platinum jewelry? How to clean the silver ornaments?

Tell you three simple cleaning methods to make your jewelry glow again:

1. Buy a pack of developing powder from the photographic equipment store, mix it with clean glassware and 1000 ml water after going home, stir it evenly, soak the jewelry in it, take it out in about 5- 10 minutes, rinse it with water, and then wipe it with a dry cloth, as bright as new.

2. Take 2 grams of salt, 7 grams of baking powder, 8 grams of bleaching powder and 60 ml of clear water, stir well, put the jewelry in, soak it for about 2 hours, take it out, rinse it with clear water, and dry it with a cloth. It will be much brighter.

3. Make full use of all kinds of cleaning agents at home. Jewelry is not as delicate as you think, just dilute it with water for washing dishes and fruits at home.

1, the best way to maintain silver jewelry is to wear it every day, because human oil can produce a natural and moist luster.

2. Don't wear other precious metal jewelry when wearing silver jewelry to avoid collision, deformation or wear.

Keep the silver ornaments dry, don't wear them to swim, and don't go near hot springs and seawater. When not in use, you can gently wipe the surface with cotton cloth or paper towel to remove moisture and dirt, and put it in a sealed bag or box to avoid contact with air.

If the silver ornaments show signs of yellowing, the easiest way is to gently wash the surface with toothpaste and some water. Or use a small jewelry brush to clean up the fine seams of the silver ornaments, and then gently wipe the surface with a silver cloth, and the original aesthetic feeling of the ornaments can be restored immediately. (If the silver cloth can restore about 80% to 90% of silver, don't use silver lotion and silver washing water, because they are corrosive to some extent, and silver ornaments are more likely to turn yellow after using these products. In addition, silver cloth contains silver maintenance ingredients and cannot be washed with water)

5. The silverware is seriously yellowed, so it should not be soaked in silver washing water for too long, usually in a few seconds. Rinse with clear water immediately after taking it out, and then dry it with a paper towel.

Common surface treatment methods of silver jewelry

The easy oxidation of silver is its weakness, and it is also a headache for consumers and producers. At present, the common silver surface treatment methods in the domestic market are further oxidation, electroplating and untreated.

Whether it is further oxidized or untreated, the characteristics of silver oxidation blackening are fully utilized. Using oxidants to deepen the oxidation of the silver surface, or using the natural oxidation of the silver surface to produce richer colors and mechanism effects in silver jewelry, so that the defects are not concealed, is a method of exerting strength.

The real way to prevent the surface oxidation of silver jewelry is electroplating. At present, the commonly used methods are silver plating, rhodium plating, palladium plating and so on.

The silver jewelry produced by European goldsmiths mainly adopts deep oxidation treatment and sandblasting electroplating treatment.

Question 8: How to clean platinum jewelry! ! How to clean platinum ornaments

Platinum jewelry refers to jewelry mainly composed of platinum group elements. There are mainly platinum and platinum ornaments as well as palladium and platinum ornaments on the market. Among them, platinum ornaments are more valuable than gold, and the price is 30%-50% higher than gold. Platinum jewelry has pure white color, no discoloration, no deformation and stable chemical properties. Like gold, it can slowly dissolve in aqua regia and does not react with other acids. Pure palladium and platinum jewelry is similar to pure platinum and platinum in appearance, much like the color of silver or stainless steel. The color is pure white, but the price is lower than that of gold, which is less than 40% of the price of gold. Its specific gravity is light and it can slowly dissolve in aqua regia. Platinum, platinum and palladium platinum are often used to make precious gem ornaments because of their high hardness, corrosion resistance and golden, bright and lasting luster. At present, the popular platinum ornaments on the market include pure platinum and pure palladium platinum. Usually, palladium and platinum are mixed into platinum and platinum, and its purity decreases with the increase of palladium and platinum content to meet the different needs of different levels and incomes for high, medium and low platinum. Platinum cleaning is basically the same as gold. However, due to the catalytic properties of platinum, it will bubble violently in hydrogen peroxide, so hydrogen peroxide is not suitable as a cleaning agent for platinum. If it is high purity platinum,

The following methods can be used for cleaning:

1. Take 1000 ml of warm water at 40℃, then slowly add 30 ml of concentrated sulfuric acid into the water along the glass rod (this process is irreversible), and then add anhydrous chromic anhydride100 to make a solution. When cleaning, first soak the platinum jewelry in the cleaning solution for 5 minutes, then brush it with a brush, and finally rinse it with clear water.

2. Add 200ml of glacial acetic acid into1000ml of warm water at 40℃ to prepare a cleaning agent, soak the platinum jewelry in the cleaning agent for about10min, then brush it with a brush, and finally rinse it with clear water. After cleaning, 500 grams of cold boiled water, 40 grams of alumina powder and No.40 detergent can be used as polishing agents for polishing. Finally, apply some nail polish or clock oil to improve the luster.

Under normal circumstances, K gold other than pure gold, whether it is 18k platinum or gold, will fade if worn for a long time!

First of all, it is best to take off platinum jewelry when doing housework and cleaning. Oil stains, bleaching powder and various cleaning chemicals will affect the luster of platinum, and even make platinum appear pale yellow and spots.

Secondly, when collecting and keeping platinum, it should be placed separately to avoid mixing it with other jewelry, especially gold jewelry, because gold is soft and platinum is hard. When they are put together or worn together, it is easy to cause friction and damage to the surface of gold, and gold is also easy to make platinum yellow and affect the color of platinum. Finally, when doing heavy work such as handling, you must take off the platinum jewelry. Although platinum is hard, it will be damaged if it is hit and scraped hard.

Question 9: How to clean platinum jewelry or diamond jewelry at home? You can take it to the jewelry counter. They are all washed with special ultrasonic waves. It's bright after washing. Wash it as long as it doesn't feel bright! The effect is obvious ~ ~ Besides, you can also do it yourself:

1. The detergent usually used for washing dishes and fruits is a very economical platinum jewelry detergent after being diluted with water.

2. Buy a pack of developing powder from a photographic equipment store, put a small amount into a clean glassware, add water and stir evenly, then soak the platinum jewelry in it for 5~ 10 minutes, then take it out, rinse it with water and wipe it with a dry cloth, and the beloved platinum jewelry will be as bright as new.

Wrap the jewelry with toothpaste, wait for an hour or two, and then wash it with hot water when the toothpaste is dry, which can make the necklace as bright as new.

Question 10: How to clean the platinum ring to make it brighter? Generally, dirt can be directly washed with detergent or soap, and gently brushed with a soft toothbrush. The chemical properties of platinum are very stable, and it is not easy to be corroded by chemicals and scratched, so platinum jewelry is easy to maintain and does not need to be cleaned by complicated methods. If you take it for a long time, just take it to the jewelry store and let them clean and polish it with equipment. The jewelry store has free after-sales service. It is best not to wash with toothpaste. There are very fine and hard substances in toothpaste, which will not only make the jewelry look brand-new, but also leave scratches on the jewelry, making it dull and affecting the luster.

If you want to be professional, you can also buy a small ultrasonic cleaning machine. Taobao buy 150 or so.

If it is cleaned outside, the jewelry store also has an ultrasonic cleaning machine. They are all washed with clean water without damaging the ring.

If the ring is scratched after being worn for a long time, you can take it to the jewelry processing shop and ask them to polish it for you.

Deal in 20 yuan. After polishing, it will be as good as new. Polishing is polishing. Removing a very thin damaged gold layer is hard to ignore.

Maintenance of platinum jewelry

Store platinum jewelry separately in a jewelry box or suede bag to prevent other jewelry from being scratched.

Please don't wear platinum jewelry when doing housework, gardening and other types of heavy work or physical activities. When wearing platinum jewelry, please don't touch bleaching or * * * chemicals. Although chemicals will not damage platinum, they may discolor diamonds or precious stones.

Regularly clean platinum jewelry, you can use jewelry cleaners sold in the market, or soak them in a solution of soap and warm water, and then gently wipe them with a soft cloth. Platinum ornaments inlaid with precious stones need to be cleaned once every six months.

If there are scratches visible to the naked eye, or a natural oxide layer appears on the platinum surface, please take the platinum jewelry to a qualified jeweler for polishing. The scratches on platinum are only metal displacement, and the volume will not decrease.

Jewelry is adjusted, resized, polished and cleaned by qualified jewelers. Ensure that jewelers have trained platinum assemblers.