What is the problem with ipc disconnection alarm?

To solve the problem of ipc disconnection alarm, it is necessary to determine whether the number of IPC connected by multiple switches is balanced. If not, please adjust the number of IPC connected to each switch and distribute network resources evenly. Determine whether the network bandwidth of the NVR device is sufficient. If not, connect the NVR device to the Gigabit network port of the switch.

Ensure that the cable crystal head is well pressed. If not, please do it again.

Causes and solutions of frequent disconnection of IPC network camera

In fact, the frequent disconnection of webcams involves too many aspects. For example, camera internal programs, hard disk video decoder resources, network transmission and so on. In fact, it boils down to two major problems: soft and hard.

The soft problem is simply caused by the matching of camera software protocols. At present, the camera update speed is fast, and it is inevitable that some soft bugs will appear. Therefore, choosing products of well-known brands and updating the internal procedures of your camera can often play a very good role in preventing and solving some soft problems.

The hard problem is that the resources of video recorders are not enough, which is particularly prominent in the era of PC video recorders in the analog era, but there is no guarantee that there will be none now. Especially when a large number of network video recorders are running at full capacity. There is also a more core hard problem, that is, transmission, which is the key point.

The solution, first try the elimination method, first determine whether it is an IPC problem or a line problem. If there is an IPC problem, let the corresponding after-sales upgrade software try. If there is a line problem, you need to check the line formation.