How to disassemble an apple

First, turn off the mobile phone, take out the sim card and take out the screws on both sides of the data line interface;

2

Suck the screen near the Home button with a suction cup and pull out an opening. Note that the angle between the front panel and the fuselage should not exceed 90 degrees, because there is a flat cable at the top of the fuselage to connect them;

In order to avoid short circuit of components during disassembly, the power supply of the motherboard should be cut off and the shielding cover of the power supply connection wire should be removed.

Gently pry open the interface between the power supply and the motherboard with a pick;

Then we remove the shielding cover of the cable part connected to the front panel;

Also pry open the flat cables one by one, a total of four. The four cables are display, touch, optical fiber and touch ID cables respectively;

Let's take a look at the overall picture of the front panel. The touch ID cable bypasses the top, and we will start the work on the front panel later. This kind of adhesive tape will lose its viscosity when stretched, so the battery will not find glue marks when it is taken down;

Remove the protective cover from the camera. By the way, there is a white bar in the middle of the picture, which is a sign of water inflow. When the water entry sign changes color, you can judge whether to enter the water according to the color here.

Next, remove the motherboard, first unplug the bottom patch cord below the motherboard;

Then remove the antenna. Pay special attention here. Push hard from the end of the antenna and keep your hands steady. There is a "parent-child" screw near the camera. The "parent-child" screw is a "child" screw on top of another screw, which is very ingenious in structure;

Next, remove the shielding sleeves of the volume cable and the boot cable, and pry open the two cable sockets with a pick;

Then remove this widget to fix the microphone. Be careful when disassembling, or you will lose it carelessly. Unscrew a few more screws and remove the rear plug cable. Take it apart a little here. Many netizens are curious about Cato's principle. As you can see, the principle of this place is actually very similar to the seesaw. At this point, this disassembly step is almost completed; The above are the methods and precautions for disassembling Apple's mobile phone. I hope reading this article will help you.