Traditional Culture Encyclopedia - Photography major - How is fluorite cloud connected to monitoring?
How is fluorite cloud connected to monitoring?
Question 2: How does the fluorite cloud connect to the monitoring 1? Download the correct version of fluorite cloud.
Second, in the same network state,
Scan the QR code on the surveillance camera with fluorite cloud.
Third, set it on the fluorite cloud as required.
You can install and debug monitoring.
Finally, use different networks to test.
For example, use traffic to check surveillance cameras.
Question 3: I downloaded the fluorite cloud. How can I contact the monitoring of my unit? You need to know the serial number of fluorite cloud, and the monitoring of the unit should be networked.
Generally, cameras are equipped with a CD with IP modification tools and client software, or downloaded directly from official website.
Webcams all have ID numbers for remote use, so a mobile phone is installed on the mobile phone, and the remote client can monitor it by inputting the ID number and user name and password.
Question 4: fluorite cloud is registered, the wifi password is correct, and all video surveillance network cables are connected correctly. Method 1:
1, open the browser-enter 192. 168. 1 (this is a general router address), enter the route-enter the user name and password (default is admin).
Method 2:
1. The address, account number and password of the router are all on the back of the router.
Method 3:
1. Reset the router.
2. The address, account number and password of the router are all on the back of the router.
Question 5: How to connect fluorite camera to mobile phone tools: fluorite camera, Apple phone or Android phone?
Step 1: Open the package, and steel plates and foam will be attached for installation. Use these devices directly to install the camera where it is needed.
2. Take out your mobile phone and go to the app store to download an app called "Fluorite Cloud Video" (other camera brands have their own corresponding apps, which can be found online).
3. After downloading, register and log in with your mobile phone number.
4. Click Add Device, the code scanning interface will pop up, and then scan the QR code on the camera, and it will be automatically bound after a while!
5. Open the app, you can see the monitoring screen of the camera, and any alarm information will be pushed through the app.
If it is another camera, the method of binding the phone is basically the same.
Question 6: Why can't fluorite clouds be seen in video surveillance? It is very stable. If you can't see it, your camera network is disconnected and the fluorite cloud platform is started.
Question 7: I downloaded and installed the computer version of fluorite cloud video software. How to connect local monitoring equipment? Which god knows? Urgent need for consultation. There is a model on the monitoring equipment, which is generally entered on the back of the machine, provided that the monitoring equipment is also networked.
Question 8: How to connect the home master monitor to the video scanning box of Shadow Cloud? Just download the QR code, register your account, and add the QR code of the code scanner. If it is impossible to estimate that the machine sold to you has been registered to add, you cannot add it. You need the other party to unhook before you can operate.
Question 9: How does fluorite cloud watch, monitor and visit the user name and password of fluorite official website on the website?
Question 10: Connect Hikvision monitor to fluorite cloud and scan the QR code under the device. It always shows that the network is not connected. Ask the master to help me and tell me the specific solution. This is because the network configuration of the monitoring equipment is incomplete or wrong.
1. Check whether the IPV4 address of the device matches the IP address segment of the local router;
2. Check whether the default gateway setting of the device is correct, which can be directly specified as the IP address of the local router, such as192.168.1.1;
3. Check whether the preferred DNS setting of the device is correct, which is the same as the default gateway setting;
4. Check whether the connection between the device and the local router is normal.
5. Check whether the equipment has turned on the fluorite cloud function. After checking the above settings, check whether the fluorite status is online. If online, you can add it normally.
- Previous article:What studios are recommended for taking wedding photos in Taiyuan?
- Next article:How about Hangzhou Juheng Education Technology Co., Ltd.?
- Related articles
- Shenzhen Taobao products photography company
- What does Hukou Waterfall do?
- Where is Sakura Avenue in Luopu Park?
- What exactly does the macro function of the camera do?
- Where are these mainland stars from?
- How do travel bloggers make money while traveling?
- Teach you how to take photos of a soft backlit girl
- Hard seat ticket from Shijiazhuang to Changde
- What kind of app does iPhone have for fast-cutting, mixed-cutting and easy-to-use video editing?
- Beautiful ancient poems about marriage