How to shoot the moon to get rid of the light

The steps of shooting the moon to remove light are as follows:

Mobile phone: Huawei mate40

System: EMUI 1 1

Software: camera

1, adjust ISO (sensitivity)

After the screen of the mobile phone is maximized, you will see the ISO option when you turn on the professional mode of the mobile phone. When shooting the moon scene, reduce the sensitivity as much as possible to avoid the lens of the mobile phone receiving too much light and the moon becoming a "light spot". Adjust the ISO to the lower limit of 50. It can be found that after the sensitivity of the picture becomes lower, the noise in the sky becomes less and purer, and the surface details of the moon gradually emerge.

2. Adjust the aperture and shutter time

The smaller the aperture number, the larger the aperture, and the more light enters at the same time. Models without iris can skip the previous step and directly adjust the shutter time to take high-brightness photos. Hand-held shooting easily leads to picture jitter, and the final effect is very poor. Use the bracket for long exposure shooting.

By default, the shutter time is about 1/45 seconds in a sunny room and about 1/8 seconds in a dark environment. The longer the exposure time, the higher the brightness of the picture. When shooting the moon scene, the brightness and details are adjusted to11000 seconds to keep a basic balance.

3. focus manually.

Adjust the AF (focus distance) by moving the horizontal bar left and right manually, and the focus segment can be adjusted to the farthest position to clearly aim at the moon position, so that the mobile phone can be automatically focused without manual adjustment.

Step 4 Adjust the color temperature

Manual adjustment of ISO sensitivity, aperture size and shutter time can prevent the moon from being shot into a big ball of light, which is limited by the zoom ability of the mobile phone. Compared with the automatic mode, the final effect after adjustment is very obvious. In manual mode, you can also adjust the color temperature of the whole picture to achieve the effect of "super blue moon".

Shooting skill

1, using a tripod

The camera must be mounted on a tripod to prevent the camera from shaking when shooting. Try to keep the camera close to the subject, and be careful not to introduce unnecessary shadows.

2. Focus orbit

Although it is not necessary for shooting, the focus track is a good auxiliary device, which can help you take good close-ups. The focal track can make the camera move along the X-axis and Y-axis in very small increments, and can accurately control the camera position and the depth of field of the picture. It is very troublesome to move the triangular bracket to the ideal position.

3. Use cable to release

Even if you have installed the camera on a tripod, if you press the shutter carelessly, the camera may still shake. Therefore, in order to avoid this situation, it is recommended to use cable release.