Traditional Culture Encyclopedia - Photography major - Tips for shooting close-ups of people in meetings: Mode selection (Shutter priority? Aperture priority?) F? Value, aperture value? etc! Who can teach me?

Tips for shooting close-ups of people in meetings: Mode selection (Shutter priority? Aperture priority?) F? Value, aperture value? etc! Who can teach me?

You can choose large aperture priority.

Meetings are usually held indoors, and the light is not particularly good. In addition, when taking close-ups of people, the blurred background can simplify the background and highlight the subject, so the maximum aperture value is generally used.

If the shutter is too slow, the subject may move, and handheld shooting will be difficult. If the shutter speed is not fast enough, increase the ISO.

The S5IS photoreceptor is only 1/2.5 inches, and the noise reduction capability of DIGIC III is not very high, so it is recommended not to use too high an ISO value. Try not to exceed ISO400. Sometimes a slight underexposure is acceptable, and it’s easy to brighten it up later.

If the lighting at the scene is very poor, increase it to ISO800. If the light is even worse, you can only consider using a flash. However, the flash index of this kind of camera is generally not particularly strong. It is only effective at a relatively close distance and tends to make photos stiff and dull.

As for the focal length, 80-135mm (equivalent focal length) is the best, without perspective distortion. Any longer would be fine. When taking close-ups at a meeting, it’s not easy to get in front of other people’s eyes.

Extended information:

Photography techniques:

1. Use a long focal length lens as the main shooting lens (approximately 250mm lens for 120-type camera, or approximately 135mm lens for 135-type camera), whichever has short depth of field function.

2. According to the principle of the portrait formula composition method, directly frame the composition of a close-up, half-body, three-quarter body or full body, about 5-8 steps away from the subject, and you can easily capture it.

3. When exposing, you need to open 1 to 2 more stops of aperture compensation according to the characteristics of portrait photography to make the face texture brighter. The soft and bright light on the person's face is the focus of taking this type of photo.

4. In order to create bright eyes, it is best to place a reflective board or white board in front of the portrait so that the eyes can reflect bright light points.

5. When printing, it is best to follow post-processing techniques and add soft focus processing to comprehensively soften the skin texture and achieve a soft and beautiful effect on the entire photo.

6. You should change the style or props of the subject characters more often. Otherwise, if you take a lot of photos, the visual focus will not change, and the shortcomings of similar composition, depth of field, and shooting techniques will be exposed.

7. Design the style of the theme portrait, choose a scene suitable for the overall performance, and do the preliminary theme and scene design work.

8. In daily life, you should cultivate your ability of aesthetic composition, and make a good overall composition plan between the subject portrait and the scene when shooting. You should not fall into the cliché of formulaic composition of portraits and take close-up photos.

9. Analyze and use the on-site lighting situation, use addition and subtraction methods to integrate the subject of the portrait to be photographed, and control the outstanding expression of lighting in the scene environment without falling into the common problem of flat lighting in general commemorative photos.

10. Control the length of the depth of field to create a moving and high-level depth of field expression, and don't fall into the messy pattern of ordinary life photos.

11. Choose the most appropriate photo opportunity to press the shutter, capture the vividness of the portrait and the artistic sense of the scene, and shoot a perfect portrait with a scene.

12. When taking this type of photo, the most important thing is the choice of film. As long as you use black and white film, you can print out the tone of this type of photo.

13. During the shooting process, you should pay attention to the color of the background and props, preferably gray, because too dark or too white backgrounds, props or costumes will cause the photos to appear all black or all white when they are printed. This is a Common sense about black and white photos. Only when the gray tone is appropriate, the single tone overprinted by color printing can have rich gradation expression.

14. When taking black and white photos, you can get beautiful tones by controlling the exposure correctly. It cannot be compared to the color negative film shooting method commonly used for portraits, which often uses two or more stops of exposure compensation. Only correct exposure can avoid the loss of saturated tones.

15. There is another type of film produced by ILFORD manufacturer on the market, which can be printed directly in color without having to go through the manual development process of black and white liquid. The shooting effect is the same, and it is a more convenient film.

16. The negatives that have been photographed and developed can be developed into pure black and white photos through the black and white development process. Or through the color printing process, a single-tone photo can be developed.

Baidu Encyclopedia - Photography Skills