How to shoot a blockbuster with an underwater motion camera

Many photographers like underwater photography very much, but the requirements of underwater photography are higher than those of land photography, so professional underwater cameras are usually used. As an electronic product, underwater camera should be waterproof, such as turning on the switch button before launching. It is not difficult to use underwater camera, but if you want to make beautiful movies with underwater camera, you must master some shooting skills, such as bottom-up shooting, clever use of composition and manual shooting. Let's learn how to use an underwater camera. First, how to use the underwater camera?

As a special photography method, underwater photography not only requires special equipment, but also has strict requirements for cameras. Professional underwater cameras can take very beautiful underwater photos, so how to use underwater motion cameras? The following is an underwater camera tutorial:

1, before shooting in water

Carefully check whether the switch on the battery cover is turned off. When taking out the battery, please make sure that the battery box cover is facing down to prevent water droplets from flowing back into the battery box. Carefully wipe off impurities near the battery box with a clean towel or lens cloth. Clean up any small particles, such as sand and hair, on the sealing plastic strip.

It should be noted that the machine switch button should be turned on before launching, and water will enter the motherboard through the power switch button when it is turned on and off underwater.

2. Shoot in the water

Fasten the camera's floating wrist strap when entering the water, hold the plastic anti-slip area of the underwater camera when shooting, and then start shooting. Pay attention to the underwater mode, because most of the red light is filtered out by seawater, and the underwater mode can automatically supplement the red light, restore the color of the photo, and avoid the obvious blue color of the photo.

3. The shooting is over

After shooting, take the camera out of the water, ensure that the camera battery cover is closed, and then soak it in clean water for 20 minutes to dilute the salt in the seawater; Then take out the battery. When taking out the battery, be careful to ensure that the opening of the battery is facing down. After taking out the battery, let the opening of the battery box face down, air dry for a while and then close it.

Second, how to shoot a blockbuster with an underwater motion camera?

It is much more difficult to shoot with an underwater camera than on land. When shooting underwater, you need to use some shooting skills to improve the quality of the photos. The shooting skills of underwater cameras are as follows:

1, improve diving skills

If you want to take pictures with an underwater camera, the most basic thing is to improve your diving skills. How can you take good photos when you are floating up and down in the water with your camera? So if you don't master the neutral buoyancy, don't try to take pictures, practice your skills first. The top neutral buoyancy course is the best way to achieve this goal. Then dive more and practice more. Practice makes perfect.

2. Close to the theme.

It is much more difficult to shoot with an underwater camera than on land. Particles in water absorb light and color. If you are far away from the subject, the picture will be very unclear. If the lights are turned off by flashing, the suspended particles will become more obvious and make the picture messy.

Step 3 shoot from bottom to top

Most divers are used to looking at the beautiful underwater world from top to bottom or upward, but this perspective is not suitable for shooting underwater. When you try to shoot the subject from bottom to top, the shooting effect will be better.

4. Use light to restore the absorbed color.

Because water absorbs color, coral reefs look mostly blue and green, not as colorful as other people's photos. But if you bring a flashlight, it will restore the original color, so you need to use a flashlight or flash to restore these colors underwater, so that the underwater world you photographed is still colorful.

Step 5 shoot by hand

Although automatic shooting is very convenient, manual shooting is a wiser choice underwater. Manual shooting can freely adjust the aperture, shutter speed and flash according to your needs to create the desired effect.

Step 6 use composition skillfully

We can do without good equipment, but we can't do without good composition. Clever use of composition can also achieve the effect of highlighting the main body, such as the familiar golden section rule.

7. Selection of topics

When choosing a theme, we need to consider many questions, such as whether the theme I will choose is inaccessible. Is this subject I photographed interesting? When I approached it, was it still there? Is the background of this subject appropriate? Will I destroy the surrounding environment by shooting this theme?

8. patience

Whether on land or underwater, taking good photos requires a little more patience, patiently waiting for the most suitable opportunity, or carefully choosing the most suitable angle.

Step 9 be creative

Creative pictures are more eye-catching than formal ones, which depends on your imagination according to the situation at that time.