How to set camera parameters (aperture, shutter, Iso, white balance) to take good photos?

The three kinds of Jingzi you mentioned, I personally think.

It is best to set the aperture at F7- 1 1.

International Organization for Standardization (ISO)

In the case of sufficient light, it is small,

The smaller the number, the better.

If the light is not enough,

It is recommended not to be higher than 800.

Depending on whether there is noise, white balance,

It's just automatic,

Or the kind in tungsten lamp,

This later period is adjustable,

Moreover, the first two later periods cannot be adjusted.

If the light in the church room is dim,

You'd better adjust f to around 3.5,

Try to make sure the shutter is fast enough when shooting.

Otherwise, it will be blurred.

Flash should not be used.

Street view,

It's easier to shoot during the day,

Only in the case of strong light can you adjust the aperture to make the value larger or adjust the exposure compensation to a negative value.

If it's a night shot,

If you want to shoot well,

Be sure to use a shelf or put it on a flat surface and take pictures with your hands away from the camera every once in a while.

This value is generally greater than F 1 1.

, ISO80 or 100,

Shutter 1/20 to 15 seconds

The scenery is good,

If the light is good,

Around F9,

ISO 100

The shutter is kept above 1/80,

Generally speaking, the light is good,

It is estimated to be around 1/400.

Say shutter,

Generally, it is more appropriate to hold the shutter of 1/200, which is not very fuzzy, but also clear.

The main problem is,

The external environment is constantly changing, so the shutter needs to constantly change itself.

F value is small, which is more suitable for close shot or telephoto.

All parameters are not constant in a layer,

As long as different combinations are suitable, real scenes can be shot.

It's a good combination.

You can go.

Zhongguancun online (Zhongguanchun Online)

Zhongguancun forum under the lens,

See how they filmed it.

Easy to get started.