Traditional Culture Encyclopedia - Photography major - How to install the license plate?

How to install the license plate?

1. First of all, we need to prepare the license plate to be installed and the corresponding tools, including a riveting tool, a Phillips screwdriver, a package of license plate buckles, two small screws and two female screws.

2. Take out the socket and riveting tool, and first install the socket on the riveting tool, as shown in the figure.

3. Rivet the locating pin to the automobile bumper with a riveting tool, as shown in the figure, aiming at the two holes on the bumper.

4. Push hard to the middle, and then remove the riveting tool, so that the mortise will be riveted to the bumper.

5, take out the car license plate, first put the license plate straight by hand, and the left and right distances are as consistent as possible, so as to ensure symmetry and look beautiful.

6. Take out the Phillips screwdriver, install the license plate buckle, fix the license plate buckle on the four holes of the license plate with the Phillips screwdriver, and fix the license plate and bumper together.

7. Finally, take out the pins on the license plate buckle and press the four pins on the license plate buckle.

Extended data:

1. Installation location of license plate. The general installation position is in the center of the front and rear, but there are other differences between special models. For example, some off-road vehicles, some trucks with special structures. According to national standards: according to the driving direction of motor vehicles, the front number plate should be located in the middle or right of the front, and the rear number plate should be located in the middle or left of the rear.

For private cars, it is rarely installed in the wrong position, because vehicles have obvious installation positions.

2. License plate installation requirements. Special fixing device for motor vehicle number plate must be used, fully sealed and firmly installed. For example, your license plate starts with Guangdong A, and there is a steel seal of Guangdong A on the solid seal. There are some on the market, but they are all fakes. I suggest you buy it at the DMV. The price is similar, but it's a bit troublesome.