How to paste the wall of the background wall in wall covering How to paste the wall of the background wall in wall covering?

1. First, you need to measure the size of the background wall, and then record it. You can buy wall covering online or in a physical store. Pay attention to the size to leave room for processing. It's too short. No, it's not pretty.

2. The wall pasted with wall covering should be treated first. If the wall is just finished with cement paint, it can be operated when it is dry. If it is an ordinary wall, you need to make a basement membrane first.

3. Pour the glue into the bucket, then put it in with a roller and soak it. Take it out in a few minutes, and roll it back and forth on the wall where you want to post it until it is covered with glue.

4. unfold the purchased wall covering, then stand on the ladder chair and stick wall covering diagonally. Pay attention to the smoothness of the post, not the high side and the low side.

5. Press wall covering with your hand, and then scrape wall covering flat with a scraper. When scraping corners, you should pay attention to leveling them hard, and don't have wrinkles or corners.

6. After the wall covering is scraped, it should be trimmed with a sharp blade, and the wire hole should also be cut with the blade. After trimming, scrape it again with a scraper.

7. Cut the wallpaper of the border and post it according to the same steps. After posting, wipe it with a cloth to prevent the glue from sticking. Check the posting effect and close the window.