SecuFirst smart home monitoring package: you can have a smart home solution without spending a lot of money.

I have shared many home monitoring devices with you before, and each product has different positioning and requirements. What the experts want to share with you this time is the home monitoring equipment SECU FIRST SHC-GA11smart home monitoring suite, which is more suitable for urban families or singles.

Usually, "monitoring" is the main core function of home monitoring equipment, but due to the change of lifestyle, in addition to passive monitoring function, we also need some active intelligent mechanisms to help all kinds of things in life. Secufirst SHC-ga11Smart Home Monitoring Suite provides a suite suitable for home use, which allows you to monitor, control and even interact with people or appliances in your home through your mobile phone, not only to protect yourself, but also to protect your family.

SecuFirst SHC-ga11Introduction to Smart Home Monitoring Package Secufirst is not a single product, but a monitoring package designed for ordinary small families or rooms.

The combined suit includes the main machine (SHC-GW 1R), wireless intelligent power socket (SHC-OA 1S), wireless door magnetic induction burglar alarm (SHC-MA 1S) and multi-function remote controller (SHC-RA 1S), which is convenient for operation.

There is also a complete manual in the combination package. You can complete the installation step by step according to the instructions in the manual. The installation is really simple, and there is no relevant background!

All peripheral devices will be controlled by the monitoring host (SHC-GW 1R), so it is necessary to place the host in a space with less interference during installation.

In addition to the devices attached to the combination package, the host can control more compatible devices (just set them through the APP).

Smart plug (SHC-MA 1S) allows you to switch on and off home appliances from a remote location through your mobile phone. For example, if you want to turn off the standby TV and stereo combination at home after going out, you can turn off the power by just turning off a button on your mobile phone, thus saving the standby electricity bill.

In addition, smart plug can also be used as a repeater to extend the signal to a farther and wider corner.

Using a three-hole connector with a grounding wire may not be so convenient for most families in Taiwan Province Province. If you don't want to break your foot cruelly, you can buy an adapter instead. But I still hope that the original factory can directly launch a two-hole version, so much the better.

In addition, the smart plug can provide loads as high as 1800W, which can be used for general household TV, hair dryer and audio equipment (please don't plug in more high-power appliances).

Door magnetic sensors (SHC-OA 1S) are a group of two, which can be installed on the main doors or windows at home to detect the opening and closing state of doors and windows. If the doors and windows at home are open or forgotten to close, you can know through the sensor.

Multi-function remote controller (SHC-RA 1S) provides a convenient and quick way to use. You can set and remove the security status through the remote control, find abnormal situations, and you can also start "all-area video recording" with one button, so that there is nowhere to hide at night.

Install the smart home monitoring package 1. Of course, the first step in installing the host is to connect the host to the power supply and network routing! In order to ensure the stability of the connection, the host must use network routing to connect with the IP sharer at home to avoid the security vulnerability caused by wireless network disconnection.

Generally speaking, at this time, the monitoring host has automatically completed the networking action without additional settings.

Step two. Install the OMGuard SHC application (download and install the OMGuard SHC application

All the settings and functions of this home monitoring package can be completed through the smartphone APP, so you must download the "OMI Guardian SHC APP" first.

Download OMGuard SHC application: Android | iOS

Step three. Match the monitoring host.

Pairing the monitoring host is also very simple. First, connect the mobile phone to the Wifi wireless network at home to search, and generally you will find the monitoring host directly (if you don't find it for the first time, repeat the search).

If you successfully search for your monitoring host, the screen will automatically display the system DID. You only need to enter the system name and security code (see the user manual) to complete the pairing.

Unfortunately, it doesn't matter if you can't find it automatically Turn over your monitoring host, and the bottom label will tell you the system DID number. You can also enter it manually!

It is strongly recommended that you modify the default security code in the "Settings" function immediately after the pairing is completed to avoid being cracked and peeped! !

2. Install the door magnetic sensor. The door magnetic sensor can be installed on a window or a door. As long as someone opens the doors and windows, it will trigger a reaction. It is a common sensor in safety equipment.

Step 1. Before installing the door magnetic sensor, remember to push open the cover and install the attached mercury battery.

Step two. Stick the attached double-sided adhesive tape to the back of the sensor. Note: Don't tear off the red glue yet.

Step three. Because the distance between the two sides of the door magnetic sensor is limited, stick one side first, and the other side needs to be tested repeatedly within the sensing distance (it will flash blue when moving away or approaching) before tearing off the adhesive and sticking it.

Step four. After the installation is completed, you can try to open and close the doors and windows for testing. If the blue light on the sensor flashes, it means that the state of doors and windows has changed, and a signal is sent to the monitoring host. So you're finished!

Step five. Next, we will go to SHC Omegaard to match the door magnetic sensor.

Click the+in the upper right corner of OMGuard SHC and select "Door Magnetic Alarm".

Step six. Press the button on the right to start the pairing search. After searching, enter the name and location to complete the pairing of the door magnetic sensor.

3. Use a multi-function remote control If there are people who are not familiar with technology products at home, or don't want to open the APP every time, you can also do some basic quick operations through the remote control. The multifunctional remote controller can provide "setting alarm", "disarming alarm", "shooting the whole area" and "emergency call for help".

When "Set Alarm" is pressed, the monitoring host will give a long sound and enter the alarm mode after 30 seconds; Press "set alarm" to cancel the alarm, usually in front of the house (otherwise there will be a harsh alarm to greet you); "All-area photography" can be set to start all cameras in the warning area at the same time and shoot every corner.

4. There are many ways to use smart plug and smart plug! You can use it for power saving purposes, or use it with other sensors.

The matching method is also very simple. Just follow the steps in the APP to complete the pairing, and then just plug in the appliance and you can start using it.

PS: Only suitable for mechanical switch, electronic switch can't be used with smart plug!

Through the indoor camera, monitoring and interaction can be connected in this combination package. The most important thing is this indoor wireless network camera (WS-M0 1S). It has built-in five infrared LED lights, and the night vision distance at night is 5 meters. At the same time, there are two detection technologies, namely "human body temperature sensing" and "motion detection", which can automatically excite videos when objects move and send them to mobile phones or tablet computers.

The white circle above the lens is a temperature sensor, and the led lights around the lens are infrared LEDs when the night vision function is turned on.

You can connect through the Internet or wireless network.

There is a memory card slot in the lower left corner. To use the video recording function, you must insert the Micro SD memory card here.

I don't need to go into details about the matching method. WS-M0 1S provides a horizontal viewing angle of 80 degrees and a vertical viewing angle of 45 degrees. After pairing, you can find perfect angle and repair it through OMGuard SHC.

The camera WS-M0 1S can provide a photographic picture with the highest resolution of 1280*720 (HD). Compared with the monitor with the picture quality of 640*480 (VGA), the captured image will be clearer and more recognizable.

Enlarge the above picture to 100%, and you can even vaguely see the words on the outer box of "snsv" at the back.

As mentioned earlier, WS-M0 1S has night vision function and five infrared LEDs, which can clearly see objects within 5 meters. According to the picture below, the distance from the camera to the door of the captain's cabin is about 6 meters. Under the irradiation of WS-M0 1S infrared LED, you can still clearly see the dynamics of the door.

Enlarging the above picture to 100%, although the picture is not as clear as the general brightness photography, it can clearly identify people's characteristics and behaviors.

The human body turns on the light automatically, and it is not afraid of the dark when getting up at night. Since it is called "smart home", devices and apps must of course be linked. There is a "situation" function in OMGuard SHC application, which a good player thinks is very practical. You can set that when sensor A is triggered, other devices will also act together.

Don't you know what that means? Have you seen Stephen Chow's movies? After stepping on the mysterious organ by mistake, stones, arrows behind them and flying knives fly from all directions ... This is the concept, but the difference is that this combination will not kill you XD. So you can set different situations to use according to the situation at home.

You can find the "Scene" option in the function options under the OMGuard SHC application.

In the setting screen of "Scenes", the number of scenes that can be set will be displayed according to the currently paired devices, so as to use the door magnetic sensor, motion sensor and camera according to the current usage of hands. You can click on any sensor (trigger device) to edit the corresponding startup device.

In this setting, the expert needs to set the situation that "the toilet automatically turns on the light in the middle of the night to avoid hitting the wall", so I first connect the floor lamp in the room to the smart plug, and set the "motion sensor" in the APP to detect the movement:

1. Open smart plug. 2. Camera recording &; Automatically open OMGuard SHC to view the scene.

Press the Save button on the right to finish the setting.

Next, let's see the effect! Experts set up a camera beside them to shoot the operation of the whole system, and at the same time, because the camera recording function is also turned on, let's compare and see it together! As can be seen from the film, after passing through the sensor for about 1 sec, the smart plug is turned on (the room light is on) and the camera starts to work.

This setting can be used when elders or children wake up to go to the toilet at night, and actively detect and turn on the lighting to prevent injuries or falls.

[embedded content]

The other picture was taken synchronously by the camera. The starting time of shooting is slower than opening smart plug, but it is reasonable in this application.

In the part of the film, because the player chooses HD video, the number of frames will be less. If you choose VGA video, you can improve the smooth picture to 25 frames per second (25fps), depending on your personal choice.

[embedded content]

In fact, there are many application scenarios of this setting, such as: monitoring of dead corners around the home, deterrence (cameras are not waterproof, so be careful), monitoring of important areas of warehouses/offices, and so on.

With the door magnetic sensor, all entrances and exits can be recorded. In addition to the mobile sensor, it can also be used with the door magnetic sensor to record the access control record of each door opening and closing.

[embedded content]

Finally, the most important things in the whole scheme are "monitoring" and "alarm". Okay, just open the door after you set the alarm clock. Of course, the alarm went off and the camera started to synchronize the video. The APP on the mobile phone will also be notified continuously, and you can see the timely situation of the room when you open it.

[embedded content]

According to the evaluation experience, similar products on the market are very diverse, and the products or combination schemes launched by each manufacturer are different. For the SHC-GA 1 1 smart home monitoring package evaluated by this expert, the accessories included are quite suitable for small apartments in metropolitan areas, and the design style of SecuFirst products is always simple and easy to set, which greatly improves the practicability of this package.

The most important feature of this series of products lies in the "situation" mode designed in OMGuard SHC APP, which can be matched with different sensors and monitoring equipment to meet different needs according to different usage situations. But the fly in the ointment is that there is no way to set the start/end time of the scene mode (for example, there is no need to turn on the light automatically during the day), and it is still necessary to switch manually during use to avoid unnecessary triggering.

In addition, the scalability of the monitoring host is not bad. If there are not enough accessories in the combination bag, you can also buy and sell the expanded equipment yourself. At most, you can use 24 sets of sensors +4 webcams, which is very enough for ordinary families.

For products with similar product combinations on the market at present, the monthly rental fee of several hundred to several thousand yuan a month is not a small expense, but the SHC-GA 1 1 Smart Home Monitoring Package allows consumers to own products with the same quality for less than 7,000 yuan without being tied up (laughs). Is this a good deal?

Product information and purchase