What is a Carl Liang camera?

Kirlian camera is a new technology with far-reaching influence in biology, bionics, genetics, space physiology and other fields. This kind of camera is used for scientific research.

Carl Liang Xiang; The principle of camera phase formation was first discovered by Xie Miao Davidovich Kirian, a scientist in the former Soviet Union. This camera can shoot invisible energy fields that are invisible to the naked eye. It can shoot some wonderful phenomena, such as shooting a leaf with a third cut off, but it can show a complete image of the leaf. The reason is that the energy field of leaves has not been cut off.

Through Carl Liang's camera, people find that people with different personality characteristics emit different human aura, that is to say, people's consciousness determines the state of their own energy field.

Extended data:

Shooting should be done in a dark place, in a dark room or in the moonlight, so as to get better results.

In order to capture corona discharge, long exposure is needed. So the camera should be fixed with a tripod, and then the objects and metal parts should be placed directly below. When you are ready, shoot as follows:

1, put the background first, the black background works best, so put a piece of black paper or a black heat shield. Must be non-conductive.

2. Put away the sample to be photographed again. If it is an inanimate substance, it should be grounded, such as a leaf or a coin. Organisms, such as human body, animals, living whole plants, etc. , no grounding is required. In order to achieve the best effect, a small hole can be made in the center of the black background, one end of the high-voltage line is grounded, the other end is stripped of insulation, and an object is placed on the back of the background to ensure good contact between the two.

3. Connect the high-voltage line of the high-voltage power supply to the transparent discharge board, and then put the discharge board on the object.

4. Move the camera so that the subject is in the picture and focus manually. And reduce the aperture number as much as possible. And set the shutter at 15 seconds or more.

5. Connect the high voltage power supply and adjust the frequency to provide the strongest discharge. Press the shutter and let the power supply discharge continuously.

6. Evaluate photos. If it is too white, increase the aperture number and reduce the exposure time; If it is too blurred, reduce the aperture number and extend the exposure time.

Baidu encyclopedia-Qiliang photography