Summary of safety work in "necessary" departments (6 general remarks)

Department safety work summary 1 Dear leading comrades,

Hello everyone!

Time flies, and it's a new year in a blink of an eye. Looking back on this year's work process, under the leadership of the Party Group of Beijing Branch, with the full support and cooperation of all comrades, I have successfully completed all the tasks I am responsible for according to the working ideas, goals and tasks of organizations at all levels, based on my own work, hard work and forge ahead. As we bid farewell to the old year and welcome the new, we will summarize the main work of the past year as follows:

First, since joining the company, I have actively integrated into the branch and quickly learned about the operation and current situation of the branch. At the same time, take the time to learn your own forging knowledge, from safety management regulations to safe and civilized construction management, which affects the important nodes of engineering safety.

In engineering, I have repeatedly expounded the concept of strengthening safety awareness and safety system responsibility with the knowledge of safety culture and safety prevention skills of "safety alarm". Organize and carry out "the understanding and concept of safety knowledge" and "I want to be safe; I will be safe; I know safety; Put an end to accidents caused by human responsibility. Safety in production is related to the safety of workers' lives, the safety of enterprises' property and social stability. Only by doing a good job in safety production and strictly implementing the policy of "safety first, prevention first". Make all employees firmly establish safety awareness, do a good job in safety and ensure the normal operation of safety production.

1. Inspection of each project department;

Check the safety and civilized construction of each project department regularly every week, and resolutely give a warning or a fine to the safety construction site that does not meet the safety requirements. Due to the correct and strict management of project safety management personnel and the correct education of labor force, there is no case all year round.

2. Report the safety management information of the company and the group;

Safety management information is the focus of safety work. I insist on browsing and implementing the documents issued by the group in OA every day, and focus on checking some habitual management information, and report the problems found in the information that is difficult to reply in the safety information inspection to the center leaders in time.

Second, the special safety inspection.

The security department stipulates every week. First, the standardized management inspection day for safety and civilized construction rectification. Arrange the project department to set up a safety inspection team headed by the manager and safety supervisor. Every Monday, the inspection team will thoroughly inspect the site safety and civilized construction, data standardization and other aspects of the construction site, dormitory and other places, and immediately rectify the problems found on the site and make them in writing.

Summarize what our department staff did today every day, record the unfinished or unfinished things, arrange the department staff to continue their efforts the next day, and report the rectification to the relevant person in charge in time to prevent the inefficiency of the department.

Department safety work summary 2 1, according to the contents of the responsibility book, the leaders of our unit put safety work on the important agenda, and the general manager takes safety as a main task every time he deals with the trade union, so that all safety management measures are planned, deployed, supervised, implemented and inspected together.

2. It is very important to ensure safety and improve safety awareness, self-defense and self-rescue ability, and doing safety education well is the basis of enterprise safety work. We often go deep into the production line to educate employees about safety, especially when loading, burning and discharging kilns. The accident rate has been reduced and good results have been achieved.

3. Conduct regular and irregular safety self-inspection every month, and make on-site rectification in time when problems are found, so as to nip potential accidents in the bud and ensure the smooth progress of enterprise safety production.

4. Strengthen traffic safety management, effectively prevent traffic accidents, conduct continuous training and study on drivers' safety regulations and traffic road regulations, improve their safety awareness and professional level, and formulate corresponding vehicle management systems. Drivers are prohibited from driving under the influence of alcohol and fatigue, and the driving approval procedures are strictly implemented, so as to rationally arrange the use of vehicles and improve the efficiency of vehicle use. Through a series of safety work, no traffic accidents occurred throughout the year.

Summary of departmental safety work 3. Summary of safety production work in the first half of the year

In the first half of 20xx, the cold rolling operation department earnestly implemented the company's instructions on strengthening safety production, closely organized the work around the production and operation tasks of the cold rolling operation department, adhered to the safety production policy of "safety first, prevention first and comprehensive management", put safety production at the top of all work, and actively carried out various safety management work in view of unsafe behaviors of people, unsafe conditions of materials, defects in working environment and management defects. The safety work of the cold rolling operation department in the first half of this year is summarized as follows:

(a), to further implement the responsibility system for production safety.

In order to seriously implement the responsibility for safety production at all levels and improve the workers' sense of responsibility for safety production, the cold rolling department signed the responsibility certificate for safety production step by step at the beginning of the year according to the company's requirements. Through the signing activities, leaders at all levels and employees realized the importance of safe production. Signing the responsibility book is not only a form, but also a clear responsibility for production safety. In this signing activity, the Ministry signed 8 letters of responsibility with the branch factory (division level and project team), 22 letters of responsibility between the branch factory (division level unit) and the operation area (project team), and 78 letters of responsibility were signed at the team level. Management post responsibility book signing: 204 * * *, employee responsibility book signing: 978 * * *. In June, the company issued the Safety Production Responsibility System of Shougang Jingtang Iron and Steel Co., Ltd. (Second Edition), and the operation department further refined it according to the company's requirements, and implemented the safety management responsibility to each post according to the principle of "horizontal to the edge and vertical to the end". This responsibility system was promulgated and implemented in July.

(2) Strengthen the safety education and training for employees, and constantly improve their safety awareness.

In the first half of 20xx, the department and the branch factory organized safety education and training for post employees to enhance the safety awareness of front-line production employees; Organize all kinds of safety training according to the post characteristics, and continuously improve the safety quality and safety skills of employees through effective safety education and training. By carrying out safety training for all employees, all employees will firmly establish the idea of "safety first, prevention first", put safety work first in all work, master the technical skills of safety production, generally improve people's safety quality, advocate people-oriented safety management, and lay a good foundation for doing all safety work well. Before the Spring Festival, the cold rolling operation department organized all employees to carry out an employee safety training and education activity, focusing on key positions, key parts, key personnel, special jobs, outsourcing workers and other positions to ensure that the education work was in place in time and the safety work was implemented during the "two festivals". Pre-holiday safety education ***985 people were trained and tested. During the safety month, the operation department will distribute the training papers on the safety management system of the cold rolling operation department. On the basis of organizing the shift staff to study the company's eight system safety training activities in the early stage, more than 1300 employees took the training examination. Since the beginning of this year, 28 regular workers and 304 cooperative workers who have newly entered the factory have received three-level safety education and training, and established safety education files for them.

(3) Carry out in-depth investigation of hidden dangers, intensify rectification of hidden dangers, and create a good safety production environment.

Combined with the requirements of the company's winter safety inspection, Shougang Jingtang Iron and Steel Co., Ltd.' s deepening safety production rectification work plan and Shougang Jingtang Company's 20xx "Safety Production Month" work plan, the cold rolling operation department organized 24 professional safety inspections, 2 seasonal safety inspections and 4 pre-holiday safety inspections, and * * * found out potential safety hazards on site 148. At the same time, each branch also organizes its own safety inspection once a week according to the requirements of the Ministry, and the safety inspection is organized once a day in the operation area and once a shift in each shift. Timely correct the unsafe behaviors of people found in the inspection, deal with all kinds of illegal behaviors, and conduct assessment in accordance with relevant regulations. At the same time, the workers who violate the rules are educated in safety thought, so that the workers themselves can establish the idea of safety first and fundamentally put an end to their unsafe behavior.

(4), earnestly do a good job in team safety management.

Team is the smallest unit of enterprise management, and the safety management of team is the basis of safety management of operation department. In order to strengthen team safety management, the cold rolling operation department issued team safety management measures to each team according to the requirements of the company and department leaders, and organized employees to study hard. At the same time, leaders at all levels and safety professional departments are required to strengthen the safety inspection and assessment of the team and urge the team to do a good job in safety management. Each team shall carry out safety team activities on time, carefully carry out safety activities according to the requirements and arrangements of weekly safety activity plan of cold rolling operation department, and record the activities, information inside and outside the company, leadership requirements, team discussion speeches, etc. In the activity record of the security team.

(5) Strengthen occupational health management.

Some jobs on every production line in our department are dangerous jobs. According to the relevant requirements of occupational health management, customize corresponding warning signs and post them on the site to remind employees to pay attention to protection, equip employees working in dangerous positions with corresponding labor protection articles, and implement health care expenses. At the same time, establish employee occupational health monitoring files, conduct occupational health examination for employees engaged in toxic and harmful operations every year, and archive employee physical examination data to ensure that the overall data of employees from entering the factory to retirement is complete and true, in line with national occupational health monitoring file management standards. In May this year, 3 16 employees engaged in toxic operations participated in the occupational health examination.

(6) Organize all units to do a good job in the safety production month activities of the cold rolling operation department.

After the Operation Department received the notice issued by the company to carry out safety month activities, the leaders of the Cold Rolling Operation Department organized a safety month mobilization meeting, studied and formulated the safety month activities plan of the Cold Rolling Department and distributed it to all branches and offices, and widely mobilized all employees to carry out safety month activities in depth. During the safety month, the operation department hung more than 20 safety publicity banners and posted a safety knowledge publicity wall chart 15. Each unit uses the time of safety activities to learn accident cases, and conducts safety production discussion activities according to Selected Safety Accident Cases issued by the Operation Department. Organize post emergency simulation drills, so that employees can master the main points of post emergency plan. The ministerial level organized emergency rescue plan drills 1 time, the branch factories and project-level units organized drills 1 time, the operation level organized drills twice, and 69 teams organized desktop plan deduction. Organize to watch the company-level emergency rescue plan performance 1 time, and the cold rolling operation department 10 people participated. According to the propaganda requirements of "Safety Production Month". On June 22nd, 52 employees of No.1 Cold Rolling Plant visited the "Safety Production Month" safety picture publicity exhibition held by the company, with 10,000 signatures. By watching the safety publicity exhibition and the safety accident case exhibition, the workers learned the concept of safety production, accident prevention methods, hidden danger investigation and other knowledge, greatly improved the workers' awareness of safety production, and received good safety education results.

(seven) continue to do a good job in the occupational health and safety management system and safety production standardization.

In April this year, the company organized an internal audit of occupational health and safety management system certification. Under the guidance of the company's safety professional department, the cold rolling operation department organized all branches and operation areas to carry out training on the relevant contents of the occupational health and safety management system, further approved and revised the hazard identification risk evaluation form formulated last year, and at the same time formulated the 20xx occupational health and safety management objectives of the cold rolling operation department according to the company's requirements, and ensured the safety in production by implementing various hazard control measures.

According to the requirements of the company, the cold rolling operation department started the establishment of safety production standardization in March, formulated the plan and arrangement for the establishment of safety production standardization in the cold rolling operation department, set up a leading group for safety production standardization, defined the responsibilities of leaders at all levels and professional supervisors, and divided the responsibilities into operation areas, teams and individuals. At the same time, the establishment of safety production standardization will be included in the monthly safety professional work plan, summary and assessment. Through the establishment of safety standardization, the basic management of safety production at all levels has been strengthened, the consciousness of employees to implement operating procedures has been improved, and the standardization of management accounts, operating procedures and behaviors has been realized, laying a solid foundation for the establishment of "three highs and four first-class" enterprises.

(eight), strengthen the management of foreign cooperation units, and create a safe and harmonious production atmosphere.

Strengthening the management of outsourcing units is a necessary means for our company to ensure safe production. In accordance with the principle of "whoever uses the labor is responsible", the cold rolling operation department manages all cooperative units in accordance with the Measures for the Administration of Safety in Production of Social Cooperation Projects of Shougang Jingtang Company issued by the company, and signed a safety agreement at the beginning of the year; Provide the cooperative unit with the company's safety management system and measures; Supervise and guide the cooperative units to improve the safety management system, establish and improve various safety production management systems, supervise the outsourcing units to carry out safety training and education, and improve the safety awareness of the employees of the outsourcing units.

Second, the second half of the production safety work plan

1, do a good job of heatstroke prevention and cooling in summer and electric shock prevention in rainy season. According to the company's 20xx annual heatstroke prevention and cooling plan, comprehensively check the heatstroke prevention and cooling work, take the "unsafe behavior of people and unsafe state of things" as the starting point, eliminate all hidden dangers of accidents through strict management and inspection, create conditions for safe production, and ensure safe production during high temperature in summer with practical actions. In accordance with the spirit of Notice of Cold Rolling Operation Department on Doing a Good Job of 20xx Electric Shock Prevention Inspection, we will comprehensively organize and carry out electricity safety inspection.

2. Continue to organize the related work of occupational safety and health management system certification and safety production standardization. Through continuous improvement, we will effectively strengthen the management of production safety and ensure the continuous improvement of the level of safety management. According to the unified planning of the company, we will do these two tasks comprehensively, seriously and meticulously.

3, seriously organize the implementation of the responsibility system for production safety. .

In view of the safety production responsibility system issued by the operation department, the branch factories and operation areas are organized to study and implement it, and the personnel in each post are required to memorize their own safety responsibilities, eliminate all kinds of unsafe factors in the production process, and provide guarantee for the safety production of the cold rolling operation department.

4, the implementation of metallurgical safety production to deepen the rectification work, to carry out the training of team leader, team safety officer, post personnel. According to the training plan, do a good job in training team leaders and safety officers to master their own safety production responsibilities and how to carry out team safety management. The training of post personnel should closely focus on the eight systems of the team and do a good job of implementation.

5. Strengthen the safety management of maintenance inspection units. Carefully analyze the safety management of maintenance and testing units within the scope of this unit, and carefully analyze the existing problems from the aspects of management status, personnel composition, rules and regulations, professional ledger records, personnel quality and so on. , and provide targeted guidance. Based on the principle that whoever employs is responsible, we will earnestly strengthen the safety management of maintenance units to prevent all kinds of accidents.

6. Do a good job in the safety organization of daily maintenance, pay special attention to the inspection of the formulation of temporary safety measures for maintenance, strengthen the inspection of "unsafe behavior of people and unsafe state of things" at the maintenance site, and nip hidden dangers in the bud.

7. According to the company's emergency plan revision requirements, organize each branch factory and operation area to revise the comprehensive plan, special plan and on-site disposal plan of the cold rolling operation department. After the approval, release and implementation of this plan, employees will be organized to carry out emergency rescue training and emergency rescue drills to verify the applicability of the emergency rescue plan and improve the emergency rescue response ability of employees.

Department safety work summary 4 The company's profit is very important, but what is more important than profit is the safety work of a company, which is also an important work item related to every staff member of the company, as well as various facilities and equipment of the company and related projects of the company.

If a company's safety work is not done well, it is difficult to do other work well. Safety work is the most important guarantee for other work. We often encounter or hear about safety problems in the company, so it is necessary to implement the safety work of the company. In the safety work of our company this year, we have redeployed this part of the work to make our company's safety barrier stronger.

In the cultivation of safety thoughts, we ask the personnel department of our company to organize several safety awareness trainings this year, just to improve everyone's safety awareness in our company. After each training, we will evaluate the safety knowledge of the trained employees. If employees fail to pass the assessment, they will have to attend the safety training again.

Although the response of this safety training activity among employees is not very good, I think it is very important to carry out this safety training, because improving the safety awareness of employees in our company is the most effective way to prevent major safety problems in our company. We will also post corresponding safety warning slogans in all the places where the company is prone to danger, so that the employees of the company can always remember the safety problems that are prone to occur, and at the same time improve their vigilance against the occurrence of dangers. In the month when the company implemented these measures, the small safety problems that the company would have before were reduced a lot.

Among the company's safety precautions, our company has newly purchased a batch of fire-fighting equipment, which has improved or eliminated some facilities and equipment with potential safety hazards. Fire is the focus of our safety work every year, and it is also a safety problem that is easy to happen in the company and will cause the greatest loss to the company. Therefore, the improvement and replacement of fire-fighting equipment is also an effective way to reduce the occurrence of fire in the company. At the same time, our company will actively accept the fire brigade's inspection of our company's fire equipment and fire safety knowledge as scheduled. This year, our company replaced a number of old facilities and equipment prone to safety accidents, and re-purchased work equipment and facilities with high safety factor, which added a guarantee for the office safety of employees.

Regarding the training of employees' safety escape skills, our company held several safety accident drills this year. During the drill, we hired relevant experts to explain to us different escape methods and safety skills in various dangerous situations, and let our employees operate and drill in person on the spot to ensure that our employees have certain self-protection and self-help ability when the company encounters safety problems.

In a word, in this year, the safety work of our company has reached our expected requirements, and we will do our safety work better and protect the employees of the whole company.

Summary of departmental safety work in 20xx years, the company adhered to the safety policy of "safety first, prevention first", conscientiously implemented the spirit of the documents on safety production of the Economic Development Zone Management Committee and the group company, strengthened safety management, continued to pay special attention to the construction and implementation of the most basic safety management rules and regulations, established and improved the safety guarantee system, and implemented the safety management responsibility system layer by layer. Now, briefly review the safety work. I. Review of Major Safety Achievements in 20xx

1. Implement the safety document requirements of the Economic Development Zone Management Committee and the Group Company.

After receiving the safety documents from the Economic Development Zone Management Committee and the group company, the company designated the planning department to organize and implement the spirit of the requirements of each document. We have successively implemented the Group's Notice on Carrying out Special Fire Safety Inspection, the Notice of Xi Safety Supervision Bureau on Strengthening and Standardizing the Management of Emergency Plans for Production Safety Accidents in the City, the Notice of the Group on Carrying out Assessment of Safety Production Standards, and the Notice of the Group on Forwarding the Management Committee of Economic Development Zone on Doing a Good Job in Flood Control in 20xx. The Group organized various project departments and industrial service centers to carry out safety inspection activities to eliminate various potential safety hazards, such as the Notice on Printing and Distributing the Activity Plan of "Safe Production Month" in 20xx, the Notice of Xi 'an Economic Development Group on Doing a Good Job in "Double Festival" Safety Production and the Notice on Strengthening the Safety Management of Gas and Special Equipment. The Planning Department investigates major safety issues, such as deep foundation pits, aerial work, installation of external frames, installation and disassembly of large-scale mechanical equipment, safe use of electricity, fire prevention and other general safety issues. Under the work of Qi Li, a multi-department company, there was no serious injury and various safety accidents of more than 50,000 yuan caused by our company in the whole year of 20xx. 2. Establish and improve the safety management system.

In view of the nonstandard safety management system of real estate development enterprises, the company arranged the planning department to draw up the document "Occupational Health and Safety Management System" according to the national GB/T2800 1 and the actual situation of economic development. It covers safety system documents such as identification of safety production laws and regulations, control of safety nonconformities, correction and prevention, emergency preparation and response control, accident investigation report and handling, and safety record control. The emergency plan drill system of each production management department has been established, which makes the company's safety management more standardized, the system more perfect and the accident prevention and control more effective. 3. Daily safety management

The project department organizes the safety management personnel of the supervision company and the construction party to conduct joint safety inspection every week, and the industrial service center conducts supervision and inspection on the safety situation of the production areas of enterprises in the industrial park every week, and agrees with the responsible party on the rectification measures and rectification period for the problems found. Each project department and industrial service center hold a special safety meeting every quarter to summarize the development of safety work this quarter, existing problems and the next improvement measures. 4. Training and education

The planning department organized 7 safety supervisors from the project department, industrial service center and property management company to participate in the safety officer training organized by the Safety Supervision Bureau of the Economic Development Zone, and arranged 22 main safety management personnel of the company to participate in the firefighter training organized by the Xi City Fire Brigade. Moreover, the employees who participated in the safety training arranged and organized safety training for other employees in the department, and taught relevant safety knowledge and safety protection skills.

5, safety emergency plan scheme exercise

According to the requirements of the Notice of Xi Safety Supervision Bureau on Strengthening and Standardizing the Management of Emergency Plans for Production Safety Accidents in the City forwarded by the Safety Supervision Bureau of Economic Development Zone, the Planning Department supervised and organized the project department, the property management company and the general office to organize fire drills, mechanical injury emergency drills, emergency escape drills and ***4 emergency plan drills, which verified the effectiveness, suitability and sufficiency of the emergency plan. Second, the existing problems

1, the layout of the construction site is unreasonable, which increases the difficulty of safety management.

In order to save costs, the construction unit does not want to invest more in the public area and the intersection area of the operation section, and it is not easy to compromise, which will cause security risks.

2, individual construction units safety management is not enough, there is luck.

The lack of experience of safety management personnel in individual construction units and insufficient investment in safety facilities and equipment have caused potential safety hazards. Iii. Improvement measures taken 1, plan well and strengthen the contract.

1) For the project with multiple blocks developed and constructed at the same time and constructed by stages, Party A shall plan as early as possible, reasonably divide the blocks, and stipulate in the tender documents that the construction unit will increase investment.

2) After the construction unit enters the site, it is necessary to submit the general plan to Party A for examination and approval, and the site operation can only be carried out after it is reviewed by the supervision company and Party A's professional and technical personnel ... 2. Supervise the implementation of laws and regulations and strengthen management.

Strengthen the safety management in the construction process, implement the relevant national safety laws and regulations, implement the notification regulations of the municipal, district and group safety authorities and the requirements of the company's occupational health and safety management system, so as to conduct regular inspections, record problems during inspections, rectify and reply if there are problems, and nip potential safety hazards in the bud. 3. Strengthen safety publicity, education and supervision. The general contractor shall conscientiously do a good job in the three-level safety education for workers and shall not resort to deceit. At the same time, the general contractor is required to conduct emergency drills, so that workers can participate in learning basic safety protection knowledge and skills.

20xx is a year full of opportunities and challenges. The newly started area of the company will continue to increase, and the economic benefits will be improved. But at the same time, all projects are in the main construction stage, with many potential safety hazards, strong randomness and great management difficulty, which requires high management and personnel quality of Party A, the construction party and the supervision company. But we have the determination, confidence and ability to manage the safety production of the construction company and hand in a satisfactory answer sheet to the group company.

Department safety work summary 6 According to the 20xx work plan made at the beginning of the year: guided by the safety production management policy of enhancing safety awareness, strengthening safety education, vigorously implementing various safety systems, strengthening various safety inspections, eliminating all kinds of potential safety hazards and ensuring safety production, we should start with each monitor, do a good job in safety education in the form of the monitor driving the class members, focus on typical accidents in previous units, do a good job in safety production, do a good job in safety inspection, and concentrate on governance to eliminate all kinds of potential safety hazards and ensure safety. I carried out the plan carefully. Through the practical implementation of the company's safety production management policy, my own efforts and practical work, as well as the active cooperation and efforts of the workshop monitor and employees, the accident rate was ensured to be zero and the annual safety production goal was achieved under the condition that the output and benefit were greatly improved compared with the same period of last year. The annual work is summarized as follows:

First, strengthen the assessment of safety wages and standardize daily production behavior.

Linking safety work with bonuses and imposing certain penalties on workshops or individuals with serious problems have greatly promoted workshop safety management, made employees realize that the whole workshop and all employees may suffer losses due to their own illegal behaviors, enhanced their awareness of self-supervision and mutual supervision, raised their awareness of safety and law-abiding, and made our "safety management" step up to a new level.

Second, fully implement the qhse management system in terms of safety.

1. Do a good job in traffic management. For the three pipe grab machines in our factory, our grass-roots hse inspection team conducts a comprehensive inspection of drivers and vehicles from time to time, including: holding certificates, operating special equipment and various records of equipment. When problems are found, they should be rectified immediately. If it cannot be rectified, contact relevant units for maintenance, and urge drivers to carry out seasonal maintenance and heat preservation before winter to ensure the safe operation of special vehicles. Educate and require employees who drive private cars to fasten their seat belts and try to take the shuttle bus to and from work in rainy days, foggy days and snowy days to ensure personal safety. Drivers' sense of responsibility is generally improved, thus ensuring traffic safety.

2, establish and improve the leadership responsibility system, the competent leadership is fully responsible for, at the same time do know fairly well about all the work. The cadre contract team system is implemented, and the problems that each team can solve are solved immediately, and the problems that cannot be solved are reported to the relevant departments as soon as possible. The leading inspection team of Gangxi Oil Pipeline Factory was established. The leading group shall inspect each workshop team every week, issue rectification notices to the teams that find problems, and order them to make rectification within a time limit, and accept them after rectification. The leading group meeting of Gangxi Oil Pipeline Factory was established, and the branch company issued the documents and held the group meeting in time to study and deploy all the work.

3. Do a good job in fire control. All workshops are equipped with the required number of fire extinguishers, and key parts and places are equipped with equipment and facilities required for fire emergency. In order to ensure the fire safety in winter, our factory organized personnel to remove all weeds in the factory during the National Day, thus eliminating the fire hazard. Organize employees to carry out fire drills, improve the emergency ability of employees to deal with emergencies, and master the use of fire-fighting equipment.

Three, the use of various forms to strengthen safety education, enhance the safety awareness of workers.

1. Strengthen supervision, conduct timely education and follow-up inspection for foreign construction personnel, and often conduct targeted safety education in combination with the actual situation on site, which regulates many unsafe behaviors of them, such as illegal use of fire, electricity and climbing. , to avoid some safety accidents.

2. Strengthen hse training, improve the quality of employees and conduct comprehensive training for employees. Organize special equipment personnel to study in time to ensure that the certificate-holding rate reaches 100%. Organize employees to conduct safety training three times a month and a standardized publicity, focusing on training standards related to each position. Conduct workshop education, team education and qhse knowledge training for new employees, and conduct assessment to ensure that the training content meets the actual post requirements. Make full use of Monday's safety meeting, pre-shift speech and other ways to carry out various forms of learning and training, effectively promoting the overall improvement of the quality of employees in various positions. Supervise employees to conduct self-study and learn what they should know, operating procedures and related documents. In order to promote the enthusiasm of employees for self-study, relevant knowledge such as post knowledge, post hazard factors, risk control measures and emergency treatment measures were tested. A good learning atmosphere has been formed among the employees of the whole factory.

3. After work, concentrate all staff on safety study and discussion, learn the safety operation procedures of each workshop and post, distribute study materials, timely convey and implement the spirit and requirements of superior documents, analyze and discuss recent domestic and international accident cases, draw inferences from other examples, find problems in combination with the company's reality, formulate preventive measures, and improve the comprehensive quality and safety management ability of safety officers. In addition, according to the seasonal characteristics, combined with the actual production situation of our factory and the problems existing last week, the precautions for next week were comprehensively analyzed and deployed, and the problems were found and solved in time, giving full play to the role of the safety management network.