Traditional Culture Encyclopedia - Photography major - What camera shoots will not be reddish?

What camera shoots will not be reddish?

How to obtain a reddish effect when taking photos

1. Adjust the white balance: When the actual color temperature of the shooting scene is lower than the color temperature set in the camera (white balance), the result will be The photo will be relatively yellowish or reddish: For example, the sky at the shooting scene is actually clear (sunlight mode: 5200K), but the white balance in your camera is set to cloudy mode (cloudy mode: about 6000K);

2. Use the "red intensifier" (a type of lens filter) to produce a strong red enhancement effect, such as for photographing autumn maple leaves, strawberries, etc. However, this filter should be very expensive! I don’t know the specific price below, you can search online;

Adjust the white balance.

1. First, turn on the camera, enter shooting mode, and click to select the white balance setting.

2. Then select "K" mode in the "Custom White Balance" mode on the white level setting page that pops up.

3. Then on the pop-up page, switch the dial to switch the desired color temperature.

4. In the process of setting the color temperature, you can set a number, then take a photo, and fine-tune it based on the imaging situation of the picture. If you feel there is a big deviation, go back to the settings again and take the same photo after setting to compare.

5. After setting the appropriate color temperature value, you can start shooting.

What should I do if the image color of Sony HDR-XR260E camera is reddish?

The reddish or bluish color is usually due to the white balance not being set properly~

In some extreme shooting Under the environment (such as very dim incandescent lamp, very bright fluorescent lamp lighting conditions), the automatic white balance can no longer correct the white balance according to the environmental tone (reaching the limit of the automatic capability). At this time, you need to manually adjust the white balance, the camera or The camera has several built-in manual quick adjustment white balance modes (such as incandescent lamp mode, sunlight mode, etc.). If these modes cannot achieve the correct white balance, then you need to customize the white balance. The method is to set the white balance in the current shooting environment after turning on the camera. Use a piece of white paper or any white thing to fill the entire lens range, and then press the white balance button (the operation methods of various models may not be the same, please refer to the instruction manual of each model for specific operation methods). At this time, you will basically know Get the correct white balance. If it still doesn't work, then one is a problem with the machine's grade and performance, and the other is a malfunction