Apple 6 is hot, the camera is black, and the flash doesn't work. What should I do?

The rear camera of IPhone6 can't be turned on. Do you want to turn it off first? Enter the iPhone6 camera mode. In the photo mode, click the flash logo in the upper left corner, switch to the open mode, and try to take a photo to see if the flash works.

There is also a special situation. IPhone6 has a variety of camera modes, among which time-delay shooting and panoramic view are adjusted by the system itself, and the flash is not set manually, so it cannot be turned on in some cases.

After all these are confirmed, they still can't be opened. Check the top of the back of iPhone6, next to the camera, to see if there is mechanical damage or it is blocked by the phone case. If there is a problem, rule it out first.

Also, if the flash is used for a long time and the temperature is high enough, the system will protect it, turn off the flash, and it will work normally after the temperature is restored. If forced to use, there will be a warning.

Detailed operation:

You can manually test whether the camera can be turned on normally. Slide up on the main screen to bring up the control interface, and click the flash function in the control interface to see if the flash will light up. If it doesn't light up, consider whether the flash is damaged.

Flashlight is damaged or the line is faulty. We can only look at the iPhone repair point, and let the professional iPhone after-sales service check it to see if there is something wrong with the flash or the line or something else. It is not recommended to disassemble the machine by yourself, otherwise other parts may be damaged accidentally.