Introduction to English for Safety Engineering Course

I urgently need English course descriptions for the following courses! !

Description: I have limited knowledge and can't describe most

Introduction to English for Safety Engineering Course

I urgently need English course descriptions for the following courses! !

Description: I have limited knowledge and can't describe most subjects in English, but I think the name itself is a good description. And there are many aspects that can be learned in the same subject, such as photography. I don't know what kind of photography you studied, so I can't describe it to you.

Applied mathematics applied mathematics

Principles of Marxist political economy

Speech and eloquence speech and eloquence

I don't know what that is.

"Ideological and political education" social practice "social practice,

Official document writing,

Photography, photography,

situation and policy

Management,

Enterprise management.

Introduction to computer science

Operating system (Linux),

Network database technology and application,

Website development technology

Network detection and security technology,

The establishment and maintenance of local area network,

Network security technology applies noerk security technology,

Data security and recovery data security and recovery,

Animation design animation,

Website planning and engineering design Website planning and engineering design

Computer network technology,

Web design, Web design,

Linux network technology,

Computer English (is this course available? )

Encryption and decryption of computer information Computer encryption and decryption,

Computer aided design,

Wireless LAN technology,

Graphics and image processing.

Two. English translation of safety engineering course! ! ! !

A, line operation safety management practice

Safety engineering literature retrieval

Safety testing technology

Safety economics

Safety practice in safety production practice

Fire and explosion prevention technology

Fire-proof and explosion-proof technology of chemical equipment and its foundation

Chemical instruments and automation

occupational guidance

Special equipment safety technology

Hazard identification and safety evaluation

Occupational health Occupational health

Ⅲ. Description of Safety Engineering Course in South China University of Technology ~

Advanced Mathematics II (a book published by South China University of Technology), descriptive geometry and mechanical drawing (a book published by South China University of Technology) are the key points. There are not many words in English in one semester (Shanghai Foreign Language Education Press). There will be one exam after coming in, divided into three classes: A B C.

Introduction of South China University of Technology Admissions Network;

This major is the earliest undergraduate major in safety engineering in South China, based on system theory, information theory and cybernetics, and based on safety science. It integrates mechanics, chemistry, machinery, management, law, computer and other disciplines, and has a huge demand for talents. This major trains high-quality compound talents who are suitable for safety technology and management urgently needed by safety production supervision and management departments at all levels and large and medium-sized enterprises.

Students mainly learn the basic theory and professional knowledge of the system, participate in various extracurricular scientific research practice training programs, safety production publicity activities organized by regional safety management departments, production enterprise internships and other practical links, closely link with engineering practice, strive to exercise practical ability, cultivate innovative consciousness, and have good ability to analyze and solve practical problems by using what they have learned.

After graduation, students can enter various departments such as Safety Supervision Bureau and Technical Supervision Bureau, as well as various large and medium-sized enterprises and research institutes, and engage in safety scientific research, safety design, safety evaluation and consultation, safety supervision and management, safety education, safety politics and law, etc. They can also work in departments such as fire protection, commodity inspection, customs, transportation and insurance claims.

Main courses: computer series courses, public basic courses, safety management, safety equipment engineering, safety ergonomics, safety system engineering, safety engineering chemistry, introduction to environmental engineering, engineering mechanics, accident investigation and analysis technology, mechanical design basis, modern safety production management, safety evaluation, safety production standards and regulations, engineering insurance, etc.

Text Translation of Safety Engineering English

You want to translate all the books?

English translation of college course introduction is imminent. . For accuracy, you can increase the reward.

Mobile communication: This course is a specialized course of communication engineering. This course introduces the basic concept, basic position, basic principle, basic technology, typical system and future development of mobile communication. Through the study of this course, students can understand the development trend of mobile communication system and master the basic skills and key technologies of mobile communication. Its purpose is to enable students to adapt to the rapid development of modern communication needs, to have a deeper understanding of mobile communication principles, digital mobile communication systems, mobile communication technology and engineering, and to have a strong theoretical foundation for personal communication and mobile communication.

Professional comprehensive experiment: The comprehensive experiment of communication engineering major is set according to the training goal of this major. The subject design of this experimental course mainly includes the direction of communication system and information system. All the topics are comprehensive, designed or engineering application-oriented, covering the main courses of this major, with certain depth and difficulty. It is the comprehensive application of many disciplines in this major, and cultivates students' practical operation ability and innovative thinking.

Data communication and network: The task of this project is to teach the principle of computer network communication, based on the hierarchical network model introduced into the system and combined with the latest development of new technologies. Through the study of the course, students can have an overall understanding of computer neorks, have a clear concept of the main types of computer neorks and mon neork protocol, understand the new development of new technologies, and understand the basic principles of computer neorks and neork technology, so as to lay a foundation for further development and maintenance.

Digital Simulation and Analysis of Communication System: This course is the practice of undergraduate students on the basis of theoretical research, aiming at cultivating students' practical skills and abilities. In particular, let students master the digital communication based on CPLD/ FPGA chip, the modeling and design ability of units and systems using VHDL language, and the construction process of SystemView software and communication system model. Further deepen the understanding of the principle of communication system.

Introduction to Information Security: This course is a specialized course for communication engineering majors. The course is closely integrated with practice, which is practical. Its purpose is to make students fully understand the basic theory and practical skills of information security, master the basic methods of information system security, cultivate the awareness of information security protection, and enhance the security capability of information systems. Understand the security threats and preventive measures existing in modern information systems; Learn and understand more security architecture and models, basic application passwords and password knowledge; Identity authentication technology, learn and master the basic technology of neork firewall, virus and hacker attack defense technology, mon system security enhancement technology, learn the new technology and development trend of information security.

Embedded system design: The course of embedded system design is based on embedded microprocessor based on ARM, and tells the basic knowledge and application of embedded system. Focusing on 32-bit ARM processor and open source Linux operating system, this paper describes the concept of embedded system, the composition of software and hardware, the development process and design method of embedded Linux application and driver development. The knowledge of this course will lay a solid foundation for students to engage in the research and development of embedded systems in the future.

Optoelectronic: It is a technology formed by photon photoelectron technology and electronic technology. Electronics mainly studies the interaction between light and matter and energy conversion technology. By means of laser and electronics, the theoretical model of modern electronics and the characteristics of optical conversion into electronic processing methods are a new comprehensive interdisciplinary subject and have become a very important part of modern information science. Through the study of this course, students should have a comprehensive and systematic understanding of the basic concepts, basic technologies and basic devices in optoelectronics, cultivate their ability to analyze and solve engineering problems, and lay a foundation for further study of the course and future work in the field of optoelectronics information.

Operating system: This course is a theoretical course of communication engineering. The "operating system" is an integral part of the computer system, which is responsible for effectively managing the resources in the system, properly organizing various activities, coordinating the whole computer system consistently and efficiently, and making the computer system run normally. Through the study of the course, students can master the basic contents and implementation methods of the operating system on the basis of deeply understanding the overall concept of computer system, and provide necessary software and basic skills for future research and development.

ⅵ What should safety engineering major learn?

There are two categories of university study: the first category is basic subjects (which must be studied in any major), such as advanced mathematics, physics and other engineering courses. When I think of the high number of the year, I still feel overwhelmed. The second category is professional disciplines, which are mainly based on future practice and are relatively difficult, such as safety psychology, safety principles and so on.

Then, let's talk about the breakdown of our major. After learning the framework knowledge, we will choose the final specialization direction according to our own wishes. (pictured above, food safety), this knowledge is spread out in the branch of basic principles, and it is very important to decide your final employment destination.

I hope I can help you. If you have any questions, please leave a message.

Seven, safety engineering professional introduction

Business development goals:

Cultivate compound senior engineering and technical personnel who can engage in safety technology and engineering, safety science and research, safety supervision and management, safety and health environment detection and monitoring, safety design and production, safety education and training.

Business training requirements:

Students in this major mainly study disaster prevention technology and engineering and ventilation, purification and air conditioning, safety monitoring and control, safety principles, safety system engineering, safety supervision and management in mines and underground buildings, transportation, aerospace, factories, property, commercial buildings and ground buildings.

Graduates should have the following knowledge and abilities:

1. Solid foundation in natural science, good foundation in humanities and social sciences, and strong comprehensive foreign language ability;

2. Master fluid mechanics, engineering thermodynamics and heat transfer, engineering mechanics, analytical chemistry and physical chemistry, combustion and explosion;

3. Master the basic knowledge of safety principles, safety ergonomics and safety system engineering;

4. Master electronic, electrician and safety monitoring instruments and technologies;

5. Master the knowledge and ability of design, construction, supervision and management of safety engineering, ventilation and air conditioning engineering;

6. Master the ability to design, simulate and manage safety engineering and ventilation engineering with computer.

Main course:

Main disciplines: mining engineering, mechanics, system science.

Main courses: combustion and explosion, safety engineering, ventilation and air conditioning purification, safety monitoring and monitoring, occupational hygiene, fluid mechanics and fluid machinery, engineering thermodynamics and heat transfer, analytical chemistry and physical chemistry.

The main practical teaching links: cognitive practice, production practice, computer application and computer practice, curriculum design, graduation practice and design, generally arranged for 40 weeks.

Study time: four years

Degree awarded: Bachelor of Engineering

Similar majors: environmental engineering, safety engineering, disaster prevention engineering, water quality science and technology, water supply and drainage engineering, groundwater science and engineering, wind energy and power engineering, environmental science and engineering, urban planning, radiation protection and environmental engineering.

I hope it helps you! ! ! ! ! ! ! ! ! ! !

ⅷ University english introduction! ! Urgent! ! It's really urgent! !

2A Advanced Mathematics -2A Advanced Mathematics

Introduction to Building Environment and Energy Application Engineering —— Building Environment and Energy Engineering Technology (omit "Introduction" and replace it with "Technology"). The introduction of this kind of thing sounds like a beginner when translated into English.

University chemistry-chemistry (omit the university because the other party already knows that you are a university)

Descriptive geometry and engineering drawing-geometric and technical drawing

College English reading and writing translation, college English listening, and college oral English-specialized English learning (combine these three subjects and change them into "specialized English", because listening and reading abroad are done by primary school students, and you will find it funny to write like that)

These are the names of your courses. As for details and conciseness, these are not enough (although I study design, I know the general content of your course, but the US may not know it). If you can introduce your topic in Chinese, I can also help you translate it once.

ⅸ safety engineering specialized course.

Public courses:

Compulsory courses include: ideological and moral cultivation and legal foundation, outline of China's modern history, basic principles of Marxism, introduction to * * * thought and Socialism with Chinese characteristics's theoretical system, college English, college computer foundation, C language programming, advanced mathematics, linear algebra, probability theory and mathematical statistics, college physics, physical experiments, etc. , a total of 54 credits. Elective courses include: humanities and social sciences module, economics and management module, school characteristics module and professional communication English series module requirements.

Basic course of engineering and specialty (basic course of discipline):

Compulsory courses include: engineering graphics, engineering mechanics, engineering fluid mechanics, thermal engineering foundation, mechanical design foundation, safety engineering chemistry foundation, chemical engineering principle, electrician and electronic technology, microcomputer principle and its application, detection technology, safety engineering introduction, safety management and safety system engineering, with a total of 38 credits; Designated elective courses are: safety regulations, safety ergonomics, safety inspection and evaluation of special equipment, environment, safety and health engineering, with a total of 7 credits; Elective courses include: control engineering foundation, AUTOCAD technology, Matlab programming and application, reliability technology.

Professional courses:

Compulsory courses include: fire and explosion control technology, boiler and pressure vessel safety technology, with a total of 6.5 credits; Designated elective courses include: chemical machinery and equipment, mechanical safety engineering, electrical safety engineering, fire engineering and design, industrial ventilation and dust removal, safety evaluation, engineering budget and economy, environmental protection technology and equipment (bilingual course), etc. , a total of 16.5 credits; Optional courses include: industrial anti-virus technology, noise and vibration control technology, building safety technology.

Pay attention to practice:

The concentrated practice links include ideological and political theory practice, ideological and moral behavior practice, metalworking practice, electronic practice, basic course design of mechanical design, course design of detection technology, course design of safety engineering, cognitive practice, production practice and graduation design.

Extracurricular teaching activities:

The modules are divided into public basic modules (college students' learning guidance, situation and policy, military training), extracurricular scientific and technological activities (scientific research practice, subject competition, thesis patent, extracurricular science and technology), extracurricular social activities (cultural and sports activities, social practice, volunteer activities), and professional education modules (professional frontier lectures, professional English, professional research, and skill certificates).

What are the specialties of safety engineering, including basic courses, and what are these disciplines specifically about?

Main course:

Main disciplines: mining engineering, mechanics, system science.

Main courses: combustion and explosion, safety engineering, ventilation and air conditioning purification, safety monitoring and monitoring, occupational hygiene, fluid mechanics and fluid machinery, engineering thermodynamics and heat transfer, analytical chemistry and physical chemistry.

1. Solid foundation in natural science, good foundation in humanities and social sciences, and strong comprehensive foreign language ability;

2. Master fluid mechanics, engineering thermodynamics and heat transfer, engineering mechanics, analytical chemistry and physical chemistry, combustion and explosion;

3. Master the basic knowledge of safety principles, safety ergonomics and safety system engineering;

4. Master electronic, electrician and safety monitoring instruments and technologies;

5. Master the knowledge and ability of design, construction, supervision and management of safety engineering, ventilation and air conditioning engineering;

6. Master the ability to design, simulate and manage safety engineering and ventilation engineering with computer.