Traditional Culture Encyclopedia - Photography major - Detailed explanation of construction steps of TV background wall panel

Detailed explanation of construction steps of TV background wall panel

If the TV background wall in the living room is well designed, it can present a more beautiful and fashionable effect. However, many people are not clear about the construction steps of TV background wall panel when decorating. What is the specific installation process? Let's get to know each other.

Wall treatment

Before installation, the base of the background wall should be treated with surface treatment, such as cleaning the wall surface and leveling uneven places. It is necessary to ensure that the wall base is flat, smooth and particle-free, and to ensure the stability and firmness of the wallboard when it is installed.

Measure size

The size and model of wallboard are different. When purchasing wallboard quantity, it should be determined according to the wall area. In order to avoid material waste, the length and width of TV background wall should be measured first, and then the number of wallboard can be accurately calculated.

Cutting wallboard

Then cut the wallboard according to the size of the TV background wall. If it is a whole TV background wall panel, pay attention to the accuracy of length and width when cutting, and then cut it into the same size as required, otherwise it will lead to deviation.

Installing skirting board

Before installing the TV background wall panel, the matching skirting line should be installed first. First, fix the hooks with expansion screws, which should be about 8CM, and the distance between the two hooks should be about 60CM. Pay attention to the direction when you hang up. The oblique angle of the baseboard is about 45. Hang this end on the hook, or the skirting line will not be fixed.

Installing wallboard

The wallboard is fixed with expansion screws. The installation sequence is from bottom to top, from left to right, insert the plate into the skirting line, and fix it with expansion screws at a distance of 1.5CM from the upper end. The expansion screw enters the middle of the plate, fixes each wallboard, knocks it tightly with a hammer, and finally fixes it with special glue.

Mounting batten

No matter whether the TV background wall panel is full-height or half-height, it is necessary to install battens at the upper end, which can not only play a fixed role, but also be beautiful. In order to ensure the tight paste, you can paste the layering on the wall with an interval of about 3CM, and then paste it well, which greatly enhances the adhesion of the layering.