How to take photos of Huawei mate 10?

Knowing the basic functions of a camera can help you take better photos:

1, basic photo: turn on the camera, enter the photo interface, and then click the photo. You can also set the volume key as the shutter key, and press the volume key to take pictures.

2. Select the photo mode: In the camera photo interface, slide the screen to the right to enter the photo mode interface, and you can select other photo modes as needed.

3, adjust the focal length: in the camera interface, separate two fingers, you can close the object; Close your fingers to reduce the subject. When the distance close to the subject exceeds the optical zoom focal length of the camera, the image quality will decrease. After the two fingers are separated, the focal length adjustment area will appear on the side of the camera interface. You can adjust the focal length by dragging the slider in the adjustment area.

4. Adjust the exposure: When the photographing environment is too bright or too dark, the camera can automatically adjust the exposure to improve the photographing effect. The greater the exposure, the brighter the picture; The smaller the exposure, the darker the picture. In the camera interface, click on the screen, and then drag up and down next to the focus to quickly adjust the exposure.

5. Turn on or off the flash: When taking pictures in a dim environment, you can turn on the flash to increase the brightness of the environment. In the camera interface, click to switch between the following four modes:

Automatic: the camera automatically judges whether it is necessary to turn on the flash according to the ambient light.

Off: Don't turn on the flash when taking pictures.

On: Turn on the flash when taking pictures.

Always on: The flash is always on in the shooting interface.

6. Turn on geographical location: record geographical location information when shooting, and you can view photos through the geographical location information in the photo album. In the camera interface, slide the screen to the left to enter the camera setting interface, and then turn on the geographical position switch.